SAM4s ER-5115 Operators Manual.pdf

Program 250 - PLU Stock Amount ProgrammingWith this program, you can you can add stock to the PLU sales counters for PLUs you havedesignated as stock keeping PLUs. See "Program 100 - PLU Status Programming" on page 99 to setup stock keeping PLUs. The stock number set here can be the amount of stock that is being added tothe current level, or optionally, it can be the new total stock level. See option #40 in "System OptionProgramming" on page 108 to set this option.1. Turn the control lock to the P position.2. To begin the program, enter 2 5 0, press the SBTL key.250 SBTL3. Select the PLU or PLUs you wish to program in one of the following ways:Press a PLU key on the keyboard, orPLUPress multiple PLU keys that are to receive the same status, orPLU PLU PLU PLUPress a level key, then an PLU key, orLEVEL1/2/3PLUEnter the number of the PLU (1-1000) and press the PLU key, orPLUEnter the number (1-1000) of the first PLU in a range of PLUs that are to receivethe same setting; press the PLU key. Enter the last number (1-1000) in the range;press the PLU key.PLUPLU4. Enter the stock amount you wish to add (up to four digits), press the X/TIME key.Stock AmountX/TIME5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize theprogram.CASHSAM4s ER-5115 Electronic Cash Register Programming 103