specifications - FAACO - Federal Aviation Administration Contract ...

PART 3.00EXECUTIONFTWIC-2235June 20093.01 INSTALLATION:A. Install fuses in switches as indicated on the plans. Install fuses on the line side of ballastcontrolledlight fixtures when indicated. The fuses shall be sized by the fixtureManufacturer.B. Unless otherwise indicated, mount the protective devices with the top of the cabinet orenclosure at a maximum of 6'-6" above the finished floor. Properly align the protectivedevices and adequately support them independently of the connecting raceways. Furnishand install all components necessary for the support of the equipment when the buildingis not suitable for direct mounting upon it.C. Install overcurrent devices in accordance with the National Electrical Code.END OF SECTION16180-2