specifications - FAACO - Federal Aviation Administration Contract ...

16163 DISTRIBUTION PANELBOARDSFTWIC-2235June 2009PART 1.00GENERAL1.01 WORK INCLUDED:Furnish labor, materials, equipment and incidentals necessary to install distributions panelboardsMDPEH and DPCL.1.02 RELATED WORK COVERED ELSEWHERE:General Requirement for Electrical Work Section 16010Motor Control Centers Section 164801.03 QUALITY ASSURANCE:Acceptable manufacturers shall be firms regularly engaged in the design, manufacture, andtesting of electrical distribution panelboards and shall have been producing such products for atleast five (5) years.1.04 SUBMITTALS:Submittals shall be in accordance with Section 01300, SUBMITTALS and shall include:A. Complete rating, nameplate legends.B. Size and number of bus bars and ground.C. Overall outline dimensions including the space available for conduit.D. Circuit schedule indicating the circuit number.E. Device description.F. Instructions for handling and installation of the panelboard.G. Electrical characteristics including voltage, frame size and trip ratings, withstand ratings,and time-current curves of all equipment and components.1.05 STANDARDS:Refer to Section 16010, GENERAL REQUIREMENTS FOR ELECTRICAL WORK, for allstandards which apply to this section.1.06 JOB CONDITIONS:Fusible and circuit breaker type panelboards shall be listed by the Underwriters Laboratories andbear the UL label.16163-1