specifications - FAACO - Federal Aviation Administration Contract ...

FTWIC-2235June, 2009.d) Sample of Linear Devices or Materials: 10 inch length or length to besupplied, if less than 10 inches. Examples of linear devices or materialsare conduit and handrails.e) Sample of Non-Solid Materials: Pint. Examples of non-solid materialsare sand and paint.f) Color Selection Samples: 2 inches by 4 inches.g) Sample Panel: 4 by 4 feet.h) Sample Installation: 100 square feet.2. Samples Showing Range of Variation: Where variations are unavoidable due tothe nature of the materials, submit sets of samples of not less than three unitsshowing the extremes and middle of the range.3. Reusable Samples: Incorporate returned samples into the work only if sospecified or indicated. Incorporated samples shall be in undamaged condition atthe time of use.4. Recording of Sample Installation: Note and preserve the notation of the areaconstituting the sample installation but remove the notation at the final clean upof the project.5. When a color, texture or pattern is specified in naming a particular manufacturerand style, include one sample of that manufacturer and style, for comparison.F. FORMAT OF ADMINISTRATIVE SUBMITTALS:1. When the submittal includes a document which is to be used in the project orbecome a part of the project record, other than as a submittal, do not apply theContractor's approval stamp to the document, but to a separate sheetaccompanying the document.2. Operation and Maintenance Manual Data: Submit in accordance with Section01781, "Operation and Maintenance Data." Include components required in thatsection and the various technical sections.PART 2.00PRODUCTS (Not Applicable)PART 3.00EXECUTION3.01 GENERAL:The Contractor shall make submittals as required by the specifications. The Contracting Officermay request submittals in addition to those specified when deemed necessary to adequately01300-8