specifications - FAACO - Federal Aviation Administration Contract ...

01010 SUMMARY OF WORKFTWIC-2235June, 2009.PART 1.00GENERAL1.01 WORK INCLUDED:A. These specifications, along with the accompanying drawings, describe the requirementsfor the restoration of the existing Houma Terrebonne Airport Traffic Control Tower(ATCT) and Base Building.BASE BIDModifications to the existing tower and base building include, but are not limited tomoving/storage of furniture, painting, carpet replacement, replacement of acousticceilings and vinyl tiles, replacement of light fixtures and other ceiling appurtenances.Redo the case and reseal the windows in the following offices: Air Traffic Manager,Automation Technology Services, Conference/Training and Air Force office. Replace theexterior door in the Air Force Work Room. Replace the Main Entrance door. Replace allthe sealing and weather stripping of all exterior doors and windows, Replace hardware ofall exterior doors and add ADA compliant handles, replace hinges with screw lockinghinges to comply with FAA security regulations, Sand blast and paint exterior door,Remove caulked joints, sealants and reseal the entire Tower shaft and Base Building.Replace the toilet in the men’s bathroom. Install angle iron member at the bottom of thelower A/C unit similar to unit above. Replace the weather hood of the exhaust fan in theelectrical room. Replace the bird screen of the ventilation Air Intake Louver in theelectrical room. Pour concrete apron as shown on drawing.Replace the existing Main Distribution Panel. Install a new main utility servicedisconnect switch and Hubbell Connector for the existing engine generator.ADD OPTION # 1Interior and Exterior paint on the Tower Shaft and Base Building.B. Contractor shall furnish all plant, labor, equipment and material, supplies andtransportation required to perform the work in strict accordance with the drawings andspecifications.C. The construction site is located at 10264 E Main St., Houma Terrebonne Airport, Houma,Louisiana. This is an active and operational facility. The Contractor shall comply withall procedures, rules and regulations of the airport and FAA.D. This work shall be accomplished using Specification FTWIC-2235 and the projectdrawings.E. The FAA may declare various moratoria which may prohibit parts of the constructionwork that might affect or pose a risk to the operational air-traffic control functions of this01010-1