Compact cylinders ADN/AEN, to ISO 21287 - Allied Automation, Inc.

Compact cylinders ADN, to ISO 21287Key featuresVariants from the modular systemSymbol Key features DescriptionS1 Reinforced piston rod Increased lateral forces. Absorbs many times more lateral force than a basiccylinderS2 Through piston rod For working at both ends with the same forces in the advance and returnstroke, for attaching external stopsS6 Heat-resistant seals Temperature resistance up to max. 120 °CS10Constant (slow speed) operation at low pistonspeedsSuitable for slow stroke movements at a constant, judder-free speed over thefull stroke of the cylinder.Seal contains silicone grease (not free of paint-wetting impairment substances)S11 Low friction The special seals considerably reduce system wear. This corresponds to aconsiderably lower response pressure.Seal contains silicone grease (not free of paint-wetting impairment substances)S20 Through, hollow piston rod For carrying vacuum, small parts, media, etc.K2 Extended male piston rod thread –K5 Special piston rod thread Metric standard thread to ISOK8 Extended piston rod –K10 Smooth anodised aluminium piston rod Ideal for use in welding environments:– Protection against welding spatter– Small moving loads– Harder surface compared to steel–LongservicelifeKP With clamping unit Integrated clamping unit on the piston rodEL With end position lock Positive lock in the end position as drop guard. If there is a drop in pressure,the piston rod is secured in its end position to prevent it from droppingQ Squarepistonrod Protection against torsion. For correctly oriented feedingR3 High corrosion protection All external cylinder surfaces comply with corrosion resistance class 3 to Festostandard 940 070. The piston rod is made from corrosion and acid resistantsteelR8 Dust protection (wiper seal) Thecylinderisequippedwithahard-chromeplatedpistonrodandarigidwiper seal, which protects against dry, dusty mediaTL Captive rating plate Laser etched rating plate. For easy identification when it comes to replacement,even after years in a harsh environmentTT Low temperature Temperature resistance up to max. –40 °C-H- NoteSoftware tools and configuration ofFesto product moduleswww.festo.com2010/02 – Subject to change Internet: www.festo.com/catalogue/...3