Compact cylinders ADN/AEN, to ISO 21287 - Allied Automation, Inc.

Compact cylinders ADN-KP, standard port pattern, with clamping unitTechnical dataImpact energy [J]Piston ∅ 20 25 32 40 50 63 80 100Max. impact energy at the end positions 0.2 0.3 0.4 0.7 1 1.3 1.8 2.5Permissible impact velocity:Maximum permissible load:2xE perm.v perm. = mdead + m loadm load = 2xE perm.v 2− m deadv perm.E perm.m deadm loadPermissible impact velocityMax. impact energyMoving load (drive)Moving work load-H- NoteThese specifications represent themaximum values which can be reached.Note the maximum permittedimpact energy.Forces [N]Piston ∅ 20 25 32 40 50 63 80 100Theoretical force at 6 bar, advancing 188 295 483 754 1178 1870 3016 4712Theoretical force at 6 bar, retracting 141 247 415 633 990 1682 2721 4418Static holding force 350 350 600 1000 1400 2000 5000 5000-H- NoteThe specified holding force refers to astatic load. If this value is exceeded,slippage may occur. Dynamic forcesoccurring during operation must notexceed the static holding force. Theclamping unit is not backlash-free inthe clamped condition if varyingloads are applied to the piston rod.Activation:The clamping unit may only be releasedif the forces at the piston havereached equilibrium. Otherwise, thereis a risk of accidents due to suddenmovement of the piston rod. Blockingoff the air supply at both ends(e.g. with a 5/3-way valve) does notprovide any safety.Max. lateral force Fq as a function of the projection x∅ 20∅ 25∅ 32/40∅ 50/63∅ 80/100Weight [g]Piston ∅ 20 25 32 40 50 63 80 100Productweightwith0mmstroke 282 344 503 789 1268 1894 3973 5497Additional weight per 10 mm stroke 22 26 29 45 60 68 93 112Moving load with 0 mm stroke 53 63 100 173 296 368 755 932Additional load per 10 mm stroke 6 6 9 16 25 25 39 392010/02 – Subject to change Internet: www.festo.com/catalogue/...39