REF.JMATP33TP34TP35RESULT ON<strong>TRS</strong><strong>5000</strong>TP33 Texas-Cry 3GENFORD-Copy onTPX2.PW: 03 ID: 80 81DCBEMC: 01 LCK: 0010 DST40TP33 Texas-Cry 3GENFORD-Look at TP ManualPW: 03 ID: 80 FB4FA6MC: 01 LCK: 0010 DST80TP34 Texas-Cry 3GENTOYO-Look at TP ManualPW: 37 ID: 96 3DF27FMC: 80 LCK: 1111 DST40Texas Crypto ++Look at TP ManualPW: 36 ID: 98 FAA182MC: 80 LCK: 1111 DST80TP35 Texas-Cry 3GENTOYO-Copy onTPX2PW: 33 ID: 0F 348CBCMC: 0C LCK: 1111 DST40ACTUAL TRANSPONDERTexas Code Crypto. 2Gen. Wedge.FORDCode example on a TP33 / ID 6F-63Texas Code Crypto. 3Gen. Wedge.FORDCode example on a TP33 / ID XXTexas Code Crypto. 2Gen. Wedge.TOYOTACode example on a TP34 / ID XXTexas Code Crypto. 3Gen. Wedge.TOYOTACode example on a TP34 / ID XXTexas Code Crypto. 2Gen. wedgeTOYOTACode example on a TP35 / ID 6F-704 .Copying keysThe steps to be followed in order to make a copy are:4.1 Local mode with no PC connection•After entering the customer’s original key in the antenna housing, pr<strong>es</strong>s theread button. A m<strong>es</strong>sage will appear advising the transponder’s JMA typereferencethat contains the original key read, as well as the transponder onwhich JMA advis<strong>es</strong> the duplicate.Covers all fixed and most encrypted transponders (Texas/Philips). If thetransponders were encrypted from other brands such as Megamos or Temic,the device will show the transponder’s identification with its JMA referenceand will advise how to proceed to activate the key, generally redirecting tothe transponder’s manual and the use of a programming machine (TRACK7).•Next, and following the step-by-step indications on the display, the key isremoved and the new key entered on which the copy will be made togetherwith its corr<strong>es</strong>ponding transponder.When making the copy, it is advisable to enter the key in a non-mechanicalmanner, since due to the shavings or burrs that may remain on the keythat may interfere with the equipment’s electronics if they fall through theantenna or because the copy may be defective, it is preferable to cut the keyafter succ<strong>es</strong>sfully completing this section.•Once the copy has been made, the device itself will indicate whether thekey is correct or erroneous.In the case that more than one copy of the same key is required, repeat allthe steps in the previous paragraphs, keeping in mind that it is advisableto use the original key provided by the customer as the base and the exacttransponder with the reference recommended by JMA as the “copy base”.The only exception is for the Philips Crypto, for which as many copi<strong>es</strong> asd<strong>es</strong>ired can be made without having to go through the entire proc<strong>es</strong>s again.englishIf you have any problems or qu<strong>es</strong>tions,please contact technical support:mailto:sat@jma.<strong>es</strong>If the key entered has a first generation Texas Crypto transponder that is notrecognised by the <strong>TRS</strong> <strong>EVO</strong> and thus do<strong>es</strong> not appear in the above table, thedisplay will show the following m<strong>es</strong>sage:Texas CryptoCOPY ONTPX2PW: 00 ID: 00 30B5B9MC: 02 LCK: 0010 DST40TTexas Code Crypto. Wedge Format.Code example on a TPXX / ID 6F-XX4.1.1 Information visible on the display in localconnection modeWhen cloning the encrypted transponders, Texas as well as Philips, there isno need for a connection to the PC or to the external cloning device coupling(TPX Cloner + TPH Cloner), given that in the <strong>TRS</strong> <strong>EVO</strong>’s new and compactd<strong>es</strong>ign, all functionaliti<strong>es</strong> have been included in one unit.During initialisation, the following m<strong>es</strong>sag<strong>es</strong> will be shown on the display:JMA <strong>TRS</strong>-<strong>5000</strong> <strong>EVO</strong>S/N: 0123456789ABCDEFFWr: xxClr: TPX CLoner FoundThe TPX1 and TPX4 can be programmed as many tim<strong>es</strong> asd<strong>es</strong>ired. This is not the case with the TPX2. Because it isan OTP (one time programmable) transponder, it can onlybe recorded once, after which it will be disabled for futurecopi<strong>es</strong> on the same transponder.Similarly: if the key entered do<strong>es</strong> not have a transponder, the display willshow the following advice m<strong>es</strong>sage:NO CHIPNO TRANSPONDERIt must be mentioned that some high range cars,BMW, MERCEDES use a rolling code system (evolutionarilyencrypted), from the appearance of the first vehicl<strong>es</strong> from around1995, and although the machine shows that the copy is possible,this cloning will not be valid because the cod<strong>es</strong> constantlyevolve following an unknown protocol. Avoid duplicating thekeys for vehicl<strong>es</strong> with manufacturing dat<strong>es</strong> after 1995.The three first rows show the name, serial number and firmware version ofthe <strong>TRS</strong> <strong>5000</strong> <strong>EVO</strong>.The last row shows, succ<strong>es</strong>sively and alternately, the m<strong>es</strong>sag<strong>es</strong> thatindicate whether or not the Texas and Philips encrypted transponder copyfunctions are enabled.The m<strong>es</strong>sage “TPX Cloner Found” indicat<strong>es</strong> that the <strong>TRS</strong> <strong>EVO</strong> is operationalfor cloning the Texas Crypto.Next, the “TPH Cloner Found” m<strong>es</strong>sage will appear, which indicat<strong>es</strong> that the<strong>TRS</strong> <strong>EVO</strong> is also operational for cloning the Philips Crypto.TPH Cloner foundTPH ver.: 39.1.6Finally, after the m<strong>es</strong>sage “TPH Cloner found”, the firmware version will bedisplayed that controls the cloning of the Philips Crypto and which can be easilyupdated using the CL USB port.
