solutions - Profilex sa

AUTOMATIC LAY-UPTechn. Data:• Fully automatic operationCycle time: < 15 sec/string (with 2 portals,without camera-inspection)Module sizes: from 500 x 1000up to 2.000 x 3000 mmRepeating accuracy: 0.5 mmCell-dimensions: min 6”, max 8”(others on request)Power-supply: 400 V, 50/60 Hz,Rated output: 6 kVAOptions:• In-process string inspection with cameras• Control of soldering-ribbons• Interface for data-management, bar-code reader,labelprinter• tTlediagnostic service• Connection with stringer• Manual soldering table• Connection to automatic soldering station

SEMI AUTOMATIC LAY-UPTechn. Data:• Semi automatic operationCycle time: < 40 sec/stringFor modules from 500 x 1200 up to700 x 1960 mm(others on request)Repeating accuracy: 0.5 mmCell-dimensions: min 4”, max 6”(others on request)Power-supply: 400 V, 50/60 HzRated output: 2 kVAOptions:• Automatic glass alignment• Interface for data-management, bar-code reader,labelprinter• Telediagnostic service• Connection with stringer• Transportation lines for assembled modules

HORIZONTAL FLASHERTechn. Data:• Output metering and classification of assembledmodules with connector boxSize: depending on flashing systemMax module sizes: 3000 x 3000 mmMin module sizes: 1200 x 550 mm(others on request)Options:• Automatic labelling• HV test• Framed modules/frameless modules• Automatic or manual loading of the modules• Automatic or manual contacting• Stand alone solution with PLC and interfacestandarizedContacting of modules: manual/automaticFlasher-System:Berger Lichttechnik / H.A.L.M. / Endeas / Pasan

VERTICAL FLASHERTechn. Data:• Output metering and classification of assembledmodules with connector boxSize: depending on flashing systemMax module sizes: 2000 x 1500 mmMin module sizes: 1200 x 550 mm(others on request)Contacting of modules: manual/automaticOptions:• Automatic labelling• HV test• Set upright station• Framed modules/frameless modules• Automatic or manual loading of the modules• Automatic or manual contacting• Stand alone solution with PLC and interfacestandarizedFlasher-System:Berger Lichttechnik / H.A.L.M. / Endeas / Pasan

MODULE-FRAMINGTechn. Data:• Assembling of module frame• PLC controlled• Manual or automaticModule sizes:Standard: 1500 x 1000; 800 x 600Oversize: 2000 x 1600; 1200 x 1000Options:• Corner key pre-assembly• Screwed frame• Different assembly flows• Two operator handling• Inline or stand alone• Automatic screwing• Sealing with tape or siliconeCycle time:90s - 180s/ module depending oncorner joint method, sealing andworkflow

TRIMMING STATIONTechn. Data:• Manual trimming of laminated modulesMax pane dimensions: 2000 x 1500 mmMin pane dimensions: 1000 x 500 mmMax weight :30 kgs• Laminated modules are fixed by vacuum onpneumatic lifted turntable• Manual cutting of supernatant foilOptions:• Integrated in automatic conveyor system•Ppneumatic pane stoppers• Also usable as cleanstation for assembled modules• Stand alone pneumatic controlled• PLC-controlled

MANUAL FLIPPINGTechn. Data:• Manual rotation of laminated modules or framemoduls with or without connector boxMax pane dimensions:Min pane dimensions:Max weight :2000 x 1500 mm800 x 500 mm60 kgsothers on request• The pane is fixed with pneumatic cylinders andvacuum while turning.

