specifications - FAACO - Federal Aviation Administration Contract ...

16130 OUTLET BOXESFTWIC-2235June 2009PART 1.00GENERAL1.01 WORK INCLUDEDFurnish labor, materials, equipment and incidentals necessary to install outlet boxes.1.02 RELATED WORK COVERED ELSEWHERE:Firestopping Section 07270Access Doors Section 08305General Requirements for Electrical Work Section 16010Wiring Devices Section 16140Fire Detection and Alarm Section 16721Security Access System Section 16722Closed Circuit Television System Section 167821.03 QUALITY ASSURANCE: [Not Used]1.04 SUBMITTALS:Submittals shall be in accordance with Section 01300, SUBMITTALS and shall includemanufacturer's data: Submit copies of manufacturer's specifications and catalog cuts for productsto be used.1.05 STANDARDS:Refer to Section 16010, GENERAL REQUIREMENTS FOR ELECTRICAL WORK for allstandards which apply to this section.PART 2.00PRODUCTS2.01 MANUFACTURED PRODUCTS:A. GENERAL:Provide boxes with plaster ring where required. Boxes for installation in masonry wallsshall be special square corner masonry type. Furnish boxes with proper covers anddevice plates. Non-metallic boxes may be used only with non-metallic raceway systems.Each box shall have the volume required by the NEC for the number and size ofconductors in the box. Each outlet box shall have a machine screw which fits into atapped hole in the box for the ground connection. Boxes for mounting lighting fixturesshall be not less than four inches square.B. SHEET METAL BOXES:ANSI/NEMA OS 1; galvanized steel, with 1/2" inch male fixture studs where required.16130-1