Benutzerhandbuch CONVISION CC-84xx Serie
Benutzerhandbuch CONVISION CC-84xx Serie Benutzerhandbuch CONVISION CC-84xx Serie
NOTE: Configuration changes in the Setup interface require clicking the SAVE button. Otherwise,changes will not be applied.The following discusses the different basic configuration options within the Settings page.2.1 System – InformationThe Information page is always the initial page displayed when switching to the Setup view. Basicinformation related to the IP camera is displayed here.The page only displays information; no changes can be made here.2.2 System – Generic SettingCamera NameCONVISION CC-8*** Cameras User Manual 7
Enter a camera name if a specific name is desired.System Time3 options are available:Manual: insert time manuallyPC Time: set to the current PC timeNetwork Time Server: periodically synchronizes with a time serverFor Network Time Server two standard options are provided. If another time server is preferred,then choose others from the list and add the address of the time server which will be used.Renew Period specifies the synchronization schedule.Digital InputThis defines the method by which the digital in sensor operates. If the normal condition is open(N.O.), then the alarm will be triggered when the circuit is closed. The opposite applies for N.C.LEDThe camera LED lights can be enabled or disabled.CONVISION CC-8*** Cameras User Manual 8
- Page 1 and 2: BenutzerhandbuchCONVISIONCC-84xx Se
- Page 3 and 4: Teil 1InstallationshandbuchMegapixe
- Page 5 and 6: WarnungDie Kamera muss regelmäßig
- Page 7 and 8: 1 Installation von IP-Scan auf eine
- Page 9 and 10: 9. Schrauben Sie die hintere Abdeck
- Page 11 and 12: 4 Zugriff auf die IP-Kamera über d
- Page 13 and 14: Teil 2CONVISION CC-8xxxCameras User
- Page 15 and 16: Contents1 INTRODUCTION 02 The live
- Page 17 and 18: 1 INTRODUCTIONThis guide is for the
- Page 19 and 20: The right hand panel (Information,
- Page 21 and 22: To magnify a specific area, place t
- Page 23: 2 SETUPThe web interface is made up
- Page 27 and 28: To edit or delete an account, highl
- Page 29 and 30: Scroll down and find one of the Act
- Page 31 and 32: 2.5 System - Local StorageFormat wi
- Page 33 and 34: The port settings all relate to cam
- Page 35 and 36: Resolution Mode (5 MP Models Only)F
- Page 37 and 38: Select the desired audio codec. The
- Page 39 and 40: 2.14 Event Handle - Event ServerThe
- Page 41 and 42: The System Log has information spec
- Page 43 and 44: AuthenticationIf Streaming authenti
- Page 45 and 46: The camera can be configured with m
Enter a camera name if a specific name is desired.System Time3 options are available:Manual: insert time manuallyPC Time: set to the current PC timeNetwork Time Server: periodically synchronizes with a time serverFor Network Time Server two standard options are provided. If another time server is preferred,then choose others from the list and add the address of the time server which will be used.Renew Period specifies the synchronization schedule.Digital InputThis defines the method by which the digital in sensor operates. If the normal condition is open(N.O.), then the alarm will be triggered when the circuit is closed. The opposite applies for N.C.LEDThe camera LED lights can be enabled or disabled.<strong>CONVISION</strong> <strong>CC</strong>-8*** Cameras User Manual 8