Red Hat Enterprise Linux 5 Administration Unleashed

38CHAPTER 1Installing Red Hat Enterprise Linux--fsoptions=Mounting options to use for the filesystem. They are copied to /etc/fstab.--bytes-per-inode=Size of inodes for the filesystem on the logical volume. Ignored if the filesystemspecified does not support this feature.--growAllow size of logical volume to increase if space is available. If a maximum size isprovided with --maxsize=, logical volume will not be bigger than this maximumsize.--maxsize=If --grow is used to allow the size of the logical volume to increase, this optionshould be set to the maximum size the logical volume is allowed to grow, inmegabytes.--recommendedLet the installation program automatically calculate the size of the logicalvolume depending on free space available.--percentSize of the logical volume as a percentage of the free space available.. partition (required for installs)Create a filesystem partition. Formatted by default unless --noformat and --onpartare specified. Only applicable to installations, not upgrades.The following options are available:Mount point for the partition. Valid formats for the mount point are as follows:Directory path such as /, /tmp, or /homeswap to specify a swap partitionraid. for software RAIDpv. for LVM--size=Minimum size for the partition, in megabytes.--growAllow size of partition to increase if space is available. If a maximum size isprovided with --maxsize=, logical volume will not be bigger than thismaximum size.