national machinery exchange, inc.

NATIONAL MACHINERY EXCHANGE, INC.ENCABEZADORAS DE FORJA EN FRIOHeaders, Cold• 1/16", National Hi-Speed, Dssd, Head 3/4" Lg, C.O. 1", 400 Ppm, 2, I-62172• 1/8", Waterbury-Farrel, 2-Die 4-Blow Transfer, 1.5 Hp 3/220 Or 44, I-56826• 1/8", National, '50,3/4" Under Hd; 250 Ppm; 1.25" Lg, Auto Lube. Ft Pe, I-51947• 1/8", Omega #0, Dssd, Dia 3.5 Mm=.137", Sh 25 Mm=1" Lg, Ppm 80-180, I-53789• 1/8" Waterbury-Farrel #0 Tub.Rivet, 2die 4blow, 1968, 5/8" Max Sh, I-62030• 1/8", Waterbury-Farrel, 2 Die 4 Blowmtransfer, 1.5 Hp 3/220 Or 440, I-56825• 1/8", Waterbury-Farrel, No. 0, 1" Max Shank Length, 1-1/2", 150 P, I-65151• 1/8", Waterbury-Farrel#0 Dssd, 2die 4bl, Max: Sh 5/8", Cutoff 1-1/4", I-103197• 1/8", Waterbury-Farrel D.S.S.D., Under Hd 1"Lg, Ppm 150, Power Fd Ro, I-57879• 3/16", National, No. 34, 1983, Dssd/Ls, 2" Max C/O Lg, 1-1/4" Max, I-106331• 3/16", National, No. 34, 1/4" Max Cutoff Dia, 2-1/4" Max Die Kick, I-107583• 3/16", National, Dssd, 1958, 1" Max Shnk Lg, 1-1/2" Max C/O Lg, 2, I-66162• 3/16", Nat'l, '60, Max Lgth: Sh 2.25", Co 3", Ppm 175-200, Ko Die, I-60394• 3/16", National, Dssd, 1" Max Shank Lg, 1-3/4" Max C/O Lg, 200 Pp, I-103874• 3/16", National, Max Lenght Under Head 1", Min Length Under Head, I-105632• 3/16", National, Dssd, 1-1/4" Max Shnk Lg, 2" Max C/O Lg, 350 Ppm, I-106292• 3/16", National, Hs/Dssd, 1-1/4" Shnk Lg, 2" C/O Lg, 350 Ppm, Ac, I-106293• 3/16", Waterbury-Farrel Hipro Cold Header, 1" Shank Lg., 225 Ppm, I-108583• 3/16", Waterbury Farrel, '55, 175 Ppm, 3-1/4" C.O.Length, Ac Motor, I-101111• 3/16" Waterbury-Farrel #10, Shank Lg. 1", Co Lg. 1-1/2", Ppm 200, I-107219• National, 5/16", Max Cutoff Length 2-3/4", 125 Ppm, Main Motor 22, I -55091• 1/8", Hartford #2-425, 1/8"C/O Dia, 1-7/8"C/O Lg, 1/8" Pko Str, 425 Pp, I-106188• National, No. 62, I-108065• Peltzer & Ehlers Cold Header, No. Gb30, 4 Dies, 450 Ton Press For, I-107844• Waterbury #5/16 Hipro, Max Shank Lg. 1-1/2", Max Lg C/O 2-5/8", Pp, I-107598• Waterbury-Farrel, Open Die Type, I-108340• Waterbury-Farrel, 3/16" Max. Co Dia., 2-1/2" Max Shnk Lg., 3-1/4", I-107588• Waterbury #5/16 Hipro, Max Shank Lg. 1-1/2", Max Lg C/O 2-5/8", PP, I-107598• Waterbury-Farrel, Open Die Type, I-108340• Waterbury-Farrel, 3/16" Max. Co Dia., 2-1/2" Max Shnk Lg., 3-1/4", I-107588ENCABEZADORAS DE MATRIZ PROGRESIVASHeaders, Progressive Die• National, No. Formax 55m, 5-Die, Medium Stroke Header, Spm 190 Si, I-108616• National, Max. Dia Lg. 1/2", Max Co Lg. 9-3/4", Max. Die Lg. 8", I-108507• National, No. 4l4, 4 Dies, Spd 300ppm, Max Dia Cutoff .270, Die K, I-108265• 1-1/4" National, 3-Die, Min-Max Co Lg. 2-1/2"-15", Ppm 38, Progre, I-108524ENDEREZADORAS DE ALAMBRESWire Machinery, Straighteners• 1/16"-3/16", Shuster #1a, 5 Die, 2 Racks, W/Motor & Controls, 2 H, I-105317• Lewis, No. 4f, Cap 3/32"-1/4", Feed 95-195 Fpm, C.O. 15', Pinch R, I-108178• 1/16"-1/4", Lewis #2cv,'77, 1/2"-3" Lg, 5-Die Rot Str, (2) Sets Pinch, I-103757• 36", Pas #Os-7486, 7 Rolls (3/4), 12 Ga Stl, W/Entry & Exit Pch Rolls, I-70087ENDEREZADORAS DE TUBO Y BARRAStraighteners, Tube & Bar• 2" Blaw-Knox Medart #0, 6-Rolls,Cap.- Tube-3/8" To 2", Bar- 3/8 To, I-64666• 2", Bigwood, No. 1b, 1954, Dia: 3/4" Min. Bar, 3" Max. Tube, 3/4", I-65294• 4", Sutton, No. 618, 1981, R-L, 80-250 Fpm, I-108560• 6" Medart #5, 1956, 1.5"-6" Ms Bar, 2-Speed #5 Gear Box, 200 Hp 2, I-102626• 18", Wyko #Ws12ps, '83, Dia Range: 450mm-160mm, Wall 25mm Thick, I-103745• Back Chun 6-Roll Tube Straightener, Tube Size: 1/2" - 2-1/2", 22', I-108335• Egan, No. S30-615, I-106228• 4-1/2" Kane & Roach, 5 Roll Rotary Straightener; No Of Driven Rol, I-104639• Medart No. 1 Bar & Tube Straightener, Bar Cap 1/2"-2-1/2", Passli, I-108590• Medart, No. 4, 2-Roll W/Pinion & Gear Reduction Unit, 5" Dia Cap, I-106256• Sutton #B-601-S-2m, '86, Dia .187"-.500", Roll Dia 2.250", Shaft .875, I-101653• Wyko Series Ws104, 10-Roll Rotary, Cap. 1/2"-2-1/2", Roll Size 5", I-108163• Blaw Knox Medart, No. 1, Two Roll Straightener, I-108633• Ruesch #207m, Fly Co Saw, Fd Section, Downcoiler, 20' Runout Tble, Ope, I-106575ENROLLADORASUpcoilers, Recoilers• Recoiler, 10000Lb X 36" B & K #10-R, 1961, 16" Dia Drum, Max Coil Od 60", I-101792• Recoiler, 20000Lb., Paxson, Hyd Manual Exp., Hold-Down Snubbing Roll, I-105795• Recoiler, 40000Lb., X 76", Wean, Hyd. Grip Off, Overarm Separator, Push, I-103545• Recoiler, Bliss, Rewind Unit, 16" Dia. X 28" Block Face, I-107689• Recoiler, 1-1/2" Dia Arbor,Block 8.5"Dia X 6-3/4" Face, Edge Gd, Tension C, I-104047• Upcoiler, 4" X 28", Torrington, Max. Coil Size 32" Dia.; Pass Line 40", I-104627• Upcoiler, 16" X 038", Waterbury-Farrel, 15 Hp 220/440 V 3 Phase, 60 Cycle, I-64883• Upcoiler, 28" Wide, W/20 Hp 3/230-460/60 (1745 Rpm) Motor, I-105577ENROSCADORASThread Rollers• 5/32" X 1-1/2", Waterbury-Farrel, #0, 1943, Ppm 145,175, Lift Bla, I-69037• 5/32", Waterbury-Farrel #0, Flat Die, 1-1/2" Thrd Lg, 1-5/8" Max Dep, I-106295• 3/16" X 1.5", Hartford #190-M, Ppm 32 - 175, 5 Hp 3/230-460/60, C, I-102493• 3/16", Wardsboro #Wb-250, 2mm-6mm Screw, 50mm Shank, 3/60/220-440, I-102077• Hartford #20-225, 1970, 1/4" Thru 1/2"Screw, 4"Max Shk Lg, 135-225 Pp, I-106160• 1/4" X 2", Warren #Wt-1000, Hs,1980, 1000 Ppm, Vib. Bowl, 7-1/2 Hp, I-105998• 1/4" X 2 5/8", Reed, No. A-23, 1956, 10 Hp, 220/440 Volt, 3/60 17, I-61702• 3/8", Waterbury-Farrel #20, Max. Thrd. 3", Max. Depth Dies 3-1/8", I-108326• Waterbury-Farrel #10 Thread Roller, Thr. Dia. 1/4", Thr. Lg. 2", I-108327• 3/8" X Warren #20, Screw Dia. Cap. #6 To 3/8", Blank Lg. Up To 6", I-106694106694 108414103757 103094• 5/32"-3/8", Lewis #8cv, Rack 6', 5-Die Rot Str, (3) Sets Pinch Ro, I-103094• .040-.160", Bundgens #Ud-3, Max Infeed Str 4", Co .20" Long, Fpm 1, I-102534• 3/16" - 3/8" Shuster #2abcs, Rack 10', I-106986• Lewis, No. 8f, Travel Cut, Cap 5/32" To 3/8" Lght 14'-6", I-108821• 3/8" Shuster #2ab, 1 Set Ea Entry/Exit Pinch Rolls, 5die 3roll Rot, I-100871ENDEREZADORAS DE LAMINAStraighteners, Sheet & Strip• .078" X 24", Littell, No. 424-Hvs-7pd, 3/4 Rolls, (2) Pinch Rolls, I-105866• .125" X 6.75" Egan#S-20-86,8rolls (4/4), 12-72 Fpm, Roll Dia 2-1/8", I-66044• .125" X 10", Rowe, No. R10-Tc, 7 Roll, 35 - 100 Fpm, I-64849• 4.25" X 