specifications - FAACO - Federal Aviation Administration Contract ...

FTWIC – 2235June 2009PROJECT CONDITIONSA. Apply paints only when temperature of surfaces to be painted and ambient air temperatures are between 50and 95 deg F.B. Do not apply paints in snow, rain, fog, or mist; when relative humidity exceeds 85 percent; at temperaturesless than 5 deg F above the dew point; or to damp or wet surfaces.1.7 EXTRA MATERIALSA. Furnish extra materials described below that are from same production run (batch mix) as materialsapplied and that are packaged for storage and identified with labels describing contents.1. Quantity: Furnish an additional 5 percent, but not less than 1 gal. of each material and colorapplied.PART 2 -PRODUCTS2.1 MANUFACTURERSA. Manufacturers: Subject to compliance with requirements, provide products by one of the following:1 Benjamin Moore & Co.2 Kelly-Moore Paints.3 PPG Architectural Finishes, Inc.4 Sherwin-Williams Company (The).2.2 PAINT, GENERALA. Material Compatibility:1. Provide materials for use within each paint system that are compatible with one another andsubstrates indicated, under conditions of service and application as demonstrated by manufacturer, basedon testing and field experience.B. Colors: As indicated on the drawings.2.3 TEXTURED AND HIGH-BUILD COATINGSA. High-Build Latex (Exterior): MPI #40.1. VOC Content: E Range of E1.PART 3 -EXECUTIONEXAMINATION