specifications - FAACO - Federal Aviation Administration Contract ...

16190 SUPPORTING DEVICESFTWIC-2235June 2009PART 1.00GENERAL1.01 WORK INCLUDED:Furnish labor, materials, equipment and incidentals necessary to install supporting devices.Electrical work shall be in accordance with Section 16010, GENERAL REQUIREMENTS FORELECTRICAL WORK.1.02 RELATED WORK COVERED ELSEWHERE:Cast-in-Place Concrete Section 03300General Requirements for Electrical Work Section 16010Disconnects Section 16170Panelboards Section 164701.03 QUALITY ASSURANCE:Support systems shall be adequate for the weight of equipment and conduit, including wiring,which they carry. Acceptable manufacturers shall be firms regularly engaged in the design,manufacture, and testing of manholes for electrical use and shall have been producing suchproducts for at least five (5) years.1.04 SUBMITTALS:Submittals shall be in accordance with Section 01300, SUBMITTALS and shall includemanufacturer's data: Submit manufacturer's specifications and catalog cuts for products to beused.1.05 STANDARDS:Refer to Section 16010, GENERAL REQUIREMENTS FOR ELECTRICAL WORK, for allstandards which apply to this section.PART 2.00PRODUCTS2.01 MANUFACTURED PRODUCTS:Unistrut brand part numbers are given for example only. equivalent manufacturer’s brands my besubstituted.A. CONTINUOUS SLOTTED CHANNEL:Dimensions as required for loads imposed.B. HANGER RODS:Continuous thread, galvanized, steel, sizes required are for loads imposed.16190-1