NEW 2010 Circular Interconnects Catalog - All sections - 12-C3

Rectangular InterconnectsFor a Wide Range of Applications, MilitaryAmphenolAerospaceHybrid Rectangular Connectors with Brush/Power/Coax/Fiber Optic CombinationsReference Catalog 12-035Power/Coax/Brush ContactCombinationsLRM Surface Mount Connectors with Brush ContactsReference Catalog 12-037*Chevron Grid - Up to300 Contacts in 6 Rows.Staggered Grid - Up to 360Contacts in 8 Rows.GEN-X Grid - Up to 472Contacts in 8 Rows.APPLICATION STANDARDS/ COUPLING/ CONTACT PERFORMANCEREQUIREMENTS MOUNTING TERMINATION/ ENVIRON./ELECT.ARRANGEMENTSLine replaceablemodular interconnectswith very highcontact densities,for attachmentto printed circuitboards. ContainBristle Brushcontacts, consistingof multiple strandsof high tensilestrength wirethat are bundledtogether to form a“brush-like” contact.LRM connectorsare available inSEM-E and customform formats.Uses BristleBrush contactwhich meetsMIL-DTL-55302.Amphenol staggeredgrid LRMconnector is theF-22 Avionicssystem connectorchoice.OPTIONAL FEATURES• Wide range of combinations available for PCB/heat sink accommodations.• Ruggedized VME64-X is another LRM type connector - See next page.• Hybrid arrangements with Brush contacts, coaxial, power and fiber optics areavailable in the Staggered grid style.APPLICATION STANDARDS/ COUPLING/ CONTACT PERFORMANCEREQUIREMENTS MOUNTING TERMINATION/ ENVIRON./ELECT.ARRANGEMENTSRectangularconnectors for attachmentto printedcircuit boards.Offers versatility ofcombining contacttypes- power, coax,twinax, fiber opticsand Brush contactsin one high densitypackage.M55302 typerectangularconnectors withhybrid contactarrangements.Power contactsand shieldedcoax or twinaxcontacts meetM39029 standards.Fiber optictermini meetM29504/4 & /5standards.Fiber Optics/Brush ContactCombinationsOPTIONAL FEATURES• Hybrid configurations are available with fiber optics and brush contacts. (Seephoto above and Fiber Optic section of this catalog).• Hybrid configurations are available with power and/or shielded (coax or twinaxcontacts. (See photo shown above).Variety of Rectangular Interconnection Products,including LRMs and Low Mating Force BrushConnectors. Also shows the OBIS, Optic-ElectricBackplane.Same as shownabove for Low MatingForce rectangularconnectors.Modules: Surfacemount/Straddlemount with .0375spacing betweenleads, with rows ofleads on each sideof the module. Canbe centered or offcenteredmounted.Backplanes: Availablewith throughholesolder posts orwith compliant pins.Polarization:Insert arrangementcontrols matingorientation. Up to4096 keyingcombinations.Combinations oftermination styles:• Brush contacts (asdescribed above)• Power contacts -(standard M39029size 16 or 12;same as used inMIL-DTL-38999Series II)• Coax or twinaxcontacts -(M39029, size 16and 12)• Fiber optic termini(multi-mode size16; same as usedin MIL-DTL-38999Series III)Brush contacttermination.Chevron Grid:Backplane termination:PCB throughholesolder.Module/LRM termination:Surfacemount on 0.025pitch.Staggered Grid:Backplanetermination: PCBthrough-hole solderor solderlesscompliant into0.025 platedthroughholes.Module/LRMtermination:Surface mount on0.025 pitch to flexcircuit.GEN-X Grid:Backplanetermination: PCBthrough-hole solderor solderlesscompliant into0.025 platedthroughholes.Module/LRM termination:Surfacemount on 0.0375pitch to rigid flexcircuit boards.MARKETS• Military and Commercial Aviation• Military Vehicles and GPS SystemsConnector performanceand brushcontact performanceis the same as shownabove for Low MatingForce Rectangularconnectors. Opticalperformances of fiberoptic termini are thesame as termini usedin multi-channelcircular connectors.MARKETS• All markets of Rectangular Low Mating Force Connectors,as shown above.Operating temp. from –65°Cto +125°C. Suitable for vaporphase soldering.Connector bodies are aluminumalloy with electrolessnickel finish.Superior performanceunder vibration. Connectorconfigurations are capableof supporting data rates inexcess of 1 Gbps.Staggered and GEN-Xstyles are standard withESD protection - see below.Bristle Brush contactsprovide:• Low mating/unmatingforces - 70% to 90%reduction from conventionalpin and socket contacts.• Proven durability and longcontact life - over 20,000cycles of mating andunmating without performancedegradation.• Multiple points (14-17) ofcontact per mated contact.• Intermittency-freeperformance.• Redundant current paths(stable, low resistance).• Proven electrical and gastight contact sites.38999III II I SJT26482 83723 III 5015Matrix 2Matrix PyleCrimp RearRelease Matrix26500 PylePrintedCircuit BoardEMI FilterTransientFiber OpticsHigh SpeedContactsOptionsOthersContact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com433