specifications - FAACO - Federal Aviation Administration Contract ...

01300 SUBMITTALSFTWIC-2235June, 2009.1.01 WORK INCLUDED:Furnish submittals as required by the individual sections of the specifications in accordance withthis Section.1.02 QUALITY ASSURANCE:A. Submittals, including shop drawings, are the Contractor's sole responsibility. Carefullyexamine submittals to ascertain that all provisions of the specifications have beencomplied with.B. Submit descriptive data, certificates, performance data, test results and other informationnecessary to ascertain the quality of the component and its suitability for the purposeintended. The Contractor shall make, without cost to the Government, any change oradjustment in correcting work resulting from the use of such optional material orconstruction in conformity with the contract requirements.1.03 SUBMITTALS:A. Submittals shall adhere to the procedures outlined herein. Submittals must be completeor they will be returned without review. Do not submit partial or incomplete information.Shop drawings are drawings, submitted to the Government by the Contractor, showing indetail (1) the proposed fabrication and assembly of structural elements, and (2) theinstallation (i.e., fit, and attachment details) of materials or equipment. It includesdrawings, diagrams, layouts, schematics, descriptive literature, illustrations, schedules,performance and test data, and similar materials furnished by the Contractor to explain indetail specific portions of the work required by the contract. The Government mayduplicate, use, and disclose in any manner and for any purpose shop drawings deliveredunder this contract.B. Submittals shall be accompanied by an original and one copy of transmittal letter whichidentifies the content of the submittals.C. The Contractor shall submit a minimum of eight (8) sets of shop drawings and/orbrochures, or other submittals, or preferably two (2) sets of blueline prints and one (1) setof reproducible sepias in lieu of the eight (8) sets of bluelines. Two (2) sets of shopdrawings will be returned to the Contractor.D. Submit color charts for every item requiring color, texture or finish selection. Colorcharts and samples shall be submitted at one time. No color will be selected until allmaterial selections are submitted. Contractor shall review the drawings andspecifications, ascertain items that require color selection and submit data not less thanwithin thirty (30) days prior to first need. Subsequent to receipt of color samples theContracting Officer will select colors, and issue color selections for all products.E. Contractor shall submit material safety data sheets (MSDS) for all materials andequipment submitted. Contractor shall include a copy of the MSDS for O & M Manualsreferenced in Section 01730.F. Contractor shall submit asbestos certification letters for all materials. Contractor shallinclude a copy of the letters in the O&M Manuals.01300-1