FERMACELL Partition 1 H 22
FERMACELL Partition 1 H 22
FERMACELL Partition 1 H 22
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>FERMACELL</strong> <strong>Partition</strong>1 H <strong>22</strong>Fire Protection: F 60Sound Insulation: 44 dBDescription.<strong>FERMACELL</strong> is a high performance,multipurpose building board thatcombines in a single product exceptionalfire, impact and moisture resistantproperties with high levels of acousticinsulation and weight carrying capacity.The simple squeegee-applied FSTfinishing system eliminates plasteringtrades and dries in 30 minutes.Specification and Use.<strong>FERMACELL</strong> is a dense, homogenous,square edged board that is butt-jointedusing <strong>FERMACELL</strong> Jointstik adhesive.The board is fixed to timber studwork(PSE min 75 mm deep and with a 50 mmfixing face) using <strong>FERMACELL</strong> screwsor galvanised, resinated staples.The rigid nature of <strong>FERMACELL</strong>means that noggins are not usuallynecessary and that the board can beused for racking purposes.Full installation details are given inthe <strong>FERMACELL</strong> Handy Guide. NBSspecifications and Autocad drawingsare also available.Technical Data:Boarding each sideMineral Fibre Insulation<strong>FERMACELL</strong> board, 12.5 mm40 mm thick, 45 kg/m3Fire Protection (BS 476 Part <strong>22</strong>) F 60Sound InsulationThermal ResistanceCoefficient of Heat TransmissionWeight of WallR’ w 44 dB0.81 m2K/W0.75 W/m2Kapprox 38 kg/m2Weight carrying ability Ø 8 Wallplug 500 NØ 5 Screw300 N
<strong>FERMACELL</strong> <strong>Partition</strong> 1 H <strong>22</strong>Fire Protection: F 60Sound Insulation: 44 dB(6) (5) (1) (3) (8)(2)(7) PlanDetail drawings(1) <strong>FERMACELL</strong> Gypsum-Fibreboard 12.5 mm(2) <strong>FERMACELL</strong> Jointstik adhesive(3) Vertical timber stud, 75 mm or 100 mm deep,50 mm fixing face(4) Head and Floor track, 75 mm or 100 mm deep,50 mm fixing face(5) Mineral Fibre batts, 40 mm, 45 kg/m3(6) Isolation strip(7) Flexible mastic or <strong>FERMACELL</strong> Joint Fillerwith separation tape(8) <strong>FERMACELL</strong> Screws, 3.9 mm x 30 mm orgalvanised resinated staples(9) Frame anchor(6)(7)(4)(1)(1)(5)(3)(3)(4)(9)ElevationJunction between two<strong>FERMACELL</strong> partitionsCorner JunctionMaximum wall height (metres):Stud depth (mm) Stud centres (mm) Wall height (mm)75 600 3.00100 600 4.00A <strong>FERMACELL</strong> 1 H <strong>22</strong> partition is F 60 rated up to 4.0 m high, depending on stud specification.For the maximum wall height, see table. These ratings are based on severe usage.Other construction details and technical information sheets are available from XELLA.This publication contains detailed instructions for the correct installation of<strong>FERMACELL</strong> partitions.We reserve the right to make changes in the interest of technical improvement.All information correct as at 08.03Xella Dry Lining SystemsP.O. Box 10028Sutton Coldfield B72 1WGTelephone: 0870-6090306Telefax: 0870-2402948www.fermacell.co.uk
Change language