APT Power Assist Folding Electric Bicycle USER MANUAL - Shoprider

More documents

Recommendations

Info

Steps to restore the E-Bike12Remove the safety pin fromthe locking hole.Unfold the front & rear frameassembly as shown.3Coincide the locking holes and insert the safety pinto engage the front and rear frame assembly securely.4312Lower the lever by fingers as shown to retreat the pin for theengagement of the handle bar. Restore the handle bar and thenheighten the lever to engage pin and slot in, and then clamp thelever to secure the handle bar.Note: Move the cables away from the quick-clamp to preventaccidental scratch on cables while unfolding.2008/4/30 14
56Adjust the tighten knobto fasten the mudguard.Note: Follow the same stepswhile installing themudguard on a new unit.Pull the trigger of the pedal and unfoldthe pedal simultaneously. Repeat thesame steps on the other side of the pedal.7 8Install the saddle and adjustit to the desired height andthen tighten the clamp lever.Note: For your safety, do notset the saddle heightexceeding the bottom lineon the seat post.Refer to the instruction for MountingBattery Case to be mounted.9The unfolding steps are completed.2008/4/30 15
Page 1 and 2: APT ® Power Assist Folding Electri
Page 3 and 4: IntroductionThank you for purchasin
Page 5 and 6: User Guidance10 stages power assist
Page 7 and 8: Regular check for safety before rid
Page 9 and 10: Battery and ChargingSteps to charge
Page 11 and 12: Battery Case Features˙Main Switch
Page 13: 6 7Pull out the safety pin from the
Page 17 and 18: SpecificationModelSFB-18Length In 5

APT Power Assist Folding Electric Bicycle USER MANUAL - Shoprider

Create successful ePaper yourself

Delete template?

Save as template?