specifications - FAACO - Federal Aviation Administration Contract ...

10805 TOILET ACCESSORIESFTWIC-2235June, 2009PART 1.00GENERAL1.01 WORK INCLUDED:Furnish labor and materials necessary to install toilet accessories, indicated on the drawings orand scheduled herein. Furnish fasteners and accessories required by the type of construction towhich they are connected. The hardware finish shall match the accessory finish.1.02 RELATED WORK COVERED ELSEWHERE:Wood Blocking Section 06101Drywall Construction Section 09260Toilet Partitions Section 101621.03 QUALITY ASSURANCE: [Not Used]1.04 SUBMITTALS:Submittals shall be in accordance with Section 01300, SUBMITTALS and shall include productdata sheets and a schedule which lists every accessory identified by the location which it is to beinstalled.1.05 REFERENCES AND STANDARDS:The applicable provisions of the following references and standards are hereby made a part of thisSection as if written herein in its entirety:Aluminum Association (AA) publications:"Designation System for Aluminum Finishes"1.06 DELIVERY AND STORAGE:Deliver products in protective cartons. Retain the products inside the cartons until used. Store ina storage shed or building.1.07 JOB CONDITIONS:A. Prepare and submit schedule with quantities, using the following schedule as a guide orreferral only; not a quantity takeoff. The Contractor shall be responsible for the accuracyof quantities.B. The Owner reserves the right to change from folding paper towel to roll type, and fromliquid or lather soap to a commercial product which includes a dispenser. Prior toordering toilet accessories, verify the type of toilet paper dispenser to be used.C. Each accessory item shall be complete with the necessary mounting plates, anchors, andfasteners. Concealed mounting plates shall be of sturdy construction and may beunpolished or unplated.10805-1