Rover 75 Owner's Handbook - 3rd Edition - Eng - RoverClub-BG.com

Bulb ReplacementOutboard headlights (dipped beam)Turn the front wheels to full left or right lock. This willprovide room for you to reach into the wheel arch to removethe headlight access panel.Replacement bulb: H7 55 watt.4134H32572Using a screwdriver, rotate the turnbuckle a quarter turn toleft or right to release the access panel. Push the panel up asfar as it will go and then disengage the bottom of the panel toremove (see upper inset). It is then possible to reach the backof the combined headlight/sidelight unit.1. With the access panel removed, reach behind theheadlight and pull to remove the rubber cover.2. Pull the electrical connector from the back of theheadlight bulb.3. Unhook the wire securing clip.4. Remove the bulb.NOTE: When replacing the bulb,ensure the squared section of thebulb mounting plate (4) isvertically aligned. Insert the newbulb fully and hold in thisposition while fitting the wiresecuring clip, and beforeattaching the electricalconnector.181