specifications - FAACO - Federal Aviation Administration Contract ...

7. ENVIRONMENTAL CONDITIONS:FTWIC-2235June, 2009Include a list of environmental conditions (temperature, humidity, and otherrelevant data) which are best suited for each product or piece of equipment anddescribe conditions under which equipment should not be allowed to run.B. PARTS LIST AND DESCRIPTIVE DATA:1. Furnish wiring diagrams, packing lists, installation instructions, and other printedinformation furnished by the manufacturer. Major items shall have a printedparts list included. Include any information specified in the various sections ofthe specifications.2. Include one complete set of approved Submittals for the following items:Light FixturesHVAC EquipmentWater HeatersSwitchgear & Panel boardsPumpsPlumbing FixturesHardware3. Furnish manufacturer's printed parts list or descriptive data for the followingitems:HVAC EquipmentAppliancesElevatorExhaust FansAir Handling EquipmentC. WARRANTIES AND GUARANTEES:Furnish manufacturer's printed warranties and Contractor's typewritten guarantee, alongwith other guarantees specified in the various sections of the specifications. List andexplain the various warranties and include the servicing and technical precautionsprescribed by the manufacturers or contract documents to keep warranties in force.Include warranty information for primary components such as the compressor of airconditioning system.D. IDENTIFICATION LEGENDS:1. Furnish a typewritten legend to correspond with identification devices installedon piping and equipment. Refer to Section 01080 IDENTIFICATIONSYSTEMS. Legend is to list the identifying device, its location, a briefdescription of the devices function, and the I.D. number.2. Include a typewritten electrical panel board legend for each panel board andswitchboard installed in the project. This information shall be a duplicate of thelegend placed in the panel board.01730-4