i-Dream Drill

CARBIDEHSSDREAM DRILLS-INOXRECOMMENDED CUTTING CONDITIONSEMPFOHLENE SCHNEIDKONDITIONENi-DREAMDRILLSCARBIDE, DREAM DRILLS - INOX with COOLANT HOLES, TiAIN COATEDVOLLHARTMETALL DREAM BOHRER - INOX mit KÜHLKANAL, TiAlN-BESCHICHTETDREAMDRILLS-GENERALDREAMDRILLS-INOXDREAMDRILLS-MQL TYPEDREAMDRILLSfor HARDENEDSTEELSGENERALCARBIDEDRILLSNC-SPOTTINGDRILLSDH451, DH452, DH453 SERIESWORKMATERIAL34568101214161820STAINLESSSTEELSN740056004400370028002200190016001400125011200.040.050.050.060.080.100.120.150.200.220.24STAINLESSSTEELSSTRENGTH < 800 N/mm 2 > 800 N/mm 2 < 10% Si> 10% SiDIAMETER S N S N S N S N S N S N S470036002800240018001400120010009008007200.020.030.030.040.060.080.100.120.150.170.19▶ Recommend to reduce the feed rate as followingFeed 100% : DH451(3xD), DH452(5XD)Feed 85% : DH453(8xD)ALUMINUM2300017500140001170088007000580050004380390035000.120.180.200.250.300.400.500.600.801.001.20ALUMINUM185001390011000930070005600460040003500310028000.100.150.180.250.300.350.400.500.600.700.80TITANIUMTi ALLOYS5300400032002650200016001300110010009008000.030.040.050.060.070.080.100.120.140.160.18CARBONSTEELSALLOY STEELS13000100008000660050004000330028002500220020000.040.050.050.060.080.100.120.150.200.220.241600011900950080006000480040003400300026502400Unit : mmNON FRERROUS0.080.100.120.150.180.220.260.300.400.450.50N = R.P.MS = Feed per Revolution (mm/rev.)MULTI-1DRILLSHPD DRILLSGOLD-PDRILLSWORMPATTERNDRILLSSTRAIGHTSHANKDRILLSTAPERSHANKDRILLSNC-SPOTTINGDRILLSCENTERDRILLSSPADEDRILLSTECHNICALDATA72• phone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr