Libraries for Building Automation Function Block ... - Wago

Fan, 2-Level (FbFan_2Level)Fan, 2-Level (FbFan_2Level)WAGO-I/O-PRO Library ElementsCategory:Building AutomationName:FbFan_2LevelType: Function Function block X ProgramName of library:Building_HVAC_03.libApplicable to:See Release NoteInput parameters:Data type: Comment:xEnableSystem BOOL Fan control enabled by FbStartStopDefault setting = TRUExNightVentilation BOOL Switch on fan during night ventilationxEnableFan BOOL Switch on fanxContactorLevel1 BOOL Contactor monitoring via auxiliary contactlevel 1xContactorLevel2 BOOL Contactor monitoring via auxiliary contactlevel 2xSpeedLevel1 BOOL Speed level 1 in automatic modexSpeedLevel2 BOOL Speed level 2 in automatic modexManualOperation BOOL Enable manual operationxManualLevel1 BOOL Fan level 1 in manual modexManualLevel2 BOOL Fan level 2 in manual modexRepairSwitch BOOL Repair switchDefault setting = TRUExMotorProtection BOOL Motor protection switchDefault setting = TRUExV_Belt BOOL V-belt monitoring of the fanDefault setting = TRUEtypConfigFan Configuration parameters:.tOnDelay TIME Delay time of the fanDefault setting: t#0s.tStartUpPeriod TIME Startup time of the fanDefault setting: t#5s.tPressureVariation TIME Error message delay time duringpressure fluctuationsDefault setting: t#5s.tSwitchOverTime TIME "Idle time" of the fan, when switchingfrom level 2 to level 1.Default setting = t#2s.xAuxiliaryContact BOOL Auxiliary contact for contactor monitoringpresentDefault setting = FALSExQuit BOOL Error message acknowledgementInput/output parameters: Data type: Comment:dwOperatingMinutes DWORD Operating minutes of the fanSubject to design changes WAGO Kontakttechnik GmbH & Co. KG P:O. box 2880 • D-32385 Minden Phone: 05 71 / 8 87-0 E-Mail: info@wago.comCopyright © 2013 Hansastr. 27 • D-32423 Minden Fax.: +49 (0) 5 71 / 8 87-169 Web: http://www.wago.com42