Red Hat Enterprise Linux 5 Administration Unleashed

Installing with Kickstart 41. zfcpOn IBM System z systems, the zfcp driver can be used to support Fibre ChannelProtocol (FCP) devices. All zFCP devices must be configured manually (not automaticallyconfigured during installation). All of the following arguments are required.1--devnum=Specify the 16-bit device number.--fcplun=Specify the 64-bit FCP LUN.--scsiid=Specify the SCSI ID number.--scsilun=Specify the SCSI LUN.--wwpn=Specify the 64-bit World Wide Port Number (WWPN).. ignorediskIgnore the listed disks when partitioning, formatting, and clearing.--drives=[list]The list should be a comma-separated list of drive names.Additional Commands. deviceIf the installation program does not properly probe one or more PCI devices, usethis directive to configure them with the following required parameters:Either scsi or eth.Kernel module to use for the device.--opts=Kernel module options. To list more than one option, separate them by aspace and place all the options inside one set of quotation marks.