APT Power Assist Folding Electric Bicycle USER MANUAL - Shoprider

More documents

Recommendations

Info

Steps to fold the E-Bike1Refer to the instruction for Dismounting Battery Case toremove the battery case.2 3Loosen the clamp lever to remove the saddle.Note: Keep the battery case and the saddle ina safe place after removed from the E-Bike.4 5Lower the mudguard byloosening the tighten knob.Pull the trigger of the pedal and fold thepedal simultaneously. Repeat the samesteps for the other side of the pedal.2008/4/30 12
6 7Pull out the safety pin from thelocking hole.8Fold the front & rearframe assembly as shown.Insert the safety pin into thelocking holes to engage thefront and rear frame assembly.9 10Loosen and then lower the lever to retreat the pin to release the clampingof the handle bar. Keep the crank-pedals on the level while folding thehandle bar. Fold the handle bar downward toward the same side of thekickstand and beyond the level of crank-pedals.Note: Move the cables away from the quick-clamp to prevent accidentalScratch on cables while folding.11The folding steps are completed.2008/4/30 13
Page 1 and 2: APT ® Power Assist Folding Electri
Page 3 and 4: IntroductionThank you for purchasin
Page 5 and 6: User Guidance10 stages power assist
Page 7 and 8: Regular check for safety before rid
Page 9 and 10: Battery and ChargingSteps to charge
Page 11: Battery Case Features˙Main Switch
Page 15 and 16: 56Adjust the tighten knobto fasten
Page 17 and 18: SpecificationModelSFB-18Length In 5

APT Power Assist Folding Electric Bicycle USER MANUAL - Shoprider

Create successful ePaper yourself

Delete template?

Save as template?