SAM4s ER-5115 Operators Manual.pdf

System Option ProgrammingRefer to the “System Option Table” on page 109 to review the system options. Read each optioncarefully to determine if you wish to make any changes.NOTE: Because after clearing memory all options settings are automatically set to 0, andbecause your most likely option selections require a status setting of 0, you do not need toprogram this section unless you wish to change the default status.Programming a System Option:1. Turn the control lock to the P position.2. Enter 3 0, press the SBTL key.3. Enter a system option address, press the X/TIME key.4. Enter the number representing the status you have selected, or if there is more than onedecision to be made in an address, add the values representing your choices for eachdecision and enter the sum. Press the SBTL key.5. Repeat from step 3 for each system option you wish to change.6. Press the CASH key to end system option programming.System Option FlowchartRepeat for eachSystem Option30SBTLX/TIMESBTLCASHOption #Status108 Programming SAM4s ER-5115 Electronic Cash Register