english4.1.2 Information supplied when copying a Texas CryptoNext, the proc<strong>es</strong>s will be shown for cloning a Texas Crypto transponder thatis mounted for example on a Ford Focus (2007) and the m<strong>es</strong>sag<strong>es</strong> shown onthe <strong>TRS</strong> <strong>EVO</strong> display:Insert keyPr<strong>es</strong>s READOnce the original key is analysed, the following detailed information will b<strong>es</strong>hown:• JMA code for the chip that holds the key (TP 20).• Transponder type and manufacturer (Texas Crypto).• Manufacturer of the vehicle that us<strong>es</strong> it (FORD).• The JMA transponder that must be used for cloning this key (TPX2).• Information about the transponder’s internal structure, which will bedifferent depending on the chip manufacturer. As an example, a FORD keywould be (Password: 03, Manufacturer’s code: 01, Serial number: 00 andUser serial number: 2FAC03, bits locked, which refers to the write-protectedinformation pag<strong>es</strong>, 0010 (Pag3 LOCK) and finally if the old DST40 algorithmor the new DST80 is used).different depending on the chip manufacturer. As an example, a CITROENkey would be (Serial number: B9B66969, if it is write-protected (LOCK) andthe type of coding used (Manch<strong>es</strong>ter)).TP12-PCF7941 PHCCopy on TPX4ID: B9B66969MODE LOCK MANCHESTERTo activate the TPH Cloner mode supported by Philips Crypto, the proc<strong>es</strong>scommenc<strong>es</strong> by pr<strong>es</strong>sing the COPY key on the original key.Do not remove the keyPr<strong>es</strong>s COPYWhile the HT2 algorithm used by Philips Crypto second generation is beingloaded into the memory, the <strong>TRS</strong> <strong>EVO</strong> will display the following m<strong>es</strong>sage:Please wait............................TP20 Texas Cry FORDCopy on TPX2PW: 03 ID: 00 2FAC03MC: 01 LCK: 0010 DST40After entering the JMA (TPX2) transponder on which the cloning on the antennawill be carried out, pr<strong>es</strong>s the COPY button.When the FPGA has loaded the corr<strong>es</strong>ponding memory, the following will b<strong>es</strong>hown on the display:TPX Cloner ready............................Ready To CopyPr<strong>es</strong>s COPYAnd the <strong>TRS</strong> <strong>EVO</strong> will be ready for analysing and completing the followingsteps, requ<strong>es</strong>ting a return to read the original key:The <strong>TRS</strong> <strong>EVO</strong> will begin to analyse the transponder from the original keyInsert ORIGINAL KeyPRESS [READ]entered.Please wait............................Next, the transponder’s type and brand will be indicated, as well as whetherit is an original transponder or a copy (Philips crypto type):Once discovered, this information will be written on the TPX2 and it willbeep once if the copy is executed correctly.PHILIPS CRPTOPhilips Crypto TypeCopy OKExtract Key4.1.3 Information supplied when copying a Philips Crypto II.To finalise, it shows the cloning proc<strong>es</strong>s of a second generation PhillipsCrypto transponder, HT2, used by a Citroen C3 and the m<strong>es</strong>sag<strong>es</strong> that woulddisplay <strong>TRS</strong> <strong>EVO</strong>.Insert keyPr<strong>es</strong>s READA Virgin TPX4 must then be entered to configure it in capture mode (Sniff)and to be able to capture the data, verifying that the copy has been madecorrectly.Insert Virgin TPX4Pr<strong>es</strong>s [COPY]If the TPX4 has been used before, the <strong>TRS</strong> will detect that and you can use itagain, as many tim<strong>es</strong> as you want, by deleting it.A m<strong>es</strong>sage will appear on screen indicating that the first step has beencompleted succ<strong>es</strong>sfully.Once the original key is analysed, the following information will be shown:• JMA code for the chip that holds the key (TP 12).• Chip model included (PCF7941).• Transponder type and manufacturer (PHC – Philips Crypto).• The JMA transponder that must be used for cloning this key (TPX4).•Information about the transponder’s internal structure, which will beTPX4 NOT BlankDelete? CP=YESSucc<strong>es</strong>sGo to car & sniff