SAM4s ER-5115 Operators Manual.pdf

Program 150 - PLU Group AssignmentEach PLU may report to any two of 21 groups. Group totals appear on reports, so that you can tracksales of different types of items. A group can also be used to designate items that are to print on anoptional kitchen printer.Note: The PLU will report to group "0", if not programmed to report to groups 1-20.1. Turn the control lock to the P position.2. To begin the program, enter 1 5 0, press the SBTL key.150 SBTL3. Select the PLU or PLUs you wish to program in one of the following ways:Press a PLU key on the keyboard, orPLUPress multiple PLU keys that are to receive the same status, orPLU PLU PLU PLUPress a level key, then an PLU key, orLEVEL1/2/3PLUEnter the number of the PLU (1-1000) and press the PLU key, orPLUEnter the number (1-1000) of the first PLU in a range of PLUs that are to receivethe same setting; press the PLU key. Enter the last number (1-1000) in the range;press the PLU key.PLUPLU4. Enter up to two 2-digit numbers representing the groups where you wish to add thePLUs sales, i.e. enter 1 0 for group ten or enter 0 4 for group four. Press the X/TIMEkey. Note that the 1 st group assignment will also determine kitchen printer routing.X/TIME1 st Group(for KP routing)2 nd Group5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize theprogram.CASHSAM4s ER-5115 Electronic Cash Register Programming 101