specifications - FAACO - Federal Aviation Administration Contract ...

K. TOWEL DISPENSER / WASTE RECEPTACLE:FTWIC-2235June, 2009Recessed 22 guage or heavier type 304 stainless steel with no. 4 finish, 4” depth.Bradley model 2291 or approved equal.L. STAINLESS STEEL WASTE RECEPTACLES:22 gauge stainless steel with satin finish on exposed surfaces, equipped with vinylbumper strip and rubber feet. Bobrick model B-2250 or approved equal.M. STAINLESS STEEL FRAMED MIRRORS:2.02 FASTENINGS:One-piece roll formed frame 3/4” x 3/4”, type 304 stainless steel angle with satin finish.No. 1 quality 1/4” plate glass mirror electrolytically copper plated with back protected by3/16” thick water-resistant, shock absorbing polyethylene padding on 20 gaugegalvanized steel back attached to frame with concealed screws. Secure to concealed wallhanger by two theft resistant locking screws, 24” x 36” and 48” x 36” sizes. Bobrickwashroom accessories model B-290 series or approved equal.A. Furnishing mounting devices and fastenings with each accessory of type and quantityrequired by mounting conditions.B. Fastenings shall be non-ferrous, galvanized or chrome-plated. Visible fastenings shall bechrome-plated and theft-proof type.PART 3.00EXECUTION3.01 PREPARATION:Provide wood blocking in drywall partitions as necessary to mount and anchor accessories.3.02 INSTALLATION:A. GENERAL:1. Provide and install accessories using the appropriate fasteners, such as expansionbolts, screws, toggle bolts, or expansion schedule, as necessary. Exposedfasteners shall be a similar finish as the attached item. Install toilet accessorieswith tamper-proof fastening on all exposed fasteners.2. Fasten each accessory rigidly in place, in perfect plumb, level and alignment.Where an accessory is mounted on or in a surface having joint pattern, mount itsymmetrically within the pattern wherever possible.B. MOUNTING HEIGHTS:Mounting height shall be in accordance with ADA requirements.10805-4