Glassworking lathes 1080 H - Arnold Gruppe
Glassworking lathes 1080 H - Arnold Gruppe
Glassworking lathes 1080 H - Arnold Gruppe
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Glass / Quartz glass > <strong>Glassworking</strong> <strong>lathes</strong> > Benchtop models<strong>Glassworking</strong> <strong>lathes</strong> <strong>1080</strong> HUniversal glassworking <strong>lathes</strong>Item number: VD1-00058The guide, consisting of two hardened and ground bars, is mounted as a compoundsystem on the cast machine base. A closed stainless steel cover protectsthe wear-free guide against heat radiation, cullet, dust and dirt.The headstock is fixed and the tailstock can be moved on linear ball bushings viatoothed rack very sensitively by means of a handwheel. The same refers to the burnersupport.The spindle of the tailstock can be declutched, that means separated from drive bymeans of an electro clutch.The direction of rotation of the spindles can be changed by means of a switch. Theguide for the tailstock and the burner support can fixed mechanically.For easy opening and closing of the chucks, the lathe is equipped with anelectromagnetic brake. Upon switched-on brake the spindles block when stopping themachine. Upon start the brake releases automatically.Further Options:The machines are standardly offered with three-jaw ring chucks. On demand, alsoother clamping devices can come into operation, e.g. quick acting chucks or three-jawscroll chucks as well as vacuum clamping devices.Furthermore, machines can be equipped with automatic advance, burner gas supply,blast air device, burner equipment, forming tools up to fully automatic control viaindustrial- PC (<strong>Arnold</strong> Easy Panel System AEPS).Please contact us for more details.Standard accessories:- 1 piece Burner support- 1 piece Blowingswivel with holder- 1 piece Electromagnetic brake- 1 pieceElectromagnetic clutch for tailstock spindle- Clamping units for burner supportand tailstock- 1 set of toolsSpindle boreCentre height above burner support80 mm250 mmHerbert <strong>Arnold</strong> GmbH & Co. KG WeilburgAmtsgericht Limburg HRA-Nr. 2032 P.h.G.: H. u. W. <strong>Arnold</strong> GmbH WeilburgAmtsgericht Limburg HRB-Nr. 3071 Geschäftsführer: Dipl.-Ing. Wolfram <strong>Arnold</strong>AddressHerbert <strong>Arnold</strong> GmbH & Co. KGWeilstrasse 6D-35781 WeilburgTelephone: +49 (0) 64 71 93 94 -0Telefax: +49 (0) 64 71 20 65E-Mail: info@h-arnold.deWebsite: www.h-arnold.deAccording to specification:29.08.2011All rights reserved
Working length between spindle flangesWorking length between tips of jawsmax. Spindle speed, steplessly adjustable1250 mm960 mm150 1/minHerbert <strong>Arnold</strong> GmbH & Co. KG WeilburgAmtsgericht Limburg HRA-Nr. 2032 P.h.G.: H. u. W. <strong>Arnold</strong> GmbH WeilburgAmtsgericht Limburg HRB-Nr. 3071 Geschäftsführer: Dipl.-Ing. Wolfram <strong>Arnold</strong>AddressHerbert <strong>Arnold</strong> GmbH & Co. KGWeilstrasse 6D-35781 WeilburgTelephone: +49 (0) 64 71 93 94 -0Telefax: +49 (0) 64 71 20 65E-Mail: info@h-arnold.deWebsite: www.h-arnold.deAccording to specification:29.08.2011All rights reserved
Change language