SAM4s ER-5115 Operators Manual.pdf

Group Status and Descriptor Programming21 Group totals are available to accumulate totals of individual PLUs that are assigned to each group.Each PLU can be assigned to one or two different groups. (See "Program 150 - PLU GroupAssignment" on page 101 to program PLU groups for each PLU.)Use program 900 to assign a group status, i.e. a group can be set to not add to the totalof all groups, or a group can be used to designate like items for kitchen printerassignment.Use program 910 to assign a unique descriptor for each group, so that the group may beeasily understood on the group report.Programming Group Status - Program 9001. Turn the control lock to the P position.2. To begin the program, enter 9 0 0, press the SBTL key.900 SBTL3. Enter the number (1-20) of the group you wish to program; press the X/TIME key.X/TIME4. Enter an option digit from the table below, press the SBTL key.OPTION VALUE = SUMThis group does not add to the group total? Yes = 1No = 0This group is a kitchen printer group? Yes = 2No = 0SBTL5. To program additional groups, repeat from step 3, or press the CASH key to finalize theprogram.CASH152 Programming SAM4s ER-5115 Electronic Cash Register