Rover 75 Owner's Handbook - 3rd Edition - Eng - RoverClub-BG.com

SeatsDRIVER’S SEAT MEMORY FACILITY*1DO NOT adjust the seatswhile the car is moving.Before activating the seatmemory and lazy seat functions,ensure that the areaimmediately surrounding theseat is clear of obstructions andthat all occupants are clear ofmoving parts.H2755Your car can memorise three different driver seatingpositions. To store the positions in the system memory, thestarter switch must be turned to the first or second position.Adjust the seat to the required position and store the settingsby pressing and holding the memory store switch (‘M’) and,with the memory store switch still depressed, press and releaseone of the pre-set buttons (‘I’, ‘II’ or ‘III’). Finally, release thememory store switch; a single chime will sound to confirmthat the operation was successful.To recall a stored position after the seat has been moved byanother driver, open the driver’s door and press theappropriate memory pre-set button. The seat will return tothe position stored by that memory pre-set, a double chimewill sound to confirm that the operation is complete.Lazy seatsThe lazy seat facility enables the handsets or keys to be usedto recall seat positions, when you unlock the doors.Press and hold the handset unlock button or turn and hold thekey in the unlock position, the driver's seat moves to theposition stored in pre-set 1. An alternative driver's setting canbe programmed using pre-set 2. As before, position the seatand programme pre-set 2 then, when the spare key is used toactivate ‘Lazy seats’, pre-set 2 will be selected.Operating tip: If a pre-set isselected accidentally, stop seatmovement by pressing any of theseat control buttons.NOTE: If the car is in motion, thepre-set will need to be pressedand held for the seat to move.This is to prevent inadvertentoperation of the memorypre-sets, which could cause theseat to move into a position inwhich the driver is unable to drivesafely.23