specifications - FAACO - Federal Aviation Administration Contract ...

FTWIC-2235June, 20092.03 CORNER GUARDS:Construction Specialties model SM-20; fabricated of vinyl acrylic with a thickness of .078"inches. The surface shall have a pebbled finish. Color as selected from manufacturer’s standardcolors.2.04 METAL LOCKERS:A. Metal lockers shall be as manufactured by Republic or approved equal, and shall conformto the following requirements:Lockers Type 1StyleTypeSizeTopsHandlesLocksNumber PlatesColorRepublic "Quiet" seriesTwo Person15"w x 18"d x 72" inchesFlat closureRecessedPadlock combination1" high x 2-3/4" inches wide, Black on AluminumAs selected from manufacturer’s standard colors.B. Doors and frames shall be fabricated of cold rolled and levelled sheet steel. Frames shallbe 18 gauge steel, bent to form right angles for rigid construction. Doors shall befabricated of 16 gauge steel with flanged sides. Doors shall have reinforced panelswelded to the inside of the doors with voids filled with sound absorbing material.C. Hinges shall be two (2") inches wide, full loop design with tight pins, and welded to theframe and riveted to the door.D. The body of the locker shall consist of frame and sheet steel sides. The tops, bottoms andshelves shall be made of cold rolled steel sheets with flanged or rolled edges, riveted tothe sides and the back of the locker. Fasteners used in the construction of the locker shallbe zinc-plated.E. Each locker shall have one (1) shelf, one (1) double hook on the back wall, and two (2)single prong wall hooks at the sides.F. The lock shall be a positive, automatic type lock with pre-locking features. The lock barshall be a 20 gauge, cold rolled, formed steel, channel shaped design with tamperprooffeatures. The latch shall be a one-piece, self-contained, spring steel latch, designed to beeasily removed from the lockbar for replacement. The lockbar shall be of double channelconstruction and insulated from the door metal.G. The lockers shall have ventilation louvers at the doors along the bottom door panel andperforations in the metal backs near the top of the locker.10281-2