Rover 75 Owner's Handbook - 3rd Edition - Eng - RoverClub-BG.com

Wheel ChangingPositioning the jack4NEVER work beneath thecar with the jack as theonly means of support. The jackis designed for wheel changingonly!H2722Position the jack on firm level ground under the jacking pointnearest the wheel to be removed. Note that the domed headof the jack must fit into the corresponding recess in the sillplate (see inset in illustration).Turning the jack screw by hand, raise the jack until the jackhead fits snugly into the recess in the sill plate. Ensure that thebase of the jack is in full contact with the road surfaceNever jack the car usingany jacking points otherthan the designated pointsshown. Serious damage to thecar could occur.165