specifications - FAACO - Federal Aviation Administration Contract ...

1.07 JOB CONDITIONS:FTWIC-2235June, 2009A. Contractor shall make complete field measurements at each louver location and fabricatethe louvers to the dimensions required to fit the opening. Include field dimensions on theshop drawings.B. Provide means for maintaining alignment of blades in abuttingsections of louvers having concealed mullions.PART 2.00PRODUCTS2.01 MATERIALS:A. ALUMINUM:Extruded aluminum shapes, alloy 6063-T52.B. GALVANIZED STEEL:Commercial grade, paint grip galvanized steel conforming to ASTM A-123 and A-386.C. INSECT SCREEN:16 x 18 mesh 5056 alloy aluminum, color to match louver.D. BIRD SCREEN;1/2 x 1/2 mesh, 0.063 inch diameter aluminum wire, color to match louver.E. ANCHORS:Anchors suited to the particular application, stainless steel or other non-corrosivematerials.F. BITUMINOUS PAINT:2.02 FABRICATIONS:A heavy bodied gilsonite and asphalt compound such as Gulf States Asphalt Company"GulfSeal # 201, or approved equal.A. ALUMINUM LOUVERS:Fabricated of extruded aluminum alloy 6063-T52 assembled completely by helic arcwelding. Frames shall be .125 inch thickness extruded aluminum with closed channelconstruction. Blades shall be .081 inch thickness. Stationary blades shall be fabricatedwith an extrusion which creates a rain stop design.10240-2