SAM4s ER-5115 Operators Manual.pdf

Drawer Limit ProgrammingYou can set the total amount of cash and checks allowed to be in cash drawer at one time. (When thelimit is equaled or exceeded, the error tone will sound at the completion of each transaction. You canclear the error to continue operations, or you can use the Paid Out function to remove enough cash orchecks to reduce the drawer total below the limit set here.)Programming the Drawer Limit1. Turn the control lock to the P position.2. To begin the program, enter 1 2 0 0, press the SBTL key.1200 SBTL3. Enter a drawer limit (up to 8 digits or 0 for no limit); press the X/TIME key.Enter the drawerlimit, up to 8digitsX/TIME4. Press the CASH key to finalize the program.CASHMachine Number ProgrammingYou can set a machine number to print on the receipt and journal paper. If you have multipleregisters or stores, use this number to identify the machine where the transaction took place.Programming the Machine Number1. Turn the control lock to the P position.2. To begin the program, enter 1 3 0 0, press the SBTL key.1300 SBTL3. Enter a machine number (up to 2 digits); press the X/TIME key.X/TIME4. Press the CASH key to finalize the program.CASHSAM4s ER-5115 Electronic Cash Register Programming 155