specifications - FAACO - Federal Aviation Administration Contract ...

E. AS-BUILT DRAWINGS:FTWIC-2235June, 20091. On a sepia print, mark exact location of underground utilities, measured from apermanent reference point. Also note depth of utility at the building as well as atthe connection to the main.2. Note exact location of hidden valves or control equipment. Note any changes inequipment locations that occurred during construction.F. MAINTENANCE INSTRUCTIONS:Complete a typewritten "Maintenance Instruction Form" which describes the cleaningprocedures necessary for each type of finished surface. Description to list suggestedcleaning products, waxes, or other products on the following materials:Resilient TileAcoustical TilePaintVinyl Wall FabricCeramic or Quarry TileCarpetG. PREVENTIVE MAINTENANCE:Include the following information for preventive and scheduled maintenance to minimizecorrective maintenance and repair.1. LUBRICATION DATA:Include lubrication data as follows:a) A table showing recommended lubricants for specific temperature rangesand applications.b) Charts with a schematic diagram of the equipment showing lubricationpoints, recommended types and grades of lubricants, and capacities.c) A lubrication schedule showing service interval frequency.2. PREVENTIVE MAINTENANCE PLAN AND SCHEDULE:Include manufacturer's schedule for routine preventive maintenance, inspections,tests and adjustments required to ensure proper and economical operation and tominimize corrective maintenance and repair. Provide manufacturer's projectionof preventive maintenance work-hours on a daily, weekly, monthly, and annualbasis including craft requirements by type of craft. For periodic calibrations,provide manufacturer's specified frequency and procedures for each separateoperation.H. CORRECTIVE MAINTENANCE:Include manufacturer's recommendations on procedures and instructions for correctingproblems and making repairs.1. TROUBLESHOOTING GUIDES AND DIAGNOSTIC TECHNIQUES:01730-5