specifications - FAACO - Federal Aviation Administration Contract ...

01041 JOB MANAGEMENTFTWIC-2235June, 2009PART 1.00GENERAL1.01 WORK INCLUDED:Perform the administrative job related requirements necessary for the proper conduct of the workas indicated in this section and to comply with the General Conditions.1.02 RELATED WORK COVERED ELSEWHERE:Project Administration Section 01040Submittals Section 01300Quality Control Section 01400Temporary Facilities Section 01510Contract Closeout Section 017001.03 POLLUTION CONTROL:A. Take necessary precautions to prevent contamination of soil or atmosphere by thedischarge of noxious substances resulting from construction operations. Provideequipment and personnel and perform emergency measures necessary to contain anyspillage.B. If contamination of the soil does occur, excavate contaminated soil and dispose of at anoff-site location. Fill resulting excavations with suitable backfill and compact to thedensity of the surrounding undisturbed soil.C. Take measures to prevent dispersal of pollutants into the atmosphere. Do not dump orotherwise discharge obnoxious or harmful fluids into drains or sewers.PART 2.00PRODUCTS2.01 MATERIALS:Materials shall be in accordance with the requirements of the individual sections.2.02 AS-BUILT DRAWINGS:A. The Contractor shall update two full size sets of construction drawings on a weekly basisas construction progresses. The two sets of drawings shall be maintained and updated inthe Contractor’s office on site. The Contractor shall update a third full size set ofconstruction drawings (FAA’s record set of drawings) by copying the updates made tothe Contractor’s drawings onto a set of drawings maintained in the FAA’s ResidentEngineer’s office. All drawing sets shall be updated with a red drafting pencil andstraight edge. All notes, drawings and deletions shall be redlined to accurately reflectactual construction including but not limited to change orders, clarifications and equals.Redlines shall be of drafting quality and intent clearly legible.B. The Contractor shall clearly indicate the manufacturer and model number of itemsinstalled on the as-built drawings. Control schematics, color coding of control wiring,01041-1