i-Dream Drill

MATERIAL GROUPSTANDARDSW.NrGERMANYDINFRANCEAFNORGREAT BRITAINB.S.EN & OTHERCLASSIFICATIONSU.S.A.AISI42 - Titanium, alloys - Hardness < 270 HB 30 - Tensile strength < 900 N/mm 2Ti Al 4 Mn 43.7144 LN3.7124 LN3.7164 LN3.7174 LNTi Al 5 Sn 2Ti Cu 2Ti Al 6 V 4Ti Al 6 V 6 Sn 2TA 10-14, TA 17TA 1843 - Titanium, alloys - Hardness 270-300 HB 30 - Tensile strength 900-1,300 N/mm 23.7124 LN Ti Cu 23.7144 LN Ti Al 6 Sn 2 Zr4 Mo23.7154 LN Ti Al 6 Zr 5TA 10-13, TA 283.7164 LN Ti Al 6 V 43.7174 LN Ti Al 6 V Sn 23.7184 LNTi Al 4 Mo 4 Sn 2Ti - 2ALTi AL3.7174LN, 3.7148LN50 - NICKEL51 - Nickel, unalloys - Hardness < 150 HB 30 - Tensile strength < 500 N/mm 2a2.1504 LN2.40422.4060Ni Al BzNi 99 CSiNi 99.6NA 11, NA 12 Nickel 200Nickel 2702.4062 Ni 99.4 Fe52 - Heat resisting nickel alloys - Hardness < 270 HB 30 - Tensile strength < 900 N/mm 22.4360 LN2.4374 LN2.4617Monel 400Monel 500Hastelloy B 2Nimonic 752.46652.48122.4816Hastelloy XHastelloy CInconel 600HR 2033027-76Hastelloy CHaynes Alloys 2631.48762.4983Incoloy 800Udimet 50053 - Heat resisting nickel alloys - Hardness 270-410 HB 30 - Tensile strength 900-1,400 N/mm 22.46312.46322.4634Nimonic 80 ANimonic 90Nimonic 105Nimonic 802.46622.46682.46692.4670 LN2.4674 LN2.48562.6554 LNNimonic 901Inconel 718Inconel X-750Nimocast 713Nimocast PK 24Inconel 625WaspaloyHR 8HR 401, 601Rene 4160 - COPPER61 - Copper, unalloys - Hardness < 100 HB 30 - Tensile strength < 350 N/mm 22.00602.0070E - Cu 57SE - CuCommerially Pure2.00902.13562.1522SF - CuCu Mn 3Cu Si 2 MnC 10162 - Short chip copper alloys - Hardness < 200 HB 30 - Tensile strength < 700 N/mm 262.1 - Brass2.03602.03802.0410Cu Zn 40(MS 60)Cu Zn 39 Pb 2 (MS 58)Cu Zn 44 Pb 2CZ120, CZ109PB1042.05612.05802.0771Cu Zn 40 Al 1Cu Zn 40 Mn 1 PbCu Ni 7 Zn 39 Mn 5 Pb32.1030, 2.108062.2 - Bronzes2.10862.10932.1096G-Cu Sn 10 ZnG-Cu Sn 6 Zn NiG-Cu Sn 5 Zn Pbphone:+82-32-526-0909, fax:+82-32-526-4373, www.yg1.kr, E-mail:yg1@yg1.kr • 323