NEW 2010 Circular Interconnects Catalog - All sections - 12-C3

AmphenolAerospaceAdditional MIL-DTL-26482 Circular Connectorsfrom AmphenolOptions High SpeedEMI Filter Printed5015 83723 III 26482 38999OthersFiber OpticsTransient Circuit Board26500 Pyle Crimp RearContacts Release Matrix Matrix Pyle Matrix 2 SJT I II IIIMIL-DTL-26482, Series 1 Circular connectors are shownin detail in Amphenol Industrial Operations’ catalog12-070, which can be supplied upon request or visit www.amphenol-industrial.com.Briefly the MIL-DTL-26482 Series 1 circulars aredescribed as follows:PT, SP, MS/PTCommercial/MIL-DTL-26482, Series 1These are bayonet type with solder contacts. Both theinsert and main joint gasket are molded from resilientneoprene. This provides excellent moisture sealing at thegasket and superior electrical isolation of the contact inthe inserts.Socket contacts are closed entry design. Printed circuitboard contacts are also available in this series.The SP is a modification of the PT providing special shellswith a wide mounting flange for back panel mounting. TheSP also has a durable non-conductive hard anodic“Alumi lite” coating which provides abrasion and corrosionprotec tion.There are 8 shell styles in the PT, SP and MS/PT series,and shell sizes are 6-24. The PT solder is UL recognized.Her metics are also available.PT-SE, SP-SE, MS/PT-SECommercial/MIL-DTL-26482, Series 1These are a derivative of the PT line, bayonet type.How ever, they incorporate crimp contacts that are rearinsert able, front releasable. An MS approved spring towerretention system holds the contacts in place.MIL-DTL-26482, Series 1ConnectorsThere are several additional connectortypes within the Amphenol ®MIL-DTL-26482 fam ily. MIL-Spec andcommercial versions are available withvarying design characteris tics andcustomer options to meet costconsiderations and to provide users withthe most design flexibility possible.PT-CE, SP-CECommercial crimp typeAnother derivative of the PT line, bayonet type. These alsohave crimp contacts that are rear insertable, frontreleasable, but the contacts are held in place by a nylonwafer retention system. The voidless one-piece insert andgrom met assembly provide continuous dielectricseparation between contacts.PC, PC-SE, PC-CECommercial solder and crimp typeThe PC series within the Amphenol ® miniature circularfamily is threaded coupling, rather than bayonet coupling.The threads are double-stubbed so they can not becross threaded.The PC is offered with solder contacts. The PC-SE hascrimp contacts in a spring tower retention system, whilethe PC-CE has crimp contacts in a nylon wafer retentionsystem. Hermetics are availableAll miniature circular are intermateable andintermountable with each other except for the threadedcoupling PC Series.For further information ask for catalog 12-070. ConsultAmphe nol Industrial Operations, Sidney, NY for anyassistance on these products or for any specificapplication needs. See catalog 12-070 online at www.amphenol-industrial.com120 Contact Amphenol Aerospace for more information at 800-678-0141 • www.amphenol-aerospace.com