specifications - FAACO - Federal Aviation Administration Contract ...

More documents

Recommendations

Info

10805 TOILET ACCESSORIESFTWIC-2235June, 2009PART 1.00GENERAL1.01 WORK INCLUDED:Furnish labor and materials necessary to install toilet accessories, indicated on the drawings orand scheduled herein. Furnish fasteners and accessories required by the type of construction towhich they are connected. The hardware finish shall match the accessory finish.1.02 RELATED WORK COVERED ELSEWHERE:Wood Blocking Section 06101Drywall Construction Section 09260Toilet Partitions Section 101621.03 QUALITY ASSURANCE: [Not Used]1.04 SUBMITTALS:Submittals shall be in accordance with Section 01300, SUBMITTALS and shall include productdata sheets and a schedule which lists every accessory identified by the location which it is to beinstalled.1.05 REFERENCES AND STANDARDS:The applicable provisions of the following references and standards are hereby made a part of thisSection as if written herein in its entirety:Aluminum Association (AA) publications:"Designation System for Aluminum Finishes"1.06 DELIVERY AND STORAGE:Deliver products in protective cartons. Retain the products inside the cartons until used. Store ina storage shed or building.1.07 JOB CONDITIONS:A. Prepare and submit schedule with quantities, using the following schedule as a guide orreferral only; not a quantity takeoff. The <strong>Contract</strong>or shall be responsible for the accuracyof quantities.B. The Owner reserves the right to change from folding paper towel to roll type, and fromliquid or lather soap to a commercial product which includes a dispenser. Prior toordering toilet accessories, verify the type of toilet paper dispenser to be used.C. Each accessory item shall be complete with the necessary mounting plates, anchors, andfasteners. Concealed mounting plates shall be of sturdy construction and may beunpolished or unplated.10805-1
FTWIC-2235June, 2009PART 2.00PRODUCTS2.01 MANUFACTURED PRODUCTS:A. ROLL TISSUE HOLDER/SURFACE MOUNT:1. Polished chrome-plated die cast zinc with push button release, designed to hold 2rolls. Bradley Corp. - Washroom Accessories Division Model 522 or approvedequal.2. Theft-resistant, heavy duty, one-piece molded polyethylene spindles have 1/8”wall thickness. Unit type 304 stainless steel, satin finish tumbler lock on door.Bobrick washroom accessories model B-288 or approved equal.B. FRAMED MIRROR WITH SHELF:1. Type 304 stainless steel 20 gauge or heavier shelf and 18 gauge or heavier angleframe with mitered, welded corners. Mirror silvered on 1/4 inch CS 27-36 No. 1quality plate glass, electro-copper backed and pained, with 22 gauge or heaviergalvanized steel back plate. Mount with theftproof device 24 x 30 inch sizeunless shown otherwise. Bradley Corp. - Washroom Accessories Division Model7805 or approved equal.2. One-piece roll formed frame 3/4” x 3/4”, type 304 stainless steel angle with satinfinish furnished with one piece, type 304 satin-finish stainless steel shelf. No. 1quality 1/4” plate glass mirror electrolytically copper plated with back protectedby 3/16” thick water-resistant, shock absorbing polyethylene padding on 20gauge galvanized steel back attached to frame with concealed screws. Secure toconcealed wall hanger by two theft resistant locking screws, 24” x 30” size.Bobrick washroom accessories model B-292 series or approved equal.C. SOAP DISPENSER/WALL MOUNTED:Powdered soap dispenser - 18-8, type 304, 20 gauge stainless steel with satinfinish, one piece seamless construction. Back is 22 gauge stainless steel with 20gauge stainless steel mounting bracket. Equipped with stainless steel soapagitator. Bobrick model B-132 or approved equal.D. SOAP DISPENSER/LAVATORY MOUNTED:Liquid soap dispenser with 4-inch spout of bright polished Type 304 stainlesssteel and 32-ounce capacity polyethylene container, theftproof mounting.Bradley Corp. 6324-68 or approved equal.10805-2
Page 1 and 2:
FTWIC-2235June, 2009U.S. Department
Page 3 and 4:
TABLE OF CONTENTSFTWIC-2235June 200
Page 5 and 6:
THIS PAGE INTENTIONALLY BLANK
Page 7 and 8:
FTWIC-2235June, 2009.facility on da
Page 9 and 10:
THIS PAGE IS INTENTIONALLY BLANK
Page 11 and 12:
FTWIC-2235June, 2009G. Since portio
Page 14 and 15:
01040 PROJECT ADMINISTRATIONFTWIC-2
Page 16 and 17:
FTWIC-2235June, 20093.02 MATERIALS
Page 18 and 19:
01041 JOB MANAGEMENTFTWIC-2235June,
Page 20 and 21:
3.05 MAINTENANCE OF WATER:FTWIC-223
Page 22 and 23:
Page 24 and 25:
FTWIC-2235June, 2009.1.04 SAMPLES:A
Page 26:
FTWIC-2235June, 2009.I. Shop drawin
Page 29 and 30:
7. Product identification and locat
Page 31 and 32:
FTWIC-2235June, 2009.describe the w
Page 33 and 34:
DEPARTMENT OF TRANSPORTATIONFEDERAL
Page 35 and 36:
Page 37 and 38:
PART 3.00EXECUTIONFTWIC-2235June, 2
Page 39 and 40:
01700 CONTRACT CLOSEOUTFTWIC-2235Ju
Page 41 and 42:
FTWIC-2235June, 2009C. EQUIPMENT WA
Page 43 and 44:
01710 CLEANINGFTWIC-2235June, 2009P
Page 45 and 46:
FTWIC-2235June, 2009G. Clean all pl
Page 47 and 48:
01730 OPERATIONAL AND MAINTENANCE M
Page 49 and 50:
FTWIC-2235June, 2009B. Index sheet
Page 51 and 52:
E. AS-BUILT DRAWINGS:FTWIC-2235June
Page 53 and 54:
J. COLOR AND PATTERNS:FTWIC-2235Jun
Page 55 and 56:
02100 SITE PREPARATIONFTWIC-2235Jun
Page 57 and 58:
03300 CAST-IN-PLACE CONCRETEFTWIC-2
Page 59 and 60:
FTWIC-2235June, 2009water-cement ra
Page 61 and 62:
2. SLUMP TEST:FTWIC-2235June, 2009S
Page 63 and 64:
ASTM C-39ASTM C-42ASTM C-87ASTM C-9
Page 65 and 66:
ACI 305RACI 306RACI 308ACI 309ACI 3
Page 67 and 68:
Concrete TemperatureFTWIC-2235June,
Page 69 and 70:
E. WATER:FTWIC-2235June, 20091. Cle
Page 71 and 72:
FTWIC-2235June, 2009provide a film
Page 73 and 74:
U. ZINC CHROMATE PRIMER:FTWIC-2235J
Page 75 and 76:
FTWIC-2235June, 2009be interpreted
Page 77 and 78:
FTWIC-2235June, 2009plastic layer b
Page 79 and 80:
FTWIC-2235June, 2009L. Clean the su
Page 81 and 82:
FTWIC-2235June, 2009During periods
Page 83 and 84:
3.18 ALUMINUM OR STEEL IN CONTACT W
Page 85 and 86:
FTWIC-2235June, 2009completely fill
Page 87 and 88:
05500 MISCELLANEOUS METALSFTWIC-223
Page 89 and 90:
F. AMERICAN WELDING SOCIETY (AWS) S
Page 91 and 92:
3003 Sheet, tube or pipe5005 Genera
Page 93 and 94:
FTWIC-2235June, 2009exterior concre
Page 95 and 96:
2.07 ARCHITECTURAL EXPANSION JOINT
Page 97 and 98:
G. WINDOW SILL:FTWIC-2235June, 2009
Page 99 and 100:
B. Generally use the following fast
Page 101 and 102:
07921 CAULKING AND SEALANTSFTWIC-22
Page 103 and 104:
H. SEALANT, POLYURETHANE:FTWIC-2235
Page 105 and 106:
FTWIC-2235June, 2009caulking with a
Page 107 and 108:
08110 METAL DOORS AND FRAMESFTWIC-2
Page 109 and 110:
FTWIC-2235June, 20093. Ship door fr
Page 111 and 112:
Page 113 and 114:
1.04 SUBMITTALS:FTWIC-2235June, 200
Page 115 and 116:
FTWIC-2235June, 2009101. Fire hardw
Page 117 and 118:
FTWIC-2235June, 2009Square face, sq
Page 119 and 120:
FTWIC-2235June, 2009C. Adjust and c
Page 121 and 122:
THIS PAGE IS INTENTIONALLY BLANK.
Page 123 and 124:
PART 2.00PRODUCTSFTWIC-2235June, 20
Page 125 and 126: FTWIC-2235June, 20093. Sound Seals
Page 127 and 128: 09260 DRYWALL CONSTRUCTIONFTWIC-223
Page 129 and 130: FTWIC-2235June, 2009E. Cooperate wi
Page 131 and 132: 2.02 SOUND ATTENUATION INSULATION:F
Page 133 and 134: 3.05 SUSPENDED CEILINGS:FTWIC-2235J
Page 135 and 136: FTWIC-2235June, 2009utility holes w
Page 137 and 138: 09509 ACOUSTICAL CEILINGS AND SUSPE
Page 139 and 140: FTWIC-2235June, 20091.06 DELIVERY,H
Page 141 and 142: FTWIC-2235June, 20093.03 FIELD QUAL
Page 143 and 144: 09661 RESILIENT FLOORINGFTWIC-2235J
Page 145 and 146: FTWIC-2235June, 2009H. FINISH:A non
Page 147 and 148: THIS PAGE IS INTENTIONALLY BLANK
Page 149 and 150: PART 2.00PRODUCTSFTWIC-2235June, 20
Page 151 and 152: FTWIC-2235June, 2009THIS PAGE IS IN
Page 153 and 154: B. Product data sheets for each pai
Page 155 and 156: 2.02 COLORS AND TINTS:FTWIC-2235Jun
Page 157 and 158: FTWIC-2235June, 2009applying water-
Page 159 and 160: PAINT SCHEDULEFTWIC-2235June, 2009P
Page 161 and 162: FTWIC - 2235June 2009SECTION 099113
Page 163 and 164: FTWIC - 2235June 2009A. Examine sub
Page 167 and 168: 1.07 JOB CONDITIONS:FTWIC-2235June,
Page 169 and 170: 3.03 CLEAN AND ADJUST:FTWIC-2235Jun
Page 171 and 172: 10281 BUILDING SPECIALTIESFTWIC-223
Page 173 and 174: FTWIC-2235June, 20092.05 CHANGING B
Page 175: THIS PAGE IS INTENTIONALLY BLANK
Page 179 and 180: K. TOWEL DISPENSER / WASTE RECEPTAC
Page 181 and 182: THIS PAGE IS INTENTIONALLY BLANKFTW
Page 183 and 184: .FTWIC-2235June 20091.04 SUBMITTALS
Page 185 and 186: 1.05 STANDARDS:.FTWIC-2235June 2009
Page 187 and 188: .FTWIC-2235June 2009WW-C-581 Condui
Page 189 and 190: .FTWIC-2235June 2009PART 3.00EXECUT
Page 191 and 192: .FTWIC-2235June 2009B. Use laminate
Page 193 and 194: .FTWIC-2235June 2009switch) is a po
Page 195 and 196: .FTWIC-2235June 2009ATTACHMENT 2Mot
Page 197 and 198: 16111 CONDUITSFTWIC-2235June 2009PA
Page 199 and 200: K. HUBS:FTWIC-2235June 2009FOR USE
Page 201 and 202: FTWIC-2235June 2009I. Route and sus
Page 203 and 204: FTWIC-2235June 2009location and dep
Page 205 and 206: 16115 WIREWAYSFTWIC-2235June 2009PA
Page 207 and 208: 16120 600 VOLT WIRES AND CABLESFTWI
Page 209 and 210: FTWIC-2235June 2009F. The Contracto
Page 213 and 214: E. GROUNDING CONNECTIONSFTWIC-2235J
Page 215 and 216: THIS PAGE IS INTENTIONALLY BLANKFTW
Page 217 and 218: FTWIC-2235June 2009C. CAST BOXES:Ca
Page 219 and 220: THIS PAGE INTENTIONALLY BLANKFTWIC-
Page 221 and 222: FTWIC-2235June 2009C. FLUSH-MOUNTED
Page 223 and 224: 16140 WIRING DEVICESFTWIC-2235June
Page 225 and 226: FTWIC-2235June 2009ganged face plat
Page 227 and 228:
Page 229 and 230:
D. EXHAUST FAN THERMOSTAT:FTWIC-223
Page 231 and 232:
THIS PAGE IS INTENTIONALLY BLANKFTW
Page 233 and 234:
PART 2.00PRODUCTSFTWIC-2235June 200
Page 235 and 236:
PART 3.00EXECUTIONFTWIC-2235June 20
Page 237 and 238:
16170 DISCONNECTSFTWIC-2235June 200
Page 239 and 240:
Page 241 and 242:
PART 3.00EXECUTIONFTWIC-2235June 20
Page 243 and 244:
16190 SUPPORTING DEVICESFTWIC-2235J
Page 245 and 246:
FTWIC-2235June 2009L. Do not suppor
Page 247 and 248:
16195 ELECTRICAL IDENTIFICATIONFTWI
Page 249 and 250:
Page 251 and 252:
B. GROUND CABLES:FTWIC-2235June 200
Page 253 and 254:
FTWIC-2235June 20098. INTERCONNECTI
Page 255 and 256:
FTWIC-2235June 2009In highly humid
Page 257 and 258:
THIS PAGE IS INTENTIONALLY BLANKFTW
Page 259 and 260:
PART 2.00PRODUCTSFTWIC-2235June 200
Page 261 and 262:
FTWIC-2235June 20093.02 FIELD QUALI
Page 263 and 264:
16670 LIGHTNING PROTECTIONFTWIC-223
Page 265 and 266:
FTWIC-2235June 2009and UL 96A. Air
Page 267 and 268:
APPENDIX “A”
show all

specifications - FAACO - Federal Aviation Administration Contract ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?