specifications - FAACO - Federal Aviation Administration Contract ...

16140 WIRING DEVICESFTWIC-2235June 2009PART 1.00GENERAL1.01 WORK INCLUDED:Furnish labor, materials, equipment and incidentals necessary to install wiring devices.1.02 RELATED WORK COVERED ELSEWHERE:General Requirements for Electrical Work Section 16010Outlet Boxes Section 161301.03 QUALITY ASSURANCE:The manufacturer shall be a company specializing in manufacturing products specified in thisSection with a minimum of five (5) years experience.1.04 SUBMITTALS:Submittals shall be in accordance with Section 01300, SUBMITTALS and shall include:Provide manufacturer's catalog information showing dimensions, colors, configurations, andspecifications.1.05 STANDARDS:Refer to Section 16010, GENERAL REQUIREMENTS FOR ELECTRICAL WORK, for allstandards which apply to this section.PART 2.00PRODUCTS2.01 MANUFACTURED PRODUCTS:A. WALL SWITCHES:Specification grade, 20 ampere, 120/277 volts, totally enclosed toggle type with bodies ofphenolic compound. Handles shall be brown. Wiring terminals shall be of the screwtype. Not more than one switch shall be installed in a single-gang position. Switchesshall be the quiet operating type. The switches shall be for use on alternating currentonly. Pilot lights indicated on the Drawings shall consist of yoke-mounted candelabrabasesockets rated at 7.5 watts, 125 volts, and fitted with glass of plastic jewels. A clear6-watt lamp shall be furnished and installed in each pilot switch. Jewels for use withswitches controlling motors shall be green, and jewels for other purposes shall be red.Low voltage light switches shall match the specified switches.B. RECEPTACLES (SPECIFICATION GRADE):1. Single and Duplex Receptacles: Single and duplex receptacles shall be two-pole,three-wire grounding type, with polarized parallel slots. Receptacles shall be16140-1