Compact cylinders ADN/AEN, to ISO 21287 - Allied Automation, Inc.

Compact cylinders ADN-KP, standard port pattern, with clamping unitTechnical dataFunctionVariantsK2-N- Diameter20 … 100 mm-T- Stroke length10 … 500 mmK5K8-H- NoteAdditional measures are required foruse in safety-related control systems;in Europe, for example, the standardslisted under the EC MachineryDirectivemustbeobserved.Withoutadditional measures in accordancewith statutory minimum requirements,the product is not suitable foruse in safety-related sections ofcontrol systems.General technical dataPiston ∅ 20 25 32 40 50 63 80 100Pneumatic connection Cylinder M5 M5 Gx Gx Gx Gx Gx GxKP M5 M5 M5 Gx Gx Gx Gx GxFemale piston rod M6 M8 M10 M12thread K5 M5 M6 M8 M10Male piston rod thread M8 M10x1.25 M12x1.25 M16x1.5K5 M10, M10x1.25 M10, M12 M12, M16 M16, M20, M20x1.5Max. axial backlash withclamped piston rod without loadConstructional designCushioningPosition sensingType of mountingMounting positionClamping type with effective direction ofaction[mm] 0.5 0.7PistonPiston rodCylinder barrelFlexible cushioning rings/pads at both endsVia proximity sensorVia through-holesVia female threadsVia accessoriesAnyFrom both sidesOperating and environmental conditionsOperating mediumFiltered compressed air, lubricated or unlubricatedOperating pressure [bar] 1.5 … 10Min. release pressure [bar] 3Ambient temperature 1) [°C] –10 … +80Corrosion resistance class CRC 2) 21) Note operating range of proximity sensors2) Corrosion resistance class 2 to Festo standard 940 070Components subject to moderate corrosion stress. Externally visible parts with primarily decorative surface requirements which are in direct contact with a normal industrial environment or media such as coolants orlubricating agents38 Internet: www.festo.com/catalogue/...Subject to change – 2010/02