SAM4s ER-5115 Operators Manual.pdf

More documents

Recommendations

Info

1-2 Servicing PrecautionsWARNING: First read the-Safety Precautions-section of this manual. If some unforeseen circumstance creates a conflictbetween the servicing and safety precautions, always follow the safety precautions.WARNING: An electrolytic capacitor installed with the wrong polarity might explode.1. Servicing precautions are printed on the cabinet.Follow them.2. Always unplug the units AC power cord from theAC power source before attempting to:(a) Remove or reinstall any component or assembly(b) Disconnect an electrical plug or connector(c) Connect a test component in parallel with anelectrolytic capacitor3. Some components are raised above the printedcircuit board for safety. An insulation tube or tapeis sometimes used. The internal wiring is sometimesclamped to prevent contact with thermally hotcomponents. Reinstall all such elements to theiroriginal position.4. After servicing, always check that the screws,components and wiring have been correctlyreinstalled. Make sure that the portion around theserviced part has not been damaged.5. Check the insulation between the blades of the ACplug and accessible conductive parts (examples :metal panels and input terminals).6. Insulation Checking Procedure:Disconnect the power cord from the AC source andturn the power switch ON. Connect an insulationresistance meter (500V) to the blades of AC plug.The insulation resistance between each blade of theAC plug and accessible conductive parts (seeabove) should be greater than 1 megohm.7. Never defeat any of the B+ voltage interlocks.Do not apply AC power to the unit (or any of itsassemblies) unless all solid-state heat sinks arecorrectly installed.8. Always connect an instrument’s ground lead to theinstrument chassis ground before connecting thepositive lead ; always remove the instrument’sground lead last.1-3 Precautions for Electrostatically Sensitive Devices (ESDs)1. Some semiconductor (solid state) devices are easilydamaged by static electricity. Such components arecalled Electrostatically Sensitive Devices (ESDs);examples include: integrated circuits and some fieldeffecttransistors. The following techniques willreduce the occurrence of component damage causedby static electricity.2. Immediately before handling any semiconductorcomponents or assemblies, drain the electrostaticcharge from your body by touching a known earthground. Alternatively, wear a discharging wriststrapdevice. (Be sure to remove it prior to applyingpower - this is an electric shock precaution.)3. After removing an ESD-equipped assembly, place iton a conductive surface such as aluminum foil toprevent accumulation of electrostatic charge.4. Do not use freon-propelled chemicals. These cangenerate electrical charges that damage ESDs.5. Use only a grounded-tip soldering iron whensoldering or unsoldering ESDs.6. Use only an anti-static solder removal device. Manysolder removal devices are not rated as anti-static;these can accumulate sufficient electrical charge todamage ESDs.7. Do not remove a replacement ESD from itsprotective package until you are ready to install it.Most replacement ESDs are packaged with leadsthat are electrically shorted together by conductivefoam, aluminum foil or other conductive materials.8. Immediately before removing the protectivematerial from the leads of a replacement ESD,touch the protective material to the chassis orcircuit assembly into which the device will beinstalled.9. Minimize body motions when handling unpackagedreplacement ESDs. Motions such as brushingclothes together, or lifting a foot from a carpetedfloor can generate enough static electricity todamage an ESD.
ContentsIntroduction 7About the SAM4s ER-5115 ........................................................................................................7Using This Manual.....................................................................................................................8Using Flowcharts .........................................................................................................8Basic Features and Functions .....................................................................................................9Display.......................................................................................................................10Printer ........................................................................................................................14Sample Receipt ..........................................................................................................14Changing the Printer Ribbon Cartridge......................................................................16Changing Paper..........................................................................................................17Control Lock..............................................................................................................19Keyboard....................................................................................................................20Operations 21Overview..................................................................................................................................21Function Key Descriptions.......................................................................................................21Clerk Sign-On/Sign-Off ...........................................................................................................25Direct Sign-On...........................................................................................................25Coded Sign-On...........................................................................................................25Receipt On and Off ..................................................................................................................26PLU Registrations ....................................................................................................................27Keyboard PLU Entries...............................................................................................27Keyboard PLU Level Entries.....................................................................................30Numeric PLU Entries.................................................................................................31Percentage Key (%) Registrations............................................................................................33Void and Correction Operations ..............................................................................................36Error Correct..............................................................................................................36Previous