AUTOMATIC FLIPPINGTechn. Data:• Automatic rotating of laminated modules orframe moduls with or without connector boxMax pane sizes:Min pane sizes:Max pane weight:2000 x 1500 mm1000 x 500 mm60 kg

GLASS / MODULE BUFFER HD FIFOTechn. Data:• Inline buffering of glass panes or laminatedmodules without frames (with frames onrequest).Options:• FIFO-Software• buffer for framed modules• storing of glasseswith EVA-foilMax total load: 600 kgCapacity: max 20 panes (others on request)Max pane size:Min pane size:2000 x 1100 mm1000 x 600 mm

GLASS / MODULE BUFFER HD LIFOTechn. Data:• Inline buffering of glass panes or laminatedmodules without frames (with frames onrequest).Options:• LIFO-Software• buffer for framed modules• storing of glasseswith EVA-foilMax total load: 600 kgCapacity: max 20 panes (others on request)Max pane size:Min pane size:2000 x 1100 mm1000 x 600 mm

REPAIR TABLE FOR SOLAR MODULESDescription:• Repair of module sandwiches before lamination• Holders for soldering equipment• Holders for soldering fume exhaust system• Vacuum handling system for strings• Two stringboxes for new/reject strings• Transport trolley for handling of sandwich fromline to repair table• Luminaire and pneumatic and electrical connections

STRING REPAIR TABLEDescription:• String repair table to repair broken cells afterstring process• Holders for soldering equipment• Holders for soldering fume exhaust system• Vacuum handling to take string out of reject box• String flipping unit integrated• Light box for functional string testing after repair• Luminaire and pneumatic and electrical connections

VISUAL INSPECTIONDescription:• Visual inspection of panels after laminationOptions:• Automatic transport with toothed belt conveyor• Two hand operation

Inline module framing stationSOLUTIONS

SOLUTIONSConnection between manual and automatic transportation

Semi automatic assembly lineSOLUTIONS

SOLUTIONSAutomatic HV-test / isolation-testAlso available integrated in flasher.

Roller conveyor with mechanical accumulation protectionSOLUTIONS

SOLUTIONSFraming station (stand alone)

Automatic lift from horizontal to vertical transportSOLUTIONS

SOLUTIONSModul flasher with integrated HV-test/isolation test

2 axis handling system for transport/packingSOLUTIONS

SOLUTIONSVisual inspection quality controle

GmbH & Co. KGMiniTec Allee 1 · D-66901 Schönenberg-Kbg.Tel. +49(0) 63 73/8127-0Fax +49(0) 63 73/8127-20e-mail: info@minitec.deurl: www.minitec.deGmbH & Co KGFürther Str. 33 · D-90513 ZirndorfTel. +49(0) 911/27 89 00-0Fax +49(0) 911/27 89 00-99e-Mail: zirndorf@minitec.deurl: www.minitec.deS.N.C.2, rue Charles DesgrangesF-57214 SarregueminesTel. +33(0) 3 8727 6870Fax +33(0) 3 8727 6877e-mail: info@minitec.frurl: www.minitec.frUK Ltd.Unit 1 Telford Road · Houndmills Industrial EstadeGB-RG16YU Basingstoke/HampshireTel. +44(0) 1256 365 605Fax +44 (0) 1256 365 606e-Mail: info@minitec.co.ukurl: www.minitec.co.uk(Schweiz) AGIndustriestrasse 19 · CH-8112 OtelfingenTel. +41(0) 44 575 15 00Fax +41(0) 44 575 15 01e-mail: info@minitec.churl: www.minitec.chEspana S.L.U.C/ Carlos Jiménez Díaz, 7. Pol. Ind. La Garena28806 Alcalá de Henares, MadridTel. +34 91 656 26 52Fax +34 91 677 53 04e-mail: info@minitec.esurl: www.minitec.esSlovakia s.r.o.ul. Rabicicka 332 · 029 44 RABCATel. +421/ 43 552 435 - 0Fax +421/ 43 552 435 - 2e-mail: info@minitec-slovakia.skurl: www.minitec-slovakia.skSlowenia d.o.o.Grize 24a · 3302 GrizeTel. +386/ 59 071 390Fax +386/ 59 071 399e-mail: info@minitec.siurl: www.minitec.siImport Belgium & LuxembourgProfilex s.a.4A, Z.I. In den AllernL-9911 Troisviergeswww.profilex-systems.comTel: 00352/99 89 06Fax: 00352/26 95 73 73profilex@pt.luFraming Systems LLC100 Rawson Road, Suite 228Victor Business CentreVictor, NY 14564 - USATel. +1 585 924 4690Fax +1 585 924 4821e-mail: sales@minitecframing.comurl: www.minitecframing.com