52" Torrington #1010, 4/5 (Spec:Top 4 W/ 5/8" Grooves)Max, I-105160• Raster #18188, '82, 7" Wide X .030" Est., 9 Over 10 Rolls, Var Sp, I-103756• 36", Littell, No. 438-7pdl, Max. Cap. .050 Thickness; Dia Rolls 3, I-103091• 3-1/4"Dia X 50" Wide Rolls, Woehr "M", 5 Over 6, Working Ht: Flr T, I-103832• Littell, No. 212-17pd, 2" Dia Rolls, .090 Thk X 12" W Cap, Auto Lub, I-105969• 3/4" X Reed, No. 300a Thread Roller, 1997, 7.9mm-32mm Thread Dia, I-108414• 4" Tsugami #T-Rol, Infeed Roll Lg. 11-7/8", Spdl. 8-1/4", Hyd. Pu, I-108038• Hartford, No. 0-500, W/Vibe Hopper, Coolant Pump & Tank, I-108477• Hartford #000-1000, 1977,330-1000 Ppm,Bijur Auto Lube,Rotovane Ho, I-105781• Hartford #10-300, Thrd. Lg. 1/8" To 3", Blank Lg. Up To 4", I-107600• 5/16" Hartford #312m Horizontal Hand Feed Thread Roller, Thrd.Lg., I-108651• Landis Lanhyrol 2 Die Cylindrical Thread Roller, I-108687• Reed-Rico, No. A75n-Vb, Wire Dia. 1/4", Wide Die Cap. 3", 2000 Rp, I-108261• Saspi, No. Gu 3-20 Thread Roller, I-108330• Wardsboro #Wb-250, 2-6mm Screw, 50mm Lg Shank, 250-440 Ppm, 1015, I-104792• Warren, No. Wt-1000, I-108270• Kinefac #Mc-6-F, Solid/Tubular Shafts .472"-2.953", Vibr Bowl, 7.5, I-106895• Wardsboro #Wb-250, 2-6mm Screw, 50mm Lg Shank, 250-440 Ppm, 1015, I-104804• Saspi #Gv-1, 2.5-6mm Max Thrd Dia, 40mm Max Thrd Lg, 60mm Max Shn, I-107585• Waterbury-Farrel #10, 2" Max Thrd, Lg., 1/4" Thrd. Dia., 150 Ppm, I-107579• Reed-Rico #A75n-Vgb, Wire Dia. 1/4", Wide Die Cap. 3", 2000 Rpm, I-108258• Kayser Horizontal Thread Rollers Equip W/Hooks & Open Eyes, I-53902Para una lista completa de nuestro inventarioVisite WWW.NATIONALMACHY.COM 3

NATIONAL MACHINERY EXCHANGE, INC.• 36", Yoder, Consisting Of An: Uncoiler #10h, Slitter #3 & Recoile, I-68987• 42" X 6.5" Stamco,Id 23.5"-30",4 Cuts 3/16",20 Cuts 14 Ga,Tables, I-104574• 48" X 6" X 20000#, Paxson, L-R, Coil Id 16"-20", Mtrzd Coil Car, I-108206• 10" (270mm) Frohling, Coil Thick .05-.3mm, Coil Wd 250mm; Speed 10, I-107973• 31"(800mm) Redex #Slo Ii, High Carbon, Stainless Steel, Thin Gaug, I-107972• Slitting Line And Packaging Line, With Nrr Properties Llc Equipme, I-108748• 24" X 15,000# Rizzato Precision Loop Slitting Line, I-108626LINEAS DE CORTE TRANSVERSALCut-to-Length Lines• 6.7" X .014, Georg #Swa/M200-2 Auto. Small Core Winder, 1980, Stl, I-103023• 9.5" X .014", Georg #Swa/M200-2 Auto. Lg Core Winder, 1979, 5.1", I-103021• 9.5" X .014", Georg #Swa/M200-2 Auto. Lg Core Winder, 1980, 5.1", I-103022• Rbi 20.5" X .065 X 4000lb, Cc, Str, Feeder, 24" Max Length Feed, I-107028• 32" X .125", Hallden #541, Steel .090" Thk, 350 Fpm, 10 Lev Rolls,Ent, I-107982• 42" X .075", Dallas, 7000# Cap Payoff Reel, 7-Roll Flattener, Gripp, I- 66228• 48" X Dahlstrom Model #Mcl-20-15l Cut To Length Line, I-108722108722• 1500mm X 3mm X 20ton Atecnin Cut To Length Line, I-108735• 32" X .125", Hallden #541, Steel .090" Thk, 350 Fpm, 10 Lev Rolls, Ent, I-107982• 42" X .075", Dallas, 7000# Cap Payoff Reel, 7-Roll Flattener, Gripp, I- 66228• 48" X Dahlstrom Model #Mcl-20-15l Cut To Length Line, I-108722• 1500mm X 3mm X 20ton Atecnin Cut To Length Line, I-108735• Misc., Cut-To-Length Line, I-108339• Ogino Seiki (Japan) #Ae1-1350 Auto Foil Cutting Machine, 0.18"-0, I-107860• Ogino Seiki (Japan) #Ae1-1350 Auto Foil Cutting Machine, 0.18"-0, I-107861• Ogino Seiki (Japan) #Ae1-1350 Auto Foil Cutting Machine, 0.18"-0, I-107862MANDRILES DE EXPANSIONExpanders• 150 Ton, Arrowsmith, Ram Str 15" W/1" Reserve, Op Spd 1-2 Cyc/Min, I-65646• 314 Ton, Burr Oak, 1978, 9"W X 36"L Header, 36" Ram Str, 20" Cyc, I-61493• Grotnes #15-He-215-12, Nom Dia 16.00",Diametral Trav.1.47", Jaw H, I-102213MANIPULADORASManipulators• 5 Ton, Alliance, I-107810• 300 Ton, Mk35, I-107610• Mill Manipulator Type Welder, I-107171MAQUINARIA PARA TUBOTube Machinery• Bertolette #315, Tube Cap. 1/8" - 1-3/4" O.D. X .065" Wall, 1 Hp, I-105132• 1/8"-2", Modern #2k, 2 Spdle, Micrometer Adj Stock Lngth, 160 Fpm, F, I-105651• 2" Vulcan-Brehm #V200-14-Ac-55,'71, Tube Dia 3/8"-2", Max Tube Len, I-102631• 3"Pines #30 Dynacut, Min/Max 1/2"-3" Od,Wall Thk:.083"-.125",Max, I-104611• Everett, No. 20 Pda99-047, I-105047• Kusakabe, No. Nc-Spc-30c-45r, 1982, Single Cut, Tilts For Cutting, I-104178• Pines #45, Min/Max Tube Dia.20 1"Od Thru 4-1/2" Od, .200" Thick, 4, I-66705• Burr Oak #Dthf-M1-10,Cap: Max/Min Dia 1"-3/16", Feed/Str 3", 2-Tu, I-106487• 1/4"-3-1/2", Torr-Vaill#7s, Hyd Act Stp, Str 15"/6" W/Spacer, Spd 5, I-105645• 3" Fenn,Hydr, Model 30-3, 1981,30,000# Ram Pressure, Clamp Pressu, I-62562MAQUINAS DE ALIMENTACION Y ENDEREZADOFeeding & Straightening• 24" X 10000 Lb X .078" Auto Fd/Littell Servo Line, Str: 2/3, Spd, I-106919• 38" W. X Littell, No. 438-16, 1 Set Driven Pinch Rolls, Standard, I-65319• 1/2"Str, Dallas, No. Dwf-500, Entry R-L, 7 Roll 2 Plane Horiz/Vert, I-105862• Aeromatic, No. Model 3030 Dfh, 30" X 30" Cap., I-102192• Cooper, I-107226• Jaybird #J15-2412, Max:Stock W-24", Str.Lg-12", Stroke/Minute-60, I-106092• 020" X .105", Rowe, No. Ftcb-20, I-65188MAQUINAS PARA AGUZARPointers• Economy Double End Pointer, Part Dia 1-1/2", Tooling Dia 2-1/4", I-108571• Fastener Eng. Bhp500, 1/2 Hp 115 Volt 60 Cycle Motor, I-62643• Hartford, No.6-600, .020"Mindia, .375"Max Dia, 1/2"Minlg, 4"Maxlg, 200, I-105892• 3/8" - 1/16", Renco, Grove Size Max-Min 3/8"-1/16", Roll Dia-Face, I-108180• Robertson Hartford#2000, Bl:Dia .070"-5/16", Lg 3/16"-2", Ppm 325-7, I-101288MAQUINAS PARA CLAVOS Y PERNOSNail, Bolt Making Machines• Nail, Glader #Cr35, 8 Ga, 450 PPM, I-108177• Nail, #N5 Wafios, Dia: 2.2 Mm-3.8 Mm, Length: 13mm-104 Mm, 430 Nai , I-106393• Nail, No. N5, Wafios, 2.2-3.8 Mm Wire Dia., 13-104mm Nail Lg., 430 Npm, I-108256• Nail, No. N5, Wafios, 2.2-3.8mm Wire Dia., 13-104mm Nail Lg., 430 Npm, I-108257• Nail, Wafios #S.110 "Roofing Nail" Type Nail Production Machine, 40-110, I-108737• Bolt, 1/2", National, 4-Die, PPM 70, Max Blnk Lg 6-1/2", Min Blank Lg., I-108219• Bolt, National, No. S2, Max. Co Dia 19/32", Min-Max Shank Lg. 1"-5", 85, I-108508• Bolt, 1", National 4-Die Boltmaker, Shank Lg. 9", Thrd. Lg. 5", 40 Ppm, I-108717MAQUINAS PARA RESORTESWire Machinery, Spring Coilers• Atlas Wire Ring Coiler, 1/2 Hp, 220/240/380/420v, I-104141• Samuels "O", I-103328• #W-12, Torrington, Wire To .148", Coil Od 1/4" - 2-3/4", 5 Hp Ac*, I-58524• No. #W20, Torrington, Wire Dia. .008"-.028", Wire Length Per Spri, I-64914• No. 0, Bowden, Spring-O-Matic, 190-1900 Rpm, 1/2 Hp 3/60/230-460, I-65381• No. 0, Sleeper & Hartley, Segment Type, I-102942• No. 1, Sleeper & Hartley Series #731, Wire .010"-.072", 4" Max Spd, I-103826• No. Sc-8, Mec Wire Spring Maker, With Motor, Controls & Variable, I-108358108358 108385• No. 3015, Torrington Wire Spring Maker, Wire Dia Min-Max .072", I-108385• No. 1 Popcorn Samuel .015.062 Wire Range, Coil Range 3/32 To 1", I-107191• No. 10a, Torrington, I-61840• No. 14ct, National, 30-100 Ppm (4 Steps), Wire Dia. .008"-.055", I-65136• No. 2, Sleeper & Hartley, Series #732, Wire .035"-.148", 8" Max S, I-103827• No. 2-732, Sleeper&Hartley, I-102826• No. 1 1/4 Samuel Popcorn, .015-.062 Wire Range, Coil Range 3/32 To, I-107193• Sleeper & Hartley #666-1, Min-Max Dia. .018"-.080", I-107206• #Fm-8, Wafios, Wire Range .008"-.032", 3' Max Wire Length/Spring, I-I-64634• No. Series 7900, Sleeper & Hartley Wire Spring Coiler, With Motor, I-108362• Torrington #W-10, Min-Max Dia. .008"-.028", I-107207• No. W-100, Torrington, Wire Dia. Range .003"-.015", Coil Od Range, I-64892• No. W-20, Torrington, 1954, Wire Dia. .008"-.028", Coil Range Od, I-63595• #W-21 Torrington, '47, Wire Dia .015"-.072", Coil Range Id 3/32" To, I-66046• No. W225, Torrington, '48, Dia .080"-.207", Lgth Spr 2.9"-770", 5&7-Ro, I-63712NIVELADORAS DE PRESIONLevelers, Tension• 60" X .091", 1971, Tension Leveler, I-108212• 16" X .090" United Roll Leveler, 13 Roll, Roll Size 1-5/8"Dia. X, I-108612• Poongsan Level Wind Line, Min-Max Tube Od 6mm-22.2mm, Coil Ht 250, I-108654PERFILADORAS PARA LAMINASRoll Formers• 5 Stnd, Outboard Type, 9"Hc,4.75"-6.5"Vc, Tool Arbor: 1-5/8"Dia, I-105284• 6 Stnd, Artos,Gutter Typr 4k Box,6 Roll Stands, Chain Drive, 10 E, I-101556• 8 Stnd, Rafter, 1.5" Arbor Dia, 14" Horz C-C, 4.25"-7.5" Vert C-C, 14, I-104857• 10 Stnd, Dahlstrom Proma 10 Station Roll Former, Cap. .060", 90 F, I-108743• 10 Stnd, Portable Lockformer, W/Ac Motor & Controls, I-100859• 6 Stand, Maplewoow, Outboard, 1" Arbor, 1-3/4" Rs, 4.5" Horiz C-C; 2.5, I-105283Nuestro inventario cambia diariamenteVisite nuestro website: WWW.NATIONALMACHY.COM5

NATIONAL MACHINERY EXCHANGE, INC.• 60 Ton, Niagara #Af-4s,1963, 60 Ton, 6" Str., 16" Sh, Bed 34" X 33", 90s, I-102047• 60 Ton, Niagara #Es60, 6" Str, 18" Sh, 90 spm, Bed 32" X 21", Ram 21" X, I-103243• 60 Ton, Niagara #Es60, 6" Str, 18" Sh, 90 spm, Bed 32" X 21", Ram 21" X, I-103244• 60 Ton, V&O #60s-2, '66, Str 6", Sh 16", Bd 32" X 37", Spm 40-80, A, I-103225• 60 Ton, Havir, Bed 28.5" X 22.5"; Ram 16" X 11", 10.75" Sfo, 28.5" Wbu, Trf, I-105048• Bliss Model #4a Toggle Press, I-108569• Bliss Model #3-1/2b Toggle Press, I-108570• Bliss Model #3-3/4b Toggle Press, I-108568PRENSAS DE TRANSFERENCIA PARA ESTAMPADOPresses, Eyelet & Transfer• Iwk Type Pst 100/8 Transfer Press, Drawing Depth 3-15/16", Spm 34, I-108497• Waterbury-Farrel No.108 Transfer Press, Plungers 8, Dia Feed Roll, I-108494• 15 Ton, Baird #2-19, Spd 92-276 Spm, Stations 7, Dbs 2-1/2", Meta, I-108032105048 106480• 35 Ton, Bliss, St 4", Adj 2.5", Thr 9", Sh. 10.5", Bd 26.5" X 17", V, I-106480• 75 Ton, Clearing, 5" Str, 18-1/4" Sh, 40 Spm, Bed 36" X 25", Good Press, I-102014• 75 Ton, Niagara M-75, Str.4", Sh 15.75", 3-3/8" Adj, Bed 36" X 24", Ram, I-101957• 90 Ton, V & O, I-100839• 100 Tons, Warco, Sh 24".Str 8", Thr 15.25", Bed 38-1/16" X 23.75", Wbu, I-104304• 110 Ton, Clearing #110, 6" Str, 20" Sh, 16" Thr, Bed 42" X 28", Ram 28", I-58594• 110 Ton, Gmc Clearing, 1991, 8" Str, 22" Sh, 50 Spm, 4" Adj, Bed 39", I-103437• 113 Ton, Bliss, I-102323• 150 Ton, Niagara #Af6-1/2, St 8", Sh 20.5", Bd 50" X 30", Air Cl,Bols, I-101883• 200 Ton, Clearing, 10" Str, 24" Sh, 5" Adj, 35spm, I-105565• 56 Ton, Bliss #21-1/2, 3-1/2" Str, 13-1/4" Sh, Bed 22" X 32", I-103742PRENSAS DE RESPALDO ABIERTO VOLANTEPresses, O.B.I., Flywheel, Sin• 20 Ton, Press-Rite #P2-3 (Punch), I-103401• 32 Ton, Niagara #A3-1/2, Ram 3-3/4", Bed 27" X 17-3/4", Ram 8-1/4" X 12-3, I-105684• 35 Ton, Bliss#C-35, '62, St 3", Sh10.75", Adj 2.5", Bd 26.5 x 17.5, Ram 1, I-104860• 35 Ton, V & O #35st, Obi/Sc, 2" Str, Bed 16" X 29", Thr. 8-1/2", Sh, I-104348• 40 Tons, Rockford#40w, St 3", Sh 10.75", Adj 3", Bd 26" X 14", Bols 2.25, I-104613• 45 Ton, Bliss #21-S, '57, Str 8", Sh 16", Adj 2.5", Bd 29.5 x 19.5, Ram13, I-104859• 56 Tons, Minster #6, St 5", Sh 8.75", Adj 3", Air Cl-Cush, Bd 32" X 21", I-104599• 60 Ton, Clearing "Torc-Pac", 6" Str, 18" Sh, 3" Adj, 90 Spm, Bed 32", I-103999• 110 Ton, Bliss #C-110, '68, St 6", Sh 21", Adj 4", 40 Spm, Wbu 24", I-107919107919 106253• 15 Ton, V & O #15, 3" Str, 2" Adj, 8-1/4" Sh, 4" Thr, 9-1/2" Wbu, 12, I-106253• 60 Ton, Clearing #60t,'55, Spm 90, Str 4", Adj 3", Sh 13.5", Bols 3", I-102586• 60 Ton, Niagara, 1958, /Str 5"; Sh 16"; Spm 90, I-103001• 60 Ton, Niagara #Aa4, 5"Str, 1956, Bed 32"X21", 16-3/4"Sh, 75 Spm, I-103118• 60 Ton, Niagara #Af4s, '61, 6" Str, 3" Adj, 34" X 33-1/2" Bed, 21, I-103121• 75 Ton, Minster #7f, 3-1/2" Blstr, 4" Str, 15" Sh, 36" X 24 bed, 90 spm, 7-1/2, I-105809• 75 Ton, Niagara #Es75, 8" Str, 21" Sh, 90 Spm, 3" Adj, Bed 36" X 24", I-103447• 150 Ton, Minster Gi-150, I-103219• 45 Ton, Minster, Str. 2", Thr. 7-1/2", Wbu 13-1/2", Bed 28" L-R X 1, I-108024PRENSAS DE ROTULAPresses, Toggle• 50/26 Ton, Bliss #5a,'63, Str Pl 5"/Bl 1-1/4", Sbg, Da Cam, 15 Hp, I-57182• 52/35 Ton, Bliss #1-1/2b, Str 8", Bed 20-1/4" X 21-1/4", Ram 15" X 1, I-102098• 90/60 Ton, Warco #150-D1-28, Str: Bl/Pl 10/16", Adj 4", Sh: Bl/Pl, I-101582• 90/122, Bliss #3-1/2c,Bh/Pl: St 11.5"/20"; 26"6 wbu, Bd 25" X 28", Ram 2, I-105310• 120/80 Tons, Bliss #3-1/2c, St 20/11.5", Sh 26/24", Bd 26.5" X 28", Air, I-105299• 122 Ton, Bliss #3-1/2c, Str: Pl 20", Bl 22.5"; Shut: Pl 26", Bl 24"; Bol, I-104775• 145/98 Ton, Bliss #3-3/4b,'48, Pl/Bl: Str 22"/15", Sh 30"/28", 13 Sp, I-56233• 150/110 Ton, Bliss #3-3/4b, 1950, Pl/Bl: Str 22"/15", Sh 30"/28", I-66213• 230/155 Ton, Bliss #5-S, '51, 30"/14" Str, 35" Sh, 8" Adj, Bed 41, I-105127• 3-1/2b, Bliss, Bed 25" X 28", Air Cl, 15hp, I-107026• 70 Ton, Bliss #3-1/2a, Str 3", Slide Adj 4", Sh 16", Bed 25" X 29", Ra, I-57431108032 105880• 225 Ton, Bliss#6k, 1.75" St, 15.25" Sh,.400" Md Adj, 18.5" X 9.5" Bd,16" X 6, I-105880• Waterbury-Farrel No.1510 Eyelet Press, Cam Roller Type,Sta. 10, B, I-108496• Waterbury-Farrel #58 Cam Eyelet Press, Plunger 8, Feed Rolls 1.75, I-108493• No. 1212,Waterbury-Farrel,12 Sta.,Icop,W/Oil Recirculation Pump,P, I-105548• #1010 Waterbury-Farrel, Max Str 2-1/8", Max.Blk Dia 1.5", Ac Moto, I-100718• Waterbury Farrelno. 1510, 10 Stations, 2-3/8" Blank Dia, Cam Bump,I-100692• No. 1010, Waterbury-Farrel, 10 Sta., Cam Oper., Max Blank Dia. 1-, I-62310• Waterbury-Farrel #1012 Transfer Press, Cam Str 2-3/8", Blnk Dia 1-1, I-105549• Waterbury-Farrel#5-1/2-R-11, 11 Sta, 4.25" C-C, 8"-14" Str, Die D, I-65447• No. 57, Waterbury-Farrel, Cam Bumper Type, 6 Sta, 1" Blk Dia, 2-1, I-60094• Waterbury-Farrel #128 (#15) I.C.O.P. Auto. Transfer Plunger Press, I-108495• 15 Ton, Baird #2-19, Max Wd Metal 3-1/4", Max Lg Feed 2-3/4", 92-, I-108033• 315 Ton, Iwk#315/14/250/250, 14 Sta, Max: Bl Size 200mm Dia, Dr Dep, I-60358• Berman (W-F Copy) I.C.O.P. Auto. Plunger, I-104011• Waterbury-Farrel #2010 Icop Auto, Plunger, 6" Coil Fd, Max Draw D, I-104009• Waterbury-Farrel #1210 Icop Auto, Plunger 4" Coil Feed, Tool Cent, I-104017• Waterbury-Farrel #128 4" Coil Feed, Tool Center Dist., I-104024PRENSAS DE UNION DE CHARNELAPresses, Knuckle Joint• 75 Ton, Bliss #4, 1-1/2" Str, 1/4" Adj, 11" Sh, Bed 16" X 16"; Ram, I-63639• 100 Ton, Minster #90-100, St 3.5", Bd 24" X 22", Ram 20" X1 0", Sh 10", A, I-105980• 180 Ton, Cincinnati H.M.E, 1970, 2" Str, 65 Spm, 10" Spm, Bed 14", I-64918• 200 Ton, Bliss#6-K, 1.75" Str, 15.25" Sh, .400" Md Adj, 18.5" X 9.5" Bd, 16", I-105872• 400 Ton, Bliss #Kj-400-20-20 Knuckle Join Press, Str. 4", Sh 15", I-108804• 400 Ton, Minster #90-400 Knuckle Joint Press, Str. 4", Sh 23", I-108805• 400 Ton, Minster #90-400 Knuckle Joint Press, Str. 4", Sh 23", Be, I-108806• 800 Ton, Bliss-Toledo #665, St 5", Sh Sdau 16", Bd 28" X 36", Air Cl, Sbg, I-102622• 1000 Ton Bliss-Toledo #666 Press, 37" X 31" Bed, Str. 5", Sh 18", I-108515• 1200 Ton Bliss #28 Press, 47" X 37" Bed, Str. 6", Sh 32-1/4", Spm, I-108513• 150 Ton, Bliss #22, 2" Str, 1.5" Ram Adj, 11" Sh Over 16" X 16" Bed, 90 spm, I-105956• 4000 Ton, Bliss #33, 12-1/2" Str., Adj. 1" By Pwr, 40" Die Sp, 12 S, I-106633PRENSAS HIDRAULICASPresses, Hydraulic• 2 Ton, Denison #Wua-2tr, 3" St, 10-9/32" Dl, 4.5" Thr, Bd 11-1/8" X 9", I-105435• 2 Ton, Denison #Wua-2tr, 3"Str, 10-9/323"Dl, 4-1/2"Thr, Bed 11-1/2, I-105436• 4 Ton, Denison, I-103317• 6 Ton, Denison #Dg6003017a59, 6" Str, 6-1/4" Thr, 3-1/4" Piston, 2", I-104525• Cincinnati #175 Obs, 175 Ton, 95" W, 100" D, 153" H, I-107872107872 107023• 75 Ton, Greenerd, 24" Str, 1973, Thr 13", Bed 28" Lr x 19 fb, Ram 19-1, I-107023• 20 Ton, Cole, 1986, Bed 29" X 18", I-108426No encuentra lo que busca, contáctenos aSALES@NATIONALMACHY.COM 7

NATIONAL MACHINERY EXCHANGE, INC.BANCOS DE ESTIRADO DE ALAMBRESWire Machinery, Drawers• 1/2" Vaughn, # 4hrx, Finish Block Dia. 30"/36", Drawing Spd 666/16, I-108251• No. 18wr-21, Morgan Henrich, (4) 9-Step Drawing Cones Powered By, I-64025• Rockford #34-25/3-50-21, 3/16" Cap, 16" Block Dia, 15 Hp Motor, I-106484• Rmg #45-0574-01, Wire Drawer, Dia. 20", Max Wire Dia. Alloy .250", I-108393• No. 910-40127-73, Rmg Wire Drawer, I-108810• No. A16-Sy392, Syncro, Max Wire.05082"(#16 B&S), Fin.01003"(#30)-.00, I-101538• S.A.M.P. Ms.120 Cont. Wire Drawg-Annealing & Spooling, 21-Die, Ma, I-103944• No. Skp22, Tecnoimpianti, 1987, I-107785• Herborn, 19 Die, 4 Cone Blck, 17% Draft, 8-1/2" Traverse, .009" C, I- 105322• Fastener Engineer #Wr-01-16 Wire Drawer, 3" Face, Spd 6-55 Fpm, I-108353BLOQUES DE ESTIRADO PARA ALAMBRESWire Machinery, Bullblocks• Fenn, #3-U, Univ. Type Tandem Turks Head & Bull Block Drawing Line, I-58617• Vaughn #19-Sd, Max Start Appx 1" Dia Low Carb Steel, 22" Dia Sing, I-104624• No. 22sd, Vaughn Bullblock, I-108732• Wirematic, 30" Dia Block-Vert., Equipped W/75 Hp 3/60/220-440 Mot, I-68950• No. 5sdbb2250, Macbee, 5hp D, Sabina Controls, Die Pull 1100 Lb, I-108175• No. Dt-05-24, Fastener Eng., 5hp, 230/460v, 3hp, 60 Cyc, 1160rpm, 107086• No. Pjh1520-850-36, Fastener Eng.,15hp, 230v, 3ph, 60 Cyc, 1740 R, 107071• No. 84, Marshall Richard, I-107764CIZALLAS DE ANGULO Y BARRAShears, Angle & Bar• 5" X 5" X 1/2", Whitney #765, 4-Post, Flat Stock Dc Max.12 x 3/4", Sc M, I-61420• 4-1/2" Wean-United #5, 75hp Mtr,60' Pwr Feed, 30' Air Oper. Gauge, I-106258• Fabriline #1010e, Triple Ton 63, 129, 192, 5-1/4"Str, 16-3/4"Sh, I-65397CIZALLAS DE ESQUADRARShears, Power Squaring• 12 Ga. X 4' Cincinnati Squaring Shear, No. 1004-Ra, 58" Sq. Arm, I-108533• 16 Ga. X 48", Niagara #148cd, 18" Back Gauge, 2-26" Ext Arms, 36", I-107993• Niagara, 60", 16" Gauge, Max. Feed Wd 50", Max Feed Lg. 38", I-107913• 10 Ga. X 120", Wysong #1010hd, 14 Ga Ss Cap, 16 Holddowns, Ft Tre, I-108184108184 108210• Quickwork-Whiting #40a, 1/2" Ms Max, 48" Thr, Cut Spd 5-10 Fpm, 3-Spd, I-101789• Pullmax, No. X8-30, Shear/Circle Forming, W/Ac 3/220-440/60 Motor, I-58713• 1/2" X 48" Beatty-Quickwork #40a, '68, Std Cut Spd: Min 5', Max 10', I-58751• Marshalltown #10m, 5"Dia, 1 Hp 3/60/208v Motor; Mech. Hand Brake, I-66429• 3/8" Blue Valley #60, 10 Hp Motor With Controls, I-108069CORTADORAS DE TUBO, CAÑERIA Y BARRACut-Offs, Pipe, Tube & Bar• 5/8", Custom, Saw Blade 8" Od Max, Cap 4" Wide Max, Pushbutton Co, I-66740• 7/8", Farris, 1974, Rotary, 2-Pln Str, Catipillar Cog Belt Grip F, I-103485• Landis, W/Air Activated Pushup, 3 Hp 3/220-440/60 Motor, I-59672• 25 Ton, Yoder #P25, 150fpm, 100spm, Cutting Str (Std) 2-1/4", Flyin, I-105271• Landis, Bottom Rolls Hand Adj., 3 Hp 3/60/220-440 Volt 1725 Rpm M, I-51587• 1-1/2" X 4" Yoder, 1990, Wall Thickness .300", Max. Travel 24', I-108408CORTADORAS LONGITUDINALESSlitters• 32", Waterbury-Farrel, No. #2, 15 Hp 220/440 Volt Motor, I-57795• 100", Weybridge, Slitter, I-56338• Slitter, 10-1/2" Max. Coil Wd, 2.875"Arbors, Coil Reel, I-106772• Yoder Slitter, I-108802• Waterbury-Farrel, 2-3/8" Arbor Dia X 13" Face, Entry Edge Guides, T, I-101175• 24", Ruesch Arbor-Loop Slitter, I-108787DOBLADORAS PARA BARRA O TUBOBenders, Pipe, Tube & Bar• 3/4", Pines, Max.Radius 10", Max. Bending Angle 180 Deg.+ Overhead, I-101725• 1 1/2", Pines, No.5t, Dial-A-Bend, 1" Tooling, 20 Hp, 230/460 V, I-101901• Pines, No. 5t, I-107921DOBLADORA DE ALAMBRESWire Machinery, Benders• Hufford, Vari Speed And Force, 48-3/4" Dia Pin Holes, Table Size, I-69423• Lubow, 4 Headed Bender, Adj Bend Heads, I-108819• Lubow, Ring Roller, Cap 3/8" Dia Wire, Spd 75 Cuts/Min, I-108822• Lubow, Air Bender, 2 Stop Rotary, Tbl Sz 24"X72", I-108818• Lubow #Wbr-2, Wire Angle Bender, I-108833• Wafios #Vdub-20, Wire 50 Ton/Sq In .0590"-.1772",90 Tons/Sq In .05, I-53890DOBLADORAS DE LAMINASBrakes, Press• 16 Ga. X 8', Apron Brake, I-108173• 4' X 16 Ga., Dreis & Krump, No. 416, I-106896• 14gax6', Niagara #Ib-25-6-6,1973, 5' Dbh, 7.5" Thr, Spm 20-50, 1-1/2, I-58344• 16 Ga. X 35 Ton, Dreis & Krump, No. 338, Bed 8, Runs Good, "Older, I-63284• 10 Ga. X 12", Chicago, No. 810l, 60 Tons, Mtrzd Ram Adj, Mech. Cl, I-107150• 3/16" X 4'l, Lodge & Shipley #0304-Sl, Thr. 18-1/2", Dbh 4'4", Sp, I-108210• Niagara, No. L10, I-108172• 3/16" X 10', Lodge & Shipley #S-0310-Ab, Thr. 18-1/2", Dbh 10'4", I-108211• 1/4" X 10', Cincinnati #2cc10, Bed 10'7"L, Thr. 3-3/4", Wbh 10'3", I-107690• 3/8" X 12', Lodge & Shipley #0612sl, Bet Hous 13'4", Thr 18", (2) 9', I-106648• 3/8" X 16', Niagara #1016, 45spm, 20 Holddowns, Rake 5/16 I.P.F., I-102503• 1/2" X 12', Niagara #1012 Power Squaring Shear, Cap S.S. 3/8", 25, I-108552• 1/2"X120", Betenbender, #10-1/2, 1988, Back Gauge 36", 8 Spm, 20h, I-107906• .135" X 10', Accurshear, #813510 Power Squaring Shear, Voltage 3 Ph, I-108733• Stamco, No. 3049, Cap. 4' X 3/16" Mild Steel, Blade Lg. 4'6", Air, I-107437• 3/8" X 6', Pacific #375s6arl, Power Back Guage, Ball Table, 18" T, I-104035• 3/8" X 8 ', Pacific, #375s8, 1959, 8' Mild Steel, 9 Holddowns, Wb, I-102335• 3/4" X 10', Pacific #750hd10 Hydraulic, Sq. Arm, I-100055• 10' X 3/16" Amada #M-3045, Power Squaring Shear, 0.177" Mild Steel, I-108653CIZALLAS ROTATORIASShears, Rotary• 10 Ga. Niagara, No. 31rc,Circle: Min/Max- Sq. Dia. 6-60; Oct. 6-7, I-105755• Niagara, Max Cap. 16 Gauge, Thr. Shear 9-1/2", Thr. Clamp 34-1/2", I-107914• Kling #250, 1/4" Max Cap, Flanges 3/16" Thk 1/4" Depth, 36"Thr, 8 , I-105877• 3/8" Cap., Quickwork #34-A, 40" Throat. 2 Hp Ac 3/220/440v, 1951, I-101709• 3/16" Cap., Whiting-Quickwork., No. 23-A, Dia: Min. 8"/72" Max., 45, I-53190• Kling #250, Shear Sq. 1/4", Flang. Thick 3/16", Dep. 1-1/4", Long, I-106965• Pullmax, No. X8-30, Shear/Circle Forming, W/Ac 3/220-440/60 Motor, I-58713• 1/2"X 48" Beatty-Quickwork #40a,'68, Std Cut Spd: Min 5', Max 10', I-587512107150 108542• 150 Ton, Chicago, No. 1012-R, Cap. 12' X 3/16", 3" Str., 5" Ram A, I-108542• Richards Bbc, 25 Ton, Str. 4", Sh Btwn Heads 6" To 8", Cap. 8" X 3/8", I-102203• 50 Ton, Chicago #810c, I-107151• 60 Ton, Niagara #Ib-60-8-10, '71, Str.3", Shut.12", Adj.5", Dist. Bet Ho, I-101462• 75 Ton, Dreis & Krump #68c, 8'x10 ga, 8'oa, 6'6" Bh, 5hp, 1967, Ins, I-102492• 100 Ton, Niagara #Ib-60-6-8, 78" Dbh, 8" Thr, 3" Str, 5" Ram,12" Ds, 40spm, I-103057• 60 Ton, Niagara #Ib-60-6-8, 78" Dbh, 8" Thr, 3" Str, 5" Ram, 12" Ds, 40spm, 7, I-103058• 225 Ton, Cincinnati Series9, 3" Str, 5" Pwr, 8" Thr, 10'6" Dbh, 12" Ds, Auto C, I-105979• Cincinnati #9x10, Cap Tons: Mid 150, Bot 225; Mech Cl, 14' Bed/Ram, Md, I-105149• 260 Ton, Niagara # N-260-8-12, 4" Str, 6" Max Adj, 12" Depth Of T, I-102023• 3' D & K Model #135 Mechanical Press Brake, I-108726• 135 Ton, Cincinnati 5, I-108690• 90 Ton, Chicago 1012-L, Mechanical Press Brake, 12' Lg. Of Bed Ra, I-108501• 75 Ton X 8', Promecam #Rg-75-25, Hyd, 99" Bed/Ram, 85" Bet Hsgs, 16" Gap, I-100030• 110 Ton X 8', Amada, No. Rg-100s, 1980, Drc Sgl Axis Gaging Syste, I-106014Visite nuestras oficinas y almacenespara inspeccionar maquinaria de calidad

NATIONAL MACHINERY EXCHANGE, INC.FORMADORAS DE TUERCASNut Formers• 3/16", Waterbury-Farrel #256 5-Die Hipro, 1971, .437" Max Die Ko, .3, I-105999• 1/4" National, Max. Kick 3/4", Max. Blank Lg. 9/16". Nut Ht. 3/8", I-107992• 3/8", Natl 5-Die, '50, Bl 11/16"Lg, Ko 3/4", Across Flats 11/16", PP, I-55064• Nutap #Sp-1, Chamfering, 3/8", '54, 125 Ppm, 2 Hp Motor, I-53786• 1/2", National Cold Nut Former, I-108796• National #124, Ppm 250, Min-Max Lg. Blank 7mm-17mm, Max Kick 19mm (3Available), I-107642• National #164, Ppm 200, Min-Max Lg. Blank 9mm-19mm, Max Kick 25mm, I-107643• National #84, Nut Ht 11.5mm, Blank Lg. Max-Min 14mm-6mm, Dia Co 1, I-107639• 5/8", National S-2 Cold Nut Former, Complete Refurbish 2006, I-108541FORMADORAS DE ALAMBRESWire Machinery, Forming• No. 00, Baird, 1/2 Hp With Varidrive, Controls (On/Off), I-101439• No. 00, Nilson, Wire Dia 1/32", Max Lg. Feed 3", 7-Roll, 2 Plane, I-108364• No. Mcs-8d, Itaya Spring Wire Former, Max Wire Dia 0.8mm, Coil Ou, I-108355108355 108000• No. S-5, Nilson, Wire Dia. 3/8", Wd Strip 2-3/8", I-108000• Baird, #1 Automatic Four Slide Machine, Max Dia. Soft Steel Wire, I-104123• No. 1, Nilson, Wire Dia. 3/32", Max Lg. Feed 8", I-108372• #1, Us Baird 4-Slide, Max Dia Mild Steel Wire 3/32", W Ribbon Mat, I-108130• 1 Rwi, U.S. Baird, 3/32" Cap. Ms, Feed Lg 8-1/2" Max, 2 Pln Strip, I-103838• Us Tool #11, Fd Lg 3", Max Stock 3/4" Wide, Stock 1/32" Thick, I-108137• 3/32" U.S. Baird #33, 2.5" Max Stk W, Sym, 1 Ph.Split Hd Cams, Flat St, I-106181• No. 00, Us Baird, 4-Slide, I-108140• No. 35, Us Baird, I-107837• No. 5, Baird, Max. Dia. 5/16", Max. Feed 15", Width Ribbon 1-3/8", I-108325• Nilson #700-L, 4-Slide, Wire Cap. 3/32", Double Gibbing, W/Shell, I-108166• No. 752, Us Baird/Nilson, 1/8"Cap, 1996, I-107836• 3/32" Us Baird #Rw1, 4-Slide, Spm 75-300, Max. Wd Strip Material, I-108134• 1/32" Nilson #S-00, Motor W/Controls, I-106933• No. S-1, Nilson, Wire Dia 3/32", Max W Strip Metal 1", Feed Lg. 8, I-108373• No. S-1-F, Nilson, Wire Cap. 3/32", Max W 1-1/4", Max Lg Of Feed, I-108365• No. S-1-F, Nilson, Wire Cap. 3/32", Max W 1-1/4", Max Lg Of Feed, I-108366• No. S-2, Nilson, 1/8"Cap, Four Slide Wire Machine, I-108287• No. S-2-F, Nilson, 4-Slide, 1/8" Cap, W Of Stock 1-1/2", Lg. Of Fe, I-108264• #S-3 Nilson, Wire Dia 3/16", Fd 15" Lg, Solid Cams, Remov Hearts, Lift, I-104506• No. S-4, Nilson, Wire Dia. 1/4", Strip W 1-7/8", Feed Lg. 17", Be, I-108191• No. S-432, Nilson, I-108190• No. S3, Nilson, Max. Dia 3/16", Max Feed Lg 15", Bed 8" X 6-1/2", I-106860• Type Sd600, Emil Jager Kg,'79, (32) 1-1/2" Wide Fd Sections, 64", I-108185HORNOSFurnaces• Lee Wilson, Gas Fired, 1 Furnace, 3 Bases, Max Coil Od 66", I-108461• Lee Wilson, Gas Fired, 2 Furnaces, 4 Bases, I-108462• Higassa, Bell Type, I-108055• Electra Products, Max. Temp 1200 F, I-107915• Surface Combustion - Force Aire, No. Hfc-36-54, 1650 Deg. F, Air, I-102294• Surface Combustion - Force Aire, No. Hfc-36-54, 1650 Deg. F, Air, I-102295• Surface Combustion - Force Aire, No. Hfc-36-54, 1650 Deg. F, Air, I-102296• Surface Combustion - Force Aire, No. Hfc-36-54, 1650 Deg. F, Air, I-102297• Ajax, No. Single, I-107103• Large Continuos Coil Heating Furnace, I-108153• Sms/Demag Electric Arc Furnace Continuous Casting Line, 1989, 75t, I-108225LAMINADORESRolling Mills• 8-1/2" Waterbury-Farrel (Sendzimir) #Pl-16 Planetary Hot Mill, Hea, I-102058• Waterbury-Farrel #Zr-16-8 1/2, Start Size .080", Finish .020", I-108149• Fenn, 18 Inch Sendzimir Reversing Cold Strip Rolling Mill, I-108831• Sendzimir, No. Zr 34-10 Mill, I-108824• Waterbury Farrel #Zr15-8-1/2, Cap Thick: .060", Start .001" Finis, I-104638• 19" (480mm), Waterbury-Farrel #Zr23-19, Sendzimir Reversing Mill, I-108786• 5-1/4" X 8", I2s, '92, Auto Ga Ctrl-Hyd Screwdowns-Auto Camber Ctrl, I-103685103685 108460• Waterbury Farrel, Zr33-13 Max Strip W 14.250", Roll Spd 350/500, I-108460• 3-3/4" X 3" Ruesch #154, Passline Hg.45", Journal Dia.2-1/4", Spd.40, I-106485• Boniardi-Gioci, No. 100/55, I-108058• Torrington #1781 Wire Flattening Line, 3 Roll Dia, Roll Size 10", I-108285• Yoshida Kinen #14-Bm,Press 15-20%,Roll: 1.9685" Dia X 1.578" W, Shft, I-103936• Sundwig, No. Wv 20 R-100, 1957, 20-Roll, Work Rolls Dia. 10mm To, I-64480• 6" X 6", Fenn #61, 1967, W/Roller Bearings, 50 Hp, 3/60/440 (1755), I-58297• 6-1/4"Dia.X8"Face, Buhler #Ew200x150, Rolls:150mm X 200mm, Vollmer, I-105046• 6.5 " X 1, 5" Schmitz 2 Hi Top\6. 5" X 3.25" Face, Manual Roll Ad, I-105155• 8-1/2" X 5" Broden, 2-Hi, Thick Frame 5", Dual Handwheel Manual S, I-107383• 10" X 16" Schmitz Type #Ea-250/400, 2-Hi,/W/Control Ppanel, 37/50, I-103393• 02" X 22", Bliss, Entry Ga .025"Min/.220"Max, Spd 700 fpm, Mill Mtr, I-106374• 20" X 60" Rolling Mill, W/Motor And Controls, I-107912• Yoshida Kinen#101-Fm,Press 15-20%,Roll: 1.9685"Dia X 1.578"W,Shft, I-103935• 21 1/2" X 28", Bliss, I-108107• 22" X 23 1/2", Nippon, 1979, I-108103• 1 1/2" X 8" X 6", Waterbury-Farrel, Work Rolls Dia 1-1/2", Face W, I-108150• M & N, 2-1/2" X 8" X 8" Rolls, Pwr Screw Downs, W/Annealing Oven #210, I-100178• 4" X 14" X 10", Morgan 4-Hi Rolling Mill, Mill Stand 16-1/8", Fac, I-108148• 12 1/2" X 33" X 30", United, I-107176LAMINADORES DE TUBOSTube Mills• 1 1/2", Abbey Etna, No. 1ku, 1976, Stainless Steel Tube Mill, I-107796• 2" X .125 Turek & Heller #Wu-25, Carbon Steel Tube Mill Line, I-108562• 1/2" X 2-1/2" X .095 Aef Model K225 Tube Mill, R-L, I-108800• 2 1/2" (65mm X 3mm) Somenor/Oto Rafted Tube Mill Line, 16mm-65mm, I-108605• .472 - 2.00" X .095 Yoder, No. M2 Tube Mill, L-R,I-108801108801• 2 1/2" Turek & Heller #Wu-20-10, Stainless Steel, Od Cap .625-2.5, W, I-107795• 3" X .134 Yoder Stainless Steel Tube Mill, Min. Tube Diameter .50, I-104581• 4"X.187", Turek&Heller #W30-10 Tig Mill, Stainless Steel, Unc,Siz, I-104577• 2-1/2" Back Chun Stainless, Max. Thickness 2mm-4mm, Line Spd 6 Me, I-108334• Back Chun Tube Mill Line, Max Thickness 4.5mm, Line Spd 6.0 M/Min, I-108444• 2-1/2" Back Chun Stainless, Max. Thickness 2mm-4mm, Line Spd 6 Me, I-108445LINEAS DE CORTE LONGITUDINALSlitting Lines• 36", Stanat #S-180 Line, Payoff 4000#, Recoiler 3-3/8", I-64624• 14" Seco/Ruesch Slitting Line, I-107123• 24" X 1/4" Cams Slitting Line, I-108550• 24" X 15,000# Rizzato Precision Loop Slitting Line, I-108626• 26" Ruesch Slitting Line, Line Spd 0-500fpm, Thick Range 0.025", I-108464• 30"X 4" Dia Broden,20 Hpdc,Yoder Rewind No Motor,2 Spd,16"&18"Man, I-101365• 30" Seco, 16"Id,Cap. 12"Id X 36"Od X 17"Face,Hyd., I-106379• 36", Stanat #S-400-5 36", Drag Board, Head, Scrap Winder, Recoilerw/, I-106053• 36" Yoder, Coil Wt. 13,700, Max Spd.225 Fpm, Coil Dia. 45", Recoil, I-1068924Comuníquese con nosotros para actualizarsu maquinaria o equipo metalúrgico

NATIONAL MACHINERY EXCHANGE, INC.• 7 Stnd, Yoder M1-1/2, 8" Rs, 11" Horiz. Ctr. Dist., 4-6" Vert. Ct, I-105268105268 107791• 18 Stnd, Bradbury, Roll Space 23", Arbor Dia. 1-1/2", Horiz. Cent, I-107791• Yoder, Roll Former #M2, 36"Roll Space, 18" Hc, 2 1/2 Arbor Shaft, I-108474• Mckay No. 700 Series, Custom, Carbon Steel Shaping Mill, Squares, I-108554PORTA ROLLOSReels• Littell #3g, 10"-20" Id, 46" Max Od, 6-1/2" Max Coil W, 1/4 Hp, I-105279• 2000 Lb., Littell, No. 20-12, 12" Max W, 16"-20" Id Range, 48" Max, I-105967• 2500 Lb., Littell, No. 25-18, I-107612• 4000#, Littell #40-18, Od 69", Id 15"-20", Coil Width 18", Hand, I-105300• 20,000 Lb., Littell #S200-36, I-103037• Littell, No. 25-12, I-107615• 1000 Lb., Littell #10, Coil Id 12" To 21", Max Coil Od 48", Max C, I-108028• 5000 Lb., Coe, I-106229• Cooper Weymouth, Max Coil Wt 5000, Max Coil Wd 18", Min-Max Coil, I-107025• 6000 Lb., Paxson, 12" Max. Coil Wd., 40 Hp, I-106806• Wean Double-End, Hyd. 20"W, I-106805• 5000 Lb., Cooper-Weymouth, No. 5000-18m, 1980, Spindle Speed 12.8, I-105297• 8000 Lb., Dallas, No. DPR-824, I-107758PRENSAS DE ALTA VELOCIDADPresses, High Speed Prod• 15 Ton, Minster #B1-15,'60, 1.5" Str, 1.75"Adj, 400 Spm, Bed 10" X, I-62315• 20 Ton, V & O, Spm 200; Sh 17"; Slide Adjustment 3"; Air Clutch A, I-103186• 25 Ton, Bruderer, Bed 530mm x 530mm; Ram 360mm x 540, I-108486• 30 Ton, Oak, St 1.25", Sh 9"-11", Bd 34" X 15.5", Bols 3", Air, Spm 133-, I-104513• 60 Ton, Bliss #660 Ss/Dc, 1-1/2" Str, 2" Adj, 9-1/2" Sfo, Ac, 23-1/2" Wbu, I-105049• 60 Ton Oak #Fp-2-42'67, Rebuilt '80, 1.5" St, 16" Sh, 4" Bol, 150-400 spm, I-106347• 100 Ton, Danly, No. H2-100-48 X 36, 1952, Str 2", Sh 15", Adj 2", I-104198• 100 Ton, Minster #P2-100-54 Piecemaker, 2"St, 27.5"Sh, Bd 53.75" X 31", I-105711• 60 Ton, Bruderer #Bsta 60, 3/4" To 3' Str. 100-800 Spm, I-108266PRENSA DE BASTIDOR EN “C”Presses, Gap Frame• 60 Ton, Johnson #G2-60-72-30, 2" Str, 3.5" Adj, 15" Sh, 40 Spm, I-62515• Rousselle, #6b-48, Str. 2", Sh 12 1/2", 60 Ton, Weight 8600, Thr. 10", I-106096• 85 Tons, Niagara #B4 x 72, '52, 1.5" St, 14" Sh, Bd 73" X 20", Bol 2-7/8", 65s, I-102538• 300 Ton, Bliss, No. Sg2-300-84x32, 5"Str, 1972, I-105990• Niagara #Pn150-72 x 36 Gap Frame Press Str. 6", Sh 14", Adj 5", 30-, I-108734• 60 Ton, Minster, No. 60-4-36, 8" Str, 1963, I-106653• 125 Ton, Niagara, No. B-5 x 60, 8" Str, 1967, I-103968• 15 Ton, Minster #B1-15, Air Cl, 1.5" Str, 1.75" Adj, Bed 17" X 10", I-62295• 32 Ton, Perkins, No. 32s, Hi Spd Gap Frame Press 2 1/2" Str, 1980, I-108489• 45 Ton, Perkins, No. 45s Hi Spd Gap Frame Press, Bed 30" Lr x 18" Fb, I-108487• 45 Ton, Verson #D-45, 4" Str, Ram Area 18" L-R X 14" F-B, 1-1/8" B, I-65205• 75 Ton, Minster #70-5, 8" Str, 40" X 26" Bd, 18" Sh, 14" Adj, 14" Th, I-65230• 100 Ton, Rockford#G-110-1, '80, 10" St, 45" Bd-Lide, 30" Sh-Bd, 25/50, I-101031• 150 Ton, Danly, '74, St 12", Sh 19.5", Adj 4", Bd 50" X 30", Air Cl, 35 Sp, I-105124• Baird G.F.S.C., 2" Str, 3.5" Thr, Bd 14" X 8", Ram 6.5" X 5.25", 7.5" Wb, I-103920PRENSAS DE CORTECUT-OFF PRESSES• 4 Ton, Dahlstrom #1d, 1-1/4" Str, 2" Slide Adj, 1-3/4" Post Dia, 11-1/4 (3Available), I-105342• 20 Ton, Contour 4-Post, 3" Str, 7" Sh, 16" L-R Dbp, Bed 24" X 18", 5-Ax, I-102216• 25 Ton, Yoder #P25, 1-1/4" Cap, 150 fpm, 100 spm, Cutting Str (Std), I-105272• Airam, Pneumatic Flying, I-103333PRENSAS DE EXTRUSIONPresses, Extrusion• 140t, (1400kn), Herlan #Sp-4, W/#Bdz Trimmer, Str.190 Mm, Wall Th, I-65449• 300 Ton, Lombard #El1055 Extrusion Press, 50 Hp, I-108415• Herlan #P6, 215 Nom. Pwr, 270 Overload, 350 Str, 45 Max Dia, 0.12, I-103960• Herlan #Sp6, 215 Nom Pwr, 270 Overload, 350 Str, 45 Max Dia, 0.12, I-103966• Herlan #P8, 1960, 320 Nom Pwr, 400 Overload, 335str, 65 Max Dia, I-103949• 500 Ton, Bliss, Mdl# Hhs, Rod Size 13" Dia, Ram Travel 72", Spd 0, I-107621PRENSAS DE FORJARPresses, Forging• 1000 Ton, Weingarten, Str. 7.8" To 20.9", Sh 31.5", Bed 37.5" X 3, I-108421• 1400 Ton, Gamei, 1996, Str. 19.7", Sh 27.3", Bed 33" X 39.4", Spm, I-108422• 2500 Ton, National "Maxi" Mechanical Forging Press, I-108053• Gamei #Pgh 1400 Friction Screw Forging Press, I-108775• 125 Ton, Etchells, 1975, I-105851• 250 Ton, Etchells, Multiforge Model Mf.20/250, Horizontal Forging, I-108632• Etchells, "Multiforge" Model Mf.20/250, Horizontal, Mechanical Fo, I-108634PRENSAS DE LADO RECTOPresses, Straight Side• 35 Ton, Verson #3b-54t, Str 2", Sh 14", Slide Adj 2-1/2", Spm 120, Sr, I-52805• 64 Ton, Niagara #S2-64-72-24, 4" Str, 2-1/4" Adj, 14" Sh, Fly, 3 Ko, I-63935• 150 Ton, Bliss #7, Trpl Crk, Str:Pl 5", Bl 2", Bed 36.5" X 26", Ram 30, I-102484• 60 Ton, Waterbury-Farrel, Bed 30" X 29", Ram 27" X 21", Ac, Fly, Dvmd, I-105824• 80 Ton,Rousselle #8ss-30-80, Bed 30" X 80", 2-3/4" Bolster, Air, Ted, Sb, I-102978102978 103003• 113 Ton, Minster #50-5-1/2-6165, 11" Str, Bed 48" X 35", Ram 43" X 26", I-103003• 65 Ton, Warco #65-2-60c, Str 6", Sh 20", Bed 60" X 24" Spm 45, Win, I-102033• 65 Ton, Warco 65-2-48c, Str.8", S.H. 29", Adj. 4", Bed 48" X 30", I-102066• 75 Ton, Warco #75-2-96c, 8" Str, 18" Sh, Bed 96" X 26", 4-1/2" Adj, I-103419• 75 Ton, Warco 75-2-72c, Str.8", Sh 19", Bed 72" X 26", Ram 72" X 20, I-102078• 100 Ton, Niagara #67-1/2c-4-1/2-S2-105-48-30, 9" Str, 19" Sh, 3-5/8" Ad, I-105679• 125 Ton, Johnson #S2-125-48, Str. 6", Sh 23", Adj. 4" Bed 48" X 36, I-102194• 150 Ton, Chicago (D&K)#Ss150, Str 6", Shut 7-1/3" To 12-1/2", Bed 10, I-101114• 200 Ton, Minster, Str 2", Air Clutch,Bed 32" X 30", Spm 60, I-103775• 200 Ton, Niagara #Sc2-200-72-36, 1968, 8" Str, 32" Sh, 30-60 Spm, 6, I-103432• 250 Ton, Niagara #Bp2-250-60-42, 12" Str, Bed 60" X 42", 30" Sh, 11" Adj, 28, I-105674• 250 Ton, Warco #250t-2-96c, 18" Str, 32" Sh, 30-60 Spm, Windows 20" X 12", I-103422• 300 Ton Minster Hevi-Stamper No. E2-300-84-48 2-Point Ss Eccentri, I-108535• 300 Ton, Niagara #Bp2-300-54-42, 1974, 2.5" Str, 28" S, 12" Adj, 30-100sp, I-106154• 500 Ton, Bliss #Sc2-500-96-54, 1968, 8" Str, 26" Sh, 40 spm, 12" Adj, 3/60/4, I-106278• 500 Ton, Danly #S2-500-84, 1958, 24" Str, 51" Sh, 14 spm, Bed/Ram 84, I-63002• 100 Ton, Arisa, 10.82" Sh, Ram 14.76" X 14.76", Bd 19.68" X 27.55", Bol 3., I-104454• 150 Ton, Niagara #Sc1-150-33-42, 1977, 12" Str, 37" Sh, 8" Adj, 50, I-64572• 500 Ton, Bliss #510 Sssc Press, I-108778• 500 Ton, Minster #40-10-1/2, 16"Str, Trf, Ted, 14-1/2 Spm, Dbg, B, I-104220• 600 Ton, Verson#S1-600-48-48 1966, Str 12", Spm 16, Sh 39" To Bed, I-103801PRENSAS DE RESPALDO ABIERTOPresses, O.B.I.• 45 Ton, Perkins Obi Press, Bed Lr28" X fb19", Stk. 2-1/2", Slide Ad, I-108488• 60 Ton, Johnson, St 4", Sh 19.5", Bd/Bols 33" X 22.5", Ram 22 "X 15.25", A, I-102101• Bliss #18, 3-3/8" Thr ,6-3/4" Wbu, Fly, Dvmd, 3 Pitmans, Bed 14-1/2" X 8-3, I-105962• Bliss #20m, 10" Wbu, Air, Fly, Dvmd, Bed 22" X 13-1/2", Ram 8-3/4" X 5-1/4", I-105966• 4 Tons, Perkins, I-103468• 40 Ton, Rockford #40w, 3" Str, 10-3/4" Sh, 7-1/8" Thr, Bed 26" X 14", 11-7, I-105252• 50 Ton, V & O #50s, 5" Str, 3" Adj, Bed 32" X 22-1/2", Crank Dia. 3, I-59837• 56 Ton, V & O #5w, 1949, Dial Feed, 8" Str, Sh To Bed 16", Air Cl, I-54961• 60 Ton, Bliss# 21 1/2, 1957, 5" Str., 16" Sht. Hgt., 33.5" X 34", I-102052• 60 Ton, Bliss #C60-B, '65, 6" Str, 35" X 33.5" Bed, 16"Sh, 40-80 Spm, I-103125• 60 Ton, Johnson #60, 1960, 8" Str, 3-1/2" Adj, Bed 32" X 21-1/4", 17, I-628206Compramos y vendemostodo tipo de maquinaria metalúrgica

NATIONAL MACHINERY EXCHANGE, INC.• 25 Ton, American Broach, 8-3/4" Thr, Bed 22" X 16", 7-1/2 Hp, Ram 6" Ram, I-105011• 8 Ton, Denison #S087m, St 12", Day 18", Ram Spds: Clos 330, Pres 1,I-102458• Denison #Ac, 25t, 10" Thr, 12" Str, Bed 21" X 18.5", Ram 8" Dia, 15 Hp, I-105406• 50 Ton, Denison #Na50 Multipress, '52, Str 15", Bd 31.25" X 19.5", I-102962• 60 Ton, Wilson #37g, Bd 36" X 15", 4-Post 2.5" X 1", Side Open. 15" X 36", I -66614• 75 Ton, Hpm #Cu-2, 48"Str, 72" Sh, Bed/Ram 30" X 30", Bols. 4" Thick, I-61283• 91 Ton, Williams & White, 16" Str, 19" Dlo, 1954, Upper & Llower Platens 38, I-58545• 100 Ton Power Team #Spf 100, Dia. Ram 4", 50" Bsf, Bed 17" Front, I-107387• 110 Ton, Waterbury-Farrel #70s, Str.6", Wbu 30", Bed 25-7/8" X 22, I-107540• 150 Ton, Hpm, Single Action, St 24", Dl 50".Bd 36" X 36", Cush 20 To, I-104774• 150 Ton, Meyer & Schnegg, '67, Ram Dia 6.5", Bet Up 11.5" X 6.5", 9.2, I-104045• 200 Ton,Pmf, Bd 55"Lr X 28.5"Fb, Ram 51.5" X 37", Bol 7", 20 Hp/1, I-100848• 200 Ton, Verson#200-Hd1-60t, 24" St, 41" Dl, 24" Sh, Bed 62" X 36", 5" Bol, 50, I-105678• 250 Ton, Farquhar/Oliver, Str. 30"; Bed & Ram 30 X 30; H.P. 125, I-102408• 400 Ton, Williams & White, Down Acting, Heated Platens, Str 36", 75, I-105194• 1000 Ton, Lake Erie #F0351824, 18" Str, 38" Dlo, Bed 48" X 48", W/60 Hp, I-105486• 60000 Ton, Verson Wheelon 60000r-50-240, Tray 50" X 240", Direct Acti, I-105720• Farrel/Watson-Stillman, 4-Post, 8-3/4" Dia. Fixed Bed, 14" X 14" Up, I-106318• Lake Erie, 4-Post, 200 ton, 37" X 36", 4-3/8" Post Dia, Upacting Ram, I-105079• Reichefer, I-103329• 200 Ton, Hpm,4-Post, Bd 36" X 36", Ram Dia 14", Ram St 36", Fast Trav, I-104592• 250 Ton, Bliss #Hd-250-150-H-48-42, 24" Str, Ram 48" X 42", Pl 30', I-101681• 650/250 Ton, Hpm #Sl-3, 4-Post, 133 Ton (Max) Cushion, 18" Bh Thi, I-102571• 300 Ton, Kux, 24" X 24" Distb/Wposts, 0-10" Strtopram, 0-10" Bottom, 10" Dept, I-105899PRENSAS HORIZONTALESPresses, Horizontal• 25 Ton, Danly #V25, 9' Str, 3" Ko Str, 50 Spm, Air Cl/Br, 10 Hp, Lub, I-50941• Waterbury-Farrel #4r-9, Max. Str.11", Max. Die Dia.1-3/4", Max.Cu, I-106916• Waterbury-Farrel #4r-11, Max. Str.11", Max Cup Dia.1-5/16", Max.D, I-106917PULIDORASPolishing Machinery• Backchun Tube Polishing, Tube Dia. 12.7mm-60.5mm, Tube Lg. 2m – 7, I-108338• Comecel #Lst155/2, Dbl Hd Planetary, Feed & Exit Tbls, Oper Console, I-104243• Diequipcorp, No. D2-R2 Ripsizer, 1/4 Hp, 90v Dc, 1725 Rpm, I-107083• Die Equip Corp, No. Dq-Ld, 1/3 Hp, 90v Dc, 1725 Rpm, W/Controls, I-107081• Diequipcorp, No. Dq-Ldr,1/4hp, 90v Dc, I-107084• Hammond, (4) Independent Floor Type Wheel Head, Type 50-81, 15 HP, I-101165• Precise #Do80m, Pins: 1/4" & 3/8" 10,000 - 40,000 Rpm, I-106261• 1/4"-6", Production #101, '66, Fd To 100 Fpm, 2-Belts:6" W X 48", I-100605• Diequipcorp, No. D2-R2 Ripsizer, 1/4 Hp, 90v Dc, 1725 Rpm, I-107083• Die Equip Corp, No. Dq-Ld, 1/3 Hp, 90v Dc, 1725 Rpm, W/Controls, I-107081• Diequipcorp, No. Dq-Ldr,1/4hp, 90v Dc, I-107084• Hammond, (4) Independent Floor Type Wheel Head, Type 50-81, 15 Hp, I-101165• Precise #Do80m, Pins: 1/4" & 3/8" 10,000 - 40,000 Rpm, I-106261• 1/4"-6", Production #101, '66, Fd To 100 Fpm, 2-Belts: 6" W X 48", I-100605• Sumitomo/Jungwoo Stainless Steel Coil Polishing And Hairing Line, I-108692REBORDEADORASFlangers• Felkerweld, I-108200• 5/8", Blue Valley, No. 6, 1950, Stainless Steel 7/16", Diameter 2, I-105716• Blue Valley,6,1950, Mild Steel 5/8"Thick, Stainless Steel 7/16", I-105705• 1", Blue Valley, No. 10, 1972, I-106888• 3/8", Blue Valley #4, 5 Hp Main Motor/Controls, 1 Hp Hyd Pump Mot, I-108070RECTIFICADORAS DE RESORTESWire Machinery, Spring Grinder• Wire Spring Grinding Wheels, Belonging To Besley #905 Ref I-10719, I-107198• Wesley #905, Wheel Dia 32", Spr Max: Dia 1.5", Wire .100", Lg 6"., I-107197ROLADORASRolls• Ajax #6, Forging, Roll Die Width 60", Max Roll Die Dia 44", 300 Hp, I-102447• Marshall-Richards, Forging, Dbl. Hsgs. Type, 6" Dia. Of Forging Dies, 6" R, I-100717• 6' X 1-3/8", Bertsch#18, Plate Bending 15"Roll,Pneu Drop End, Front 2, I-105944• 20' X 1", Bertsch No. 20, Plate Bending, Rolls 23", 20'-2" Overall Lg. Of Ro, I-107755• Lown, No. B-300, Plate Bending, Gauge 16-18, Rolls 4' X 3", Foot Pedal, I-108243• Bertsch, Plate Bending, Size: 10" Dia. X 10'6" W Face, Max. Cap. 1/2", I-108079ROLADORAS DE ANGULORolls, Angle• 2" X 2" X 1/4", Buffalo#1/2, Center Lower Rolls 8", Dia Angle Rolls, I-104075• Buffalo #1vbr, 30 Adj Roll Tonnage, 3.5" Adj Roll Trvl, 11.2 Rpm, I-105760• Tauring #Dr3 Angle Bending Roll, Sq. 3-1/4" X 1/8", Solid Bar 7/8, I-108727• 6" X 6" X 3/4", Herkules, 2000, I-106962• Buffalo, 2-Vbr, Vertical, With Hyd. Adj. Of Top Roll, I-108064• 42" X 16ga, Hendley & Whittemore, 3 Corrugated Rolls 42" Face, Ma, I-63220• Webb No. R3l, 42" W X 7" Dia., 5 Hp 3/60/480 Volt, Guile Roll Adj, I-58649• 42" X 12 Ga., Webb, No. R3lr-7003-S, 48" Width, Brake 230/460v, T, I-100709• 6' X 1-3/8", Bertsch #18, 15"Roll Dia, Pneu Drop End, Md Adj, :Front 2, I-105944• 20' X 1", Bertsch No. 20, Dia.Rolls 23", 20'-2" Overall Lg. Of Ro, I-107755• Lown, No. B-300, Gauge 16-18, Rolls 4' X 3" Dia., Foot Pedal, I-108243• Bertsch, Roll Size: 10" Dia. X 10'6" Wide Face, Max. Cap. 1/2", I-108079• 5/7.5 Tons, Ransome #Apr, Rubber Cover Driver/Idler Rolls, Dia 5", I-105985• Teledyne 20,000#, Pendant Control W/Fwd/Rev/Jog/Run,1 Drive Roll, I-106047• 15 Ton, Pandjiris #Pr 30/10, Load 5 Ton, Turning 15 Ton, 6"Thru87"T, I-106048• W/Driver & Idler Rolls, Rubber Covered, C-C Wheel Dist 39"-68.5", 3w, I-105988SIERRASSaws• Horizontal, Boyer-Schultz, No. Hy 104902, I-103396• Horizontal, Startrite, No. H225, I-106832• Horizontal, 10" X 11", Kysor-Johnson, Blade Size 137"X1"X.035",Hg.2, I-106224• Kaltenbach, No. Hdm-1300 Saw,Cap. Wall Dia. 1/2"-3/8", Beam CAP, I-108546• Billet, Loma #Sph-26, 8" Cap., 102" Max Billet Lg, 15" C/O Lg, I-105707… Y MUCHO MAS, TENEMOS EL INVENTARIO MÁS GRANDE EN LOS E.E.U.U.EN NATIONAL SOMOS ESPECIALISTAS EN MAQUINARIA METALÚRGICACizallasCortadoras de Tubo, Cañería y BarraDobladoras de tubo, barra y alambreEncabezadoras en fríoEnderezadoras de laminas, tubo, barra y alambreMaquinas de clavos y pernosEnroscadorasEstiradoras de alambreFormadoras de tuercas y alambreFormadoras de tuboLaminadorasLíneas de corte longitudinal y transversalMaquinas para resortesPerfiladoras para LaminasPestañadorasPrensas de todo tipoRoladoras de láminasTerminadoras de tubo¡SI ES MAQUINARIA, NOSOTROS LA TENEMOS!Estamos localizados a unos pasos del aeropuerto en la ciudad de Newark. • A solo minutos de la ciudad de Nueva York. • Nos encargamos de toda latransportación – Local o Internacional. • Hablamos Español, Alemán, Italiano y Portugués • También somos certificados en servicios de Avalúos y LiquidacionesPARA MAS INFORMACIÓN CONTACTE A RAY ALVAREZ A RAY@NATIONALMACHY.COM158 PARIS STREET, NEWARK, NEW JERSEY 07105 USATELÉFONOS +1.973.344.6100 • FAX +1.973.589.0944 • GRATIS DESDE MÉXICO +1.800.351.5394WWW.NATIONALMACHY.COM • SALES@NATIONALMACHY.COM