specifications - FAACO - Federal Aviation Administration Contract ...

10281 BUILDING SPECIALTIESFTWIC-2235June, 2009PART 1.00GENERAL1.01 WORK INCLUDED:Furnish labor, materials, equipment and incidentals necessary to install specialty items includinganchors, screw plates, bolts, toggle bolts, expansion shields, set screws, etc., required by the typeof accessory selected and by the type of construction to which they are connected. Hardwarefinish shall match the accessory.1.02 RELATED WORK COVERED ELSEWHERE:Miscellaneous Metals: Section 05500Wood Blocking Section 061011.03 SUBMITTALS:Submittals shall be in accordance with Section 01300, SUBMITTALS and shall include productdata sheets and specifications for all products. Furnish manufacturer's full range of availablecolors for any item which requires color selection. Submit samples only when requested by theContracting Officer, or when specified. Samples will be returned, and approved samples may bebuilt into the construction.1.04 DELIVERY HANDLING AND STORAGE:Products shall be shipped to the site in original protective cartons, having the manufacturer'sname and model attached. Products will remain inside protective cartons until erected. Storeinside building or storage sheds.1.05 JOB CONDITIONS:Obtain field measurements for any item required to be fitted into the construction. Verifyconditions at the site where products are to be installed. Coordinate work with other trades at thesite.PART 2.00PRODUCTS2.01 FIRE EXTINGUISHERS:Fire extinguishers shall be Larsen or approved equal and bear a class 2A rating. Coordinate fireextinguisher with cabinet.2.02 FIRE EXTINGUISHER CABINETS:Cabinets shall be equal to Larsen or approved equal; similar to Larsen "Cameo" series, "Flameshield"2-hour rated cabinet model No. SS C2409-5R with 2 1/2" trim for semi-recessedprojection. Outside trim dimensions shall be 27 1/2" H x 13" W with clear bubble break glassand black letters.10281-1