Item Void ....................................................................................................37Merchandise Return...................................................................................................38VOID Control Lock Position (Transaction Void)......................................................39Cancel ........................................................................................................................40Subtotal Operations..................................................................................................................41Subtotal......................................................................................................................41Tray Subtotal (Add Check)........................................................................................41Eat-In/Take-Out/Drive Thru Operations....................................................................42Tax Shift Operations ................................................................................................................43Tendering Operations...............................................................................................................45Cash ...........................................................................................................................45Check .........................................................................................................................45Charge........................................................................................................................46Split Tender ...............................................................................................................47Post Tendering...........................................................................................................47Receipt on Request...................................................................................................................48SAM4s ER-5115 Electronic Cash Registeriii
Page 1 and 2: SAM4s ER 5115 Electronic Cash Regis
Page 3: Precaution StatementsFollow these s
Page 7 and 8: Straight Percentage Tax Rate Progra
Page 10 and 11: Using This ManualWith this manual w
Page 12 and 13: DisplayThe SAM4s ER-5115 comes with
Page 14 and 15: Numbered Error ConditionsPLURPTAMOU
Page 16 and 17: PrinterModel:Features:ERP-400Receip
Page 19 and 20: Changing PaperLoading the Receipt P
Page 21 and 22: Control LockThe control lock has 7
Page 23 and 24: OperationsOverviewThe operations se
Page 25 and 26: Keyboard LegendEAT-INTAKE OUTDRIVE
Page 27 and 28: Clerk Sign-On/Sign-OffSee "System O
Page 29 and 30: PLU RegistrationsAll registrations
Page 31 and 32: DATE 08/15/2003SUN21 X/TIME5 0 0 PL
Page 33 and 34: Numeric PLU EntriesIn the following
Page 35 and 36: Percentage Key (%) RegistrationsThe
Page 37 and 38: DATE 08/15/2003SUN1 0 0 PLU #1% 2PL
Page 39 and 40: Previous Item VoidThe previous item
Page 41 and 42: VOID Control Lock Position (Transac
Page 43 and 44: Subtotal OperationsSubtotalPress th
Page 45 and 46: Tax Shift OperationsWhen tax shift
Page 47 and 48: Tendering OperationsCashDATE 08/15/
Page 49 and 50: Split TenderThe drawer will not ope
Page 51 and 52: Training ModeA training mode is ava
Page 53 and 54: Received on AccountUse the RECD ACC
Page 55 and 56:
Restaurant OperationsThe SAM4s ER-5
Page 57 and 58:
PaymentsPayments may be received an
Page 59 and 60:
Promo FunctionThe PROMO key allows
Page 61 and 62:
Food Stamp OperationsThe SAM4s ER-5
Page 63 and 64:
Scale With Automatic Tare EntryPlac
Page 65 and 66:
Management FunctionsIntroductionAll
Page 67 and 68:
Or, enter each denomination separat
Page 69 and 70:
Report TableReport TypeReportNumber
Page 71 and 72:
Financial Report Example, Continued
Page 73 and 74:
Optional Abbreviated Financial Repo
Page 75 and 76:
Time Report Example (Report #2)DATE
Page 77 and 78:
PLU Report Example, ContinuedPLU 54
Page 79 and 80:
Clerk Report Example (With Cashier
Page 81 and 82:
Clerk Report Example, ContinuedCLER
Page 83 and 84:
Daily Sales Report Example (Report
Page 85 and 86:
Item by Group Report Example, Conti
Page 87 and 88:
Inventory PLU Report Example (Repor
Page 89 and 90:
System BalancingPLU Sales Total+/-
Page 91 and 92:
ProgrammingOverviewIn this chapter
Page 93 and 94:
Function Key Assignment Programming
Page 95 and 96:
Tax ProgrammingThe SAM4s ER-5115 ha
Page 97 and 98:
Tax Table ProgrammingIn some cases,
Page 99 and 100:
PLU ProgrammingAll PLUs, whether th
Page 101 and 102:
Program 100 - PLU Status Programmin
Page 103 and 104:
Program 150 - PLU Group AssignmentE
Page 105 and 106:
Program 250 - PLU Stock Amount Prog
Page 107 and 108:
Descriptor Code ChartCHAR SPACE ! "
Page 109 and 110:
Delete PLU Links1. Turn the control
Page 111 and 112:
System Option TableAddress SYSTEM O
Page 113 and 114:
Address SYSTEM OPTION VALUE = SUM20
Page 115 and 116:
Address SYSTEM OPTION VALUE = SUM39
Page 117 and 118:
Function Key Programming SummaryThe
Page 119 and 120:
Program 80 - Function Key Descripto
Page 121 and 122:
#/No Sale - Function Key ProgramsOp
Page 123 and 124:
Cash - Function Key ProgramsOptions
Page 125 and 126:
Check - Function Key ProgramsOption
Page 127 and 128:
Currency Conversion - Function Key
Page 129 and 130:
Eat-In - Function Key ProgramsOptio
Page 131 and 132:
Food Stamp Tender - Function Key Pr
Page 133 and 134:
Previous Balance - Function Key Pro
Page 135 and 136:
Paid Out - Function Key ProgramsOpt
Page 137 and 138:
Return - Function Key ProgramsOptio
Page 139 and 140:
Table # - Function Key ProgramsOpti
Page 141 and 142:
Tax Exempt - Function Key ProgramsO
Page 143 and 144:
Void - Function Key ProgramsOptions
Page 145 and 146:
% Key - Function Key ProgramsOption
Page 147 and 148:
Clerk ProgrammingClerks (which may
Page 149 and 150:
Program 810 - Clerk Descriptor Prog
Page 151 and 152:
Miscellaneous ProgrammingProgram 95
Page 153 and 154:
Descriptor Code ChartCHAR SPACE ! "
Page 155 and 156:
Programming Group Descriptors1. Tur
Page 157 and 158:
Drawer Limit ProgrammingYou can set
Page 159 and 160:
Date and Time ProgrammingThe SAM4s
Page 161 and 162:
Program ScansSince much time and en
Page 163 and 164:
Tax Program ScanDATE 08/15/2003SUND
Page 165 and 166:
Clerk Program ScanDATE 08/15/2003SU
Page 167 and 168:
Receipt Message Program ScanDATE 08
Page 169 and 170:
Key Location Program ScanDATE 08/15
Page 171 and 172:
Glossary of TermsActivity CountThe
Page 173 and 174:
No SaleNo sale is an operation to s
Page 175 and 176:
Index##/No Sale - Function Key Prog
Page 177 and 178:
manager control% key · 143Cancel k
show all

SAM4s ER-5115 Operators Manual.pdf

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?