SAM4s ER-5115 Operators Manual.pdf

Management FunctionsIntroductionAll Management Functions take place with the control lock in the X position. In this way only thosewith the correct key will have access to these functions. Some register operations may beprogrammed to require the control lock in the X position in order to operate. All reports require akey that will access the X or Z position.In this chapter you will find: "Manager Authorization Of Restricted Operations" on page 63 "Changing the Default PLU Level" on page 64 "Cash Declaration" on page 64 "System Reports" on page 66Manager Authorization Of Restricted OperationsIf pressing a function key causes an error condition when used properly, the function may require thecontrol lock in the X (or Management) position. See "Function Key Programming" on page 109 forsetting these conditions.Function keys, which may be programmed to require the control lock in the X position, are:VoidReceived on AccountPaid OutMerchandise Return% KeysCheck CashingSAM4s ER-5115 Electronic Cash Register Management Functions 63