specifications - FAACO - Federal Aviation Administration Contract ...

FTWIC-2235June, 20092.05 CHANGING BENCH:Furnish and install bench consisting of floor brackets, seat support and wood slatted bench.Attach wood bench to brackets with wood screws. Each length of bench shall have not less thantwo (2) supports, nor shall supports exceed 48" inch centers. GOF Ltd, VZ7A or approvedequal.PART 3.00EXECUTION3.01 PREPARATION:Verify surrounding conditions. Provide blocking in drywall construction in accordance withmanufacturer's requirements, or as necessary to anchor accessory in position.3.02 INSTALLATION:A. GENERAL:Install accessories plumb, level and true, and in the correct plane using skilled mechanics.Securely anchor accessories to walls with the appropriate anchorage. Where necessary,provide wood blocking. Center or place accessories in reference to the fixtures' centerlines so that the accessories do not interfere with door swings.B. ACCESSORIES:Furnish accessories at the locations specified, and install the items in accordance with theManufacturer's instructions.C. METAL LOCKERS:Furnish and install metal lockers of the types and sizes indicated. Attach a polishedaluminum number plate having 2" inch, black numerals using split rivets at each locker.Anchor at the floor and at the backs to blocking installed as backup behind the lockers, inaccordance with the manufacturer's instructions.D. CORNER GUARDS:Furnish and install corner guards at outside corners of corridors. Install a continuousmetal retainer strip to the wall corner and snap the corner guard over the edge clips. Thecorner guards shall be the full height of the corridor partitions. Provide wood blocking indrywall construction as required.E. FIRE EXTINGUISHERS AND CABINETS:Install semi-recessed cabinets as detailed on contract drawings and per approved shopdrawings. Anchor all components firmly into position.10281-3