Tsubaki Guide to Forestry Products

More documents

Recommendations

Info

When innovation really mattersDrive ChainWelded Steel Chain10Conveyor Chain198711SawmillPlanerMill1235 45136291
DELIMBERLOGUNSCRAMBLERApplication: Log Unscrambler Savings: $55,700.00Tsubaki solution: Tsubaki 200HT was selected to replacean original design using standard chain,increasing the life from 1 to 13 months.It really mattered to this Tsubaki customerCOST SAVINGS!ChallengeImpact loads from harsh operating conditions are common with Delimber operations.Power-lockSprocketSplitSprocketSolutionDrive chain: Tsubaki standard premium grade chaincomplete with G7 feature of PerforMax lube-groovedbushings and ring coined connecting links.Typical size range for this applicationRS120-2 cott to RS140-2 cottSprockets: Premium Tsubaki sprockets with high carbon1030 or 1045 material allow for a consistent hardenedtooth that is a necessity for the demandsof this application.ChallengeLog diameter varies from mill to mill. Operating overload and jam-ups are common.Sand and grit conditions can lead to abrasion on mill chains.SolutionDrive chain: HT chain provides up to 30% greater ultimate tensilestrength over standard roller chain.Mill Chain: IBR (induction hardened barrels and rivets)for abrasive resistance.Typical size range for this applicationRS100HT to RS160HTWR82XHD, WR124(XHD), WR132(XHD)Sprockets: Remote access and the need for quick changeoutcan be solved by split design mill chain sprockets.RS 140-2 ChainForward/backward operation can result in keyway backlash. Theuse of Powerlock sprockets eliminates the need for a keyway.HT Chain92 93
Page 1: Tsubaki of Canada Limited1630 Drew
Page 6 and 7: SPEEDMASTER DRIVE CHAINApplication:
Page 8 and 9: TrCURVED LAMBDASELF-LUBRICATING DRI
Page 10 and 11: HT SERIES CHAINSUPER-HSERIES CHAINW
Page 12 and 13: SHARP TOP CHAINWhen grip really mat
Page 14 and 15: INTRODUCTION TOCONVEYOR CHAIN & ATT
Page 16 and 17: STANDARD ATTACHMENT CHAINWhen exped
Page 18 and 19: STANDARD ATTACHMENT CHAINORDERING A
Page 20 and 21: INTRODUCTION TOMILL & DRAG CHAINApp
Page 22: 1630 Drew Road, Mississauga, ON L5S
Page 26 and 27: SPROCKETSWhen quality really matter
Page 28 and 29: NO. 80 “QD” STYLE 1" PITCHNO. 8
Page 30 and 31: NO. 100 FINISHED BORE 1 1/4" PITCHN
Page 32 and 33: NO. 100 DOUBLE SPLITTAPER 1 1/4" PI
Page 34 and 35: NO. 140 “QD” STYLE 1 3/4" PITCH
Page 36 and 37: MILL CHAIN SPROCKETSWhen toughness
Page 42 and 43: SPLIT TAPER BUSHINGSWhen compatibil
Page 44 and 45: “XT” STYLE BUSHINGS“XT” STY
Page 46 and 47: SHOCK RELAYSWhen control really mat
Page 50 and 51: CROSS CUT SLASHERDEBARKER INFEEDCON
Page 52 and 53: EDGERApplication: Bull Edger DriveS
Page 54 and 55: DROPSORTERApplication: Drop Sorter
Page 56 and 57: OTHER SIGNIFICANTFORESTRY APPLICATI

Tsubaki Guide to Forestry Products

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?