2001 Cadillac Catera Owners Manual - Files
2001 Cadillac Catera Owners Manual - Files 2001 Cadillac Catera Owners Manual - Files
Power Seats (If Equipped)The power seat controls are located on the outboard sideof each front seat cushion.Move the front of the control up or down to adjustthe front portion of the cushion up or down.Move the rear of the control up or down to adjustthe rear portion of the cushion up or down.To adjust the seat height, lift up or push down onthe center of the control.To move the seat forward or rearward, slide thecontrol in the desired direction.If a failure in the power supply system occurs, the powerseats can be manually adjusted by inserting the crankhandle into the slot located below the seat cushion(as shown in the above illustration).The crank handle is provided in the tool kit located inthe trunk (with the jack).Turn the crank handle clockwise until you’ve reachedyour desired seating position (manually moving the seatrequires turning the crank handle many times).1-4
Memory Seat and Mirrors (If Equipped)After adjusting the driver’s seat to a comfortable position,also adjust the interior and exterior mirrors. To programthe memory seat and mirrors, press memory button “M”and memory button “1” at the same time and hold forfive seconds.These buttons are located on the outboard side ofthe driver’s seat. Seat and mirror positions may beprogrammed for two additional drivers by repeatingthe above steps and pressing memory button “2”or “3” instead of memory button “1.”If your vehicle is in PARK (P), you can recall mirror andseating positions by pressing and holding one of thethree memory buttons. This will adjust the seat andmirrors to where you have previously programmedthem. Seat and mirror movement is immediately stoppedif the memory button is released or if a seat or mirrorcontrol is moved.If you try to adjust the driver’s memory seat and itdoesn’t move, try opening the driver’s door. Thiswill reactivate power to the driver’s seat. (Power tothe driver’s seat “times out” after 30 seconds.Power to the passenger’s seat is always present.)1-5
- Page 2 and 3: Every2001 Cateraunder warranty isba
- Page 4 and 5: Table of ContentsSection 1Seats and
- Page 6 and 7: Table of Contents (cont'd)Section 6
- Page 8 and 9: We support voluntarytechnician cert
- Page 10 and 11: Vehicle Damage WarningsAlso, in thi
- Page 12 and 13: Service Station GuideFora MoreDetai
- Page 14 and 15: Seats and Seat ControlsThis section
- Page 18 and 19: Heated Front Seats (Option)The cont
- Page 20 and 21: Head RestraintsRemovable Head Restr
- Page 22 and 23: Rear SeatsCAUTION:A safety belt tha
- Page 24 and 25: Heated Rear Seat (Option)The heated
- Page 26 and 27: In most states and Canadian provinc
- Page 28 and 29: The person keeps going until stoppe
- Page 30 and 31: Q: If I’m a good driver, and I ne
- Page 32 and 33: Shoulder Belt Height AdjusterBefore
- Page 34 and 35: Q: What’s wrong with this?CAUTION
- Page 36 and 37: Q: What’s wrong with this?CAUTION
- Page 38 and 39: The best way to protect the fetus i
- Page 40 and 41: CAUTION:Both frontal and side impac
- Page 42 and 43: CAUTION:If something is between an
- Page 44 and 45: How does an air bag restrain?In mod
- Page 46 and 47: Servicing Your Air Bag-Equipped Veh
- Page 48 and 49: 2. Push the latch plate into the bu
- Page 50 and 51: ChildrenEveryone in a vehicle needs
- Page 52 and 53: CAUTION:Children who are up against
- Page 54 and 55: Restraint Systems for ChildrenAn in
- Page 56 and 57: Q: How do child restraints work?A:
- Page 58 and 59: In Canada, the law requires that fo
- Page 60 and 61: 4. Pull the rest of the shoulder be
- Page 62 and 63: 4. Buckle the belt. Make sure the r
- Page 64 and 65: Older ChildrenQ: What is the proper
Power Seats (If Equipped)The power seat controls are located on the outboard sideof each front seat cushion.Move the front of the control up or down to adjustthe front portion of the cushion up or down.Move the rear of the control up or down to adjustthe rear portion of the cushion up or down.To adjust the seat height, lift up or push down onthe center of the control.To move the seat forward or rearward, slide thecontrol in the desired direction.If a failure in the power supply system occurs, the powerseats can be manually adjusted by inserting the crankhandle into the slot located below the seat cushion(as shown in the above illustration).The crank handle is provided in the tool kit located inthe trunk (with the jack).Turn the crank handle clockwise until you’ve reachedyour desired seating position (manually moving the seatrequires turning the crank handle many times).1-4
Change language