NEW 2010 Circular Interconnects Catalog - All sections - 12-C3

AmphenolAerospaceCoaxial Contacts for MIL-DTL-5015,Heavy Duty MIL-DTL-22992 General DescriptionOptions High SpeedEMI Filter Printed5015 83723 III 26482 38999OthersFiber OpticsTransient Circuit Board26500 Pyle Crimp RearContacts Release Matrix Matrix Pyle Matrix 2 SJT I II IIIAmphenol ® Coaxial Contacts- can be incorporated into MS/StandardMIL-DTL-5015 Type Circular Connectors and Heavy Duty MIL-DTL-22992 Connectors.They offer the same durability advantages and design benefits for reliableinterconnection as the Amphenol coax contacts used in high performance D38999connectors. A variety of military and commercial shielded cables are accommodatedwithin these circular series.Other features of the coax contacts available for MS/Standard and Heavy Dutycirculars include:• Several insert arrangements that can incorporate:• Size 4, 8 and 12 coax contacts• Advanced shielding wire technology in a rugged military connector• Single connector with multiple coaxial connection eliminates cross-mating• Positive contact captivation - especially important in these series with its muchhigher coupling/uncoupling force• Older shielded cable type availabilityCoax Contact, Pinfor use in MS/Standard MIL-DTL-5015 andHeavy Duty MIL-DTL-22992 ConnectorsCoax Contact, Socketfor use in MS/Standard MIL-DTL-5015 andHeavy Duty MIL-DTL-22992 ConnectorsTYPICAL ELECTRICAL PERFORMANCESize 4, 8 & 12 ContactsContact Resistance:Center @ 1 Amp, 170 millivolts max. voltage drop @ 25°COuter @ 12 Amps, 150 millivolts max. voltage drop @ 25°CDielectric Withstanding Voltage:Size 4 & 8: 1,300 VAC Rms @ sea levelSize 12: 1,000 VAC Rms @ sea levelSize 4, 8 & 12: 250 VAC Rms @ 50,000 ft.Insulation Resistance5,000 megohms minimum @ 25°CAll contacts in these series are non-impedance matched contacts.Part numbers 21-33063-XX( ) and 21-33064-XX( ) are moisture sealdesign (internal O-ring).CONTACT FINISHES:Suffix Finish1 0.00020 min. silver over copper flash2 0.00005 min. gold (Knoop hardness 130-200) over silver3 0.00010 min. gold (Knoop hardness 130-200) over silver4 0.00010 min. gold (Knoop hardness 130-200) over copper5 0.00005 min. gold (Knoop hardness 130-200) over nickelE 0.00005 min. gold (Knoop hardness 90 max.) over copperF 0.00005 min. gold (Knoop hardness 130-200) over copperH 0.00010 min. gold (Knoop hardness 130-200) over copper